What I want to do is hook up a mic to my computer and have the sound play through my bluetooth headset. Can this be done? I cant seem to figure out at all. It play fine through the computer speakers but nothing in BT. I have Ubuntu 10.04
View 7 Repliesafter installing ubuntu , i can hear sounds of songs in both headset & PC. why?
View 4 Replies View Relatedshort version: My bluetooth headset keeps disconnecting.Full version:I'm using a 64-bit distro of 9.10 on a 1.6 GHz AMD Turion 64 laptop, with an external bluetooth dongle and a bluetooth headset. The dongle is recognized right off, the headset pairs perfectly through the bluetooth preferences panel, and sound redirects through the soundpreferences panel... For about 2 minutes. I know, it's odd, but every 2 minutes or so bluetooth disconnects from the headset. Sound shifts to the speakers, the applications don't miss a beat, and when I reconnect the headset through the bluetooth control it shifts right back to the headset. This happens regardless of other programs running. I tried it with no other applications running, and with a fairly heavy load, and it reoccurs.Here's the odd part: I had the CPU set on "Ondemand," to save battery power, but when I plugged in and shifted it to "Performance," it started happening ever 4 minutes or so...I've Googled around and found plenty about getting my headset to connect, but nothing about KEEPING it connected
View 7 Replies View RelatedSo I picked up a really cheap BT USB dongle (~$2) and can use the mic just fine but audio won't work. code...
I figure that I'm just overlooking something (I checked all the volume sliders and "mute" checkboxes I could find) or that I need to get a better BT dongle. Any thoughts?
I have a bluetooth headset that I hope I can get to work with Ubuntu 10.10 so that I can use it with Skype.I am using these instructions to get it to work. However, there are some differences between my experience and what I expect from the instructions, ultimately leading to some errors.First, I should mention that according to Blueman device manager, it would seem I have successfully paired my device. It has a MAC address. I have attached a screen shot of the interface:It sure looks like the device is recognized by my system. However, when I get to step 5, the MAC address of the one device I see is not the same as the one in the interface above:
Code:
$ hcitool scan
Scanning ...
[code]....
I have a Sony Ericsson HBH-PV700 bluetooth headset that came packaged with a Sony Ericsson K510i phone.I was hoping to be able to use it under Ubuntu 10.10 Maverick Meerkat as a headset and POSSIBLY as a microphone...I don't think it supports a2dp, so maybe this is a waste of effort. The Bluetooth adapter I'm using is Bluetooth 2.0 compilant, as far as I know. (It may be 1.2, but there's no way it's 1.1 compilant).
I have paired it with my PC and tried finding it as output and input in the Sound Preferences...no option. There's nothing in [System > Preferences > Multimedia Systems Selector] either! I have also tried the instructions at the Ubuntu Community Help Pages for Bluetooth Headset. However, my system fails to initialise the module-alsa-sink and module-alsa-source via the pactl command .I don't even know if it is possible with this device, but I'm willing to give anything a try! P.S. I'm not comfortable with installing a ton of packages just for one thing, but if there's no other option it's fine, I guess.
I have successfully paired my Jabra Headset (Ubuntu Intrepid 64 bits) but no sound comes through the headset.
Code:
btsco -v -f -r -s 00:07:A4:07:3A:BB
btsco v0.42
[code]...
Anyone know what causes static/crackle noise in bluetooth headset. Everytime I listen to stuff on ..... I have this problem. I didn't always have it either. Also viewing ..... video on other site other then ..... it keep like flashing the emblem to add it to a site, but its really quick. I'm using Firefox on Ubuntu 9.10.
View 1 Replies View RelatedIm using a Sennheiser VMX100 one-ear headset and I try to pair it with my Ubuntu 11.04. But the bluetooth manager doesnt find it. What can I do?
View 2 Replies View RelatedI am on Fedora 12.I have a USB bluetooth dongle and a bluetooth headset.The dongle gets recognised fine and I can pair the headset as well. PulseAudio sees the input and output of the headnet perfectly. It also runs perfectly for about one minute, and then the headset is disconnected. Why?During the sixty seconds where everything works, I also hear a beep (about every 20 seconds).After disconnecting I have to put the headset back into pairing mode and then remake the connection. And then everything works for another minute, and then the headset is disconnected again. Why
View 1 Replies View RelatedI have compiled Bluez 4.50 for arm and have installed it. The bluetoothd daemon is running fine. But when I enabled the blueoothd -nd & i get an error saying, Failed to access HAL. After a bit of digging, i tried installing hal on the board in vain. The hcitool scan runs fine and shows all the devices in the vicinity. I compiled agent.c from the test folder and am using it to pair in command line because i donot have python on the board. I see the packets getting txd and rxd in the hcidump when i try to pair with the headset. even the light in the headset changes after pairing. but i donot hear any sound when i play a *.wav file.
View 1 Replies View Relatedhas anyone experiences with the bluetooth headset DR-BT101 from Sony under Ubuntu?
View 2 Replies View RelatedI used my bluetooth headset and now it won't let me use my built in speakers.
Here is my sudo lshw -c sound:
Code:
I am using Debian sid(xfce). I have a bluetooth dongle and a bluetooth headset. The headset supports only the HFP and HSP profiles.
