We are using ubuntu 10.04 desktop version.ls > /dev/lp0 permission denied in user account we need user can access lp0 /usblp0. Our printing module is lp0 writing technology example dir >prn.
View 3 Repliesi've query regarding, user creation in Linux( RHEL 5), i.e, i've created a user ([root@localhost ~]#useradd slash ) and switched into that user, but am not able to run commands in it......It's displaying a message saying, PERMISSION DENIED. Do we need to provide any permissions while creating a user
View 7 Replies View RelatedI have configured samba server.My requirement was that the path which i have to share was /srv/www/htdocs.With this the shared path for developer user was /srv/www/htdocs/projects.
So in the smb.conf file i made the entries as following:
After that root user was able login to both /srv/www/htdocs and also project folder and developer was only able to login to projects folder.That was according to my requirement but now the problem is that when developer is trying to edit any file in projects folder he is getting error that you dont have permissions to change this file.But developer should be able to edit any files. What changes i need to do now.
I'm using ubuntu,i have a bin file under my /usr/bin, if i run the command under root user i'm getting no problem an it works fine,if i try it in with differnent user im getting
Code:
semctl:premission denied
so how can i edit my bin file and change it to right permission
I created a user called gdev.
As root, I made a dir /var/www/html/test
I have done these same steps on numerous machines. However, in this instance, gdev cannot cd into test/
I am in the process of setting up a new server (Debian - Lenny - now updated to Squeeze) and every things were going fine. But unfortunately from today , whenever a user login to ftp, it says
550 permission denied and not able upload / edit or remove any files ( i am able to see all files and folders)
Yesterday it was working fine..
I tried using bot Pure Ftp and Proftp and the issue is common
What I am trying to do is
add a unix user exalmple through adduser command with default directory for the user as /var/www/example.com (shell enabled)
owner of example.com is example
and using the above user name and password to ftp files to the folder
I have a secondary disk which holds a /home directory structure from a previous install of Linux. I installed a new version on a new primary drive and mounted this secondary drive as the new /home. Problem is, even though the users are the same names and I can access the home directories for the users, I cannot login directly to their home directories, as I get the following error: -
Code:
login as: [me]
[me]@[machine]'s password:
Last login: Wed Jan 6 18:34:33 2010 from [machine]
Could not chdir to home directory /home/[me]: Permission denied
[[me]@[machine] /]$
Now, since the usernames are correct and the users are in the passwd file with the correct home directory paths, could it be user ID's that are different or something else? It's not as though I cannot access the home directories for the users, simply that I cannot log directly into them from a login prompt.
In user mode [non-root] linux machine, tried to bind a socket by using a"ioctl(iInterfaceSocket, SIOCSIFADDR, &stCommand)". I am getting error 13 -> Permission denied because of user mode. If change from usermode to kernel mode everything works fine.I need to bind the socket in user mode only, please suggest solution for the abovewhile explaining the above,
View 2 Replies View Relatedi was trying to execute the following on Kubuntu.
Code:
echo 0 > /proc/sys/vm/vdso_enabled
But it says "permission denied". Probably I need root user rights. How to get it in Kubuntu?
The root user of Linux doesn't have permission to read/write a regular file, unless all users have permission to read/write this file, like below:
drwxrwsrwx ....... file_name
However the owner of the file can still read/write this file.
AND:
0) not the problem of execution, just read/write
1) not the problem of device because regular user can read/write it.
2) the result of command id:
uid=0(root) gid=0(root) groups=0(root)
so I don't think it's the problem of group.
I'm hoping someone can help me out with this issue I'm having using acl(s). I have a user I want to grant access to logs I have stored on my server. I am doing this by setting up an acl to that directory where the logs are stored. My settings seem to look fine, however I cannot read or even reach the directory with the said user; we'll call him "userP".
Here is my code:
To ensure userP has access to the parent directory (jboss) code...
Not sure what I'm doing wrong here: there are no errors in the logs; just "Permission denied" however I try to get to the directory.
Does anyone know what I'm doing wrong?
On the current machine:> su - username (it works)> ssh username@localhost (doesn't work)
What could be the problem?
Since lucid was installed, I can no longer access my floppy drive. I try creating an image on it and this happens:
$ dd if=a.img of=/dev/fd0
$ dd: opening `/dev/fd0': Permission denied
How do I get permission to do this? I'm the only user and am an administrator.
I am installing Oracle 11g on Oracle Enterprise Linux 5.0 32 bit (virtual machine)i did all the mandatory steps, i am trying to run the installer but i am facing the below:bash: ./runInstaller: /bin/sh: bad interpreter: Permission deniedknowing that the run isntaller is found in an iso file, in which i linked the VMwarre CD/DVD drive to it
View 4 Replies View Relatedi am trying to make my SSH-server more secure on my unbuntu server. And i want to do a little modifiing to the /etc/ssh/sshd_config folder. When i try to accsess it is says permission denied if i do sudo /etc/ssh/sshd_config it says command not found.
View 3 Replies View RelatedI'm using the find command in a PHP script like this to update permissions on all files but not directories:
<?php
// whole bunch of code
exec("find /var/www/vhosts/mydomain.com/httpdocs/path/to/some/directory -type f -exec chmod -R 440 {} ;");
[code]....
After I type sshd: 192.168.1.11 : allow and
sshd : ALL : Deny
I can't access hosts.allow or deny any more.
It says "Permission denied"
Before I typed that, I can access hosts.allow and deny.
By the way, I was wondering what command to edit hosts.allow.
For example, I want to put sshd: xxx.xxx.xxx.xxx : allow in that file.
when i logging with root then i saw message "permission denied" Then i changed root shell directory "usermod -s .usr/ root" but it says "permission denied" again. what is the default shell directory, or what can i do for change permissions.
View 1 Replies View RelatedI am not sure if this is posted somewhere else, if it is sorry. Anyways I downloaded files to my desktop from firefox and i need them to be in usr/local file, but if i try to put it in there it tells me permission denied. Is there anyway around this?
View 5 Replies View RelatedI tried writing zreos to my HD but it denied permission. How do I get around that ?
View 6 Replies View RelatedIf I run this as su I get the same thing. If I log on as root user It is the same as well
View 5 Replies View RelatedI have created user, group, gave permission chmod and chown with -R option. But when i try to enter into the directory for that created the user and group, I can not enter into.
View 4 Replies View RelatedWhen I create a folder in the system, it's created successfully
Code:
[test@localhost localhost ]$ cd test/
-bash: cd: test/: Permission denied
drw-rw-r-- 2 test testinstall 4.0K Sep 16 18:51 test
[root@mail tmp]# ./PE1650_RAID_FRMW_LX_R168387.BIN-bash: ./PE1650_RAID_FRMW_LX_R168387.BIN: Permission deniedalso get it when trying to run[root@mail tmp]# ./ESM_FRMW_LX_A37_R117418.BIN-bash: ./ESM_FRMW_LX_A37_R117418.BIN: Permission denied
View 2 Replies View RelatedI write following script.
#!/bin/bash
TEST=$(ifconfig | grep "ppp")
if [ -z "$TEST" ]
[code]....
I have some files lying around in /root/bla/, all these files are 644 and /root/bla/ is 755. Still, when I try (as a different user) to cp /root/bla/file ., I get a "cp: cannot stat: Permission denied". I also cannot ls /root/bla/, I also get a Permission denied... what gives?
View 3 Replies View RelatedI am trying to put a file from one linux machine to my other linux machine. There is absolutely no problem in downloading the file i.e. performing the "get" operation but when I try to upload or "put file" from my host1 to host2 it throws error "Error 0 Permission denied". I am able to put files from host2 to host1 without any problem but not from host1 to host. Infact if I try to tftp even localhost on host2 it throws the same error. Here is my
/etc/xinetd.d/tftp file for host2
service tftp {
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -c -s /tftpboot
#disable = yes
disable = no
per_source = 11
cps = 100 2
flags = IPv4
}
And permissions on /tftpboot are 777
[root@LinuxServer /]# ls -ld /tftpboot/
drwxrwxrwx 2 root root 4096 Jan 6 05:21 /tftpboot/
[root@LinuxServer /]# ls -l /tftpboot/
total 16
-rwxrwxrwx 1 root root 11 Jan 6 06:16 new_test
-rwxrwxrwx 1 root root 12 Jan 5 06:02 test2
And the command which I am using is :
[root@LinuxServer /]# tftp localhost -c put new_test
Error code 0: Permission denied
And ya here is /etc/sysconfig/selinux file is as under :
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
SELINUX=permissive
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted - Only targeted network daemons are protected.
# strict - Full SELinux protection.
SELINUXTYPE=targeted
On an Ubuntu 9.10 (Karmic Koala) machine, I burned a CD from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso.The CD now contains an executable and some files. I tested the CD by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message:bash: ./FPS1_1: Permission denied.I can open other files like text documents (the executable also comes with shared libraries).I realized I had burned the CD as root so I burned another one as another user but I still have the same problem.
View 2 Replies View RelatedI am working currently on my server on an issue, I configured the SSH Deamon that only people who have a valid ssh-key can login on to the server, and kicked the password option. Now I've added a user account git. I navigate to his home folder created the folder ".ssh" and created in that folder the file "authorized_keys" I copied my public key in there. Now on my local machine I added that identity (via ssh-add) and I wanted to connect to my server. but when I'm trying to login myself I can't the only message I get is "Permission denied (publickey)."
View 1 Replies View RelatedHow is it possible that I get perm denied when I'm copying files in console.
View 1 Replies View Related