I think I have installed all the necessary packages but I have problems connecting to it. Pairing works, but connecting via a profile doesn't.
The dongle works great for transferring files to other devices.
When I tell blueman to connect to either profile of the headset it connects for maybe one second and then immediately disconnects with the error:
Failed to connect: org.bluez.Error.Failed
I'm running Slackware with 2.6.26 kernel. I've got bluez-utils,libs version 3.26 (Slackware 12.1 precompiled package), and kdebluetooth. I'm using a Digicom Palladio Usb Bluetooth adapter. In general, bluetooth seems to work; I can send files to my Nokia phone. Now, I've got this Bluetooth stereo headset (brand rather unknown, and I've thrown the package away, I've only got the little user manual, and there is no indication on who built this thing).
This is what I've tried so far:
- turn the headset on and turned pairing mode on;
- kbluetooth -> Configuration -> Input devices (input?) -> Search;
- kbluetooth finds the headset and asks that I insert the pin code; a little star appears next to the name of the headset ("Stereo Headset"), but after a couple of seconds disappears and at the same time I hear a beep coming from the headset (disconnection?). Anyway, just before the beep, noise came from the headset (as if it had turned on), then, after the beep, nothing.
- Important thing: the headset manual says the Usb dongle must support A2DP and AVRCP. I don't know how to find out whether my dongle supports them, anyway, if I execute 'sdptool', in the "Services" section I get: [Code} ....
Does this mean that bluez/my usb dongle doesn't support A2DP? Anyway, I followed the instructions on "Bluez - Trac - AudioDevices" [URL] and added the specified part to .asoundrc. Of cource, even if I tell xine to use "bluetooth" as pcm device, it says the device is unknown.
I am running Ubuntu 10.04 in my Dell Xps 1530. I was using BH200, dell bluetooth headset, with windows 7. I had no luck connecting the same headset with the ubuntu karmic and neither can I do it after upgrading to 10.04. I have gone through a lot of the stuff given in many forums. But all of that is for jaunty(ubuntu or before.
View 9 Replies View RelatedI have a bluetooth headset with both support of HSP/HFP and A2DP. My goal is to connect this headset to my cell phone (over HSP/HFP) and to the PC (over A2DP) simultaneously, but ubuntu always connects both profiles.
I've tried to set following values in /etc/bluetooth/audio.conf:
Code:
Having trouble with pulseaudio (0.9.21, Debian Squeeze) failing to properly recognize a Turtle Beach X-ray headset?
My tv connects fine, playing Dolby Digital through it without issue, but my computer doesn't. (A possible side effect: Flash videos play in slow-mo when the headset is connected to the computer's bluetooth adapter, but not when the headset is disconnected.)
Is there a way to tell Pulseaudio to give the headset 6 channels?
Some info:
Code: Select all~ » pulseaudio --dump-modules
module-alsa-card ALSA Card
module-alsa-sink ALSA Sink
module-alsa-source ALSA Source
module-always-sink Always keeps at least one sink loaded even if it's a null one
module-augment-properties Arugment the property sets of streams with additional static information
module-bluetooth-device Bluetooth audio sink and source
[Code] ....
I recently bought a IOgear USB bluetooth adapter and a Sony DRBT101/BLK bluetooth headphones to use with my computer.Whenever I try to make a call using these headphones with skype, I can speak for say 10 seconds and then the headset disconnects completely from the system. I then have to reconnect the headset by switching it off and on. I do not have this problem listening to music using A2DP. It works fine with my mobile phone.When I change the profile to Telephony Duplex (HSP/HFP), it shows up as hands free, I thought it should be headset in blueman manager. My friend uses Plantronics headset with is Dell laptop with built in bluetooth and he says his comes up as headset not hands free. Could this be causing the problem?
View 1 Replies View RelatedI'm running Ubuntu 9.10 (Karmic Koala) with Skype, and I can't get the microphone to work. I can hear them, but they can't hear me. I tried the same headset with my Windows system, and it works fine, so the headset is OK.
I looked at "Sound Preferences", and noticed that when I click on the "Input" tab, the area where you can adjust the volume is set at the minimum, and grayed out, so I can't adjust it.
I can't hear the music playing on my speakers, BUT i can hear the music playing in my headphones when i insert my headphones jack.
I have tried configuring aslamixer, tried configuring the sound devices but nothing seems to work. i have also installed a lot of music players such as asla player, audacity and so on. i also tried configuring the aslamixer from the terminal but it did's work as well.
I must add that i have linux ubuntu netbook remix 9.10 i386 installed and windows xp home edition sp3. In windows, i have no problem playing any sound. (I am new to linux <2 days> but very experimented with windows <17 years>).
i have a bluetooth modem (BlueSMiRF) that is connected to Arduino Duemilanove. I am trying to see serial communication messages from the bluetooth modem.
I have Blueman Device Manager that enabled SPP (Serial Port) and it says :
Code:
Serial port connected to /dev/rfcomm0
How do I see the serial communication on this?
I tried on console
Code:
$rfcomm listen 0
but it's stuck at
Code:
Waiting for connection on Channel 1
Is there any other way to listen (and also send) to serial comm msgs on bluetooth?
When i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on.
the bluetooth dameon is on, and when i press the turn on button, nothing happens.
in windows the stick works fine.
The bluetooth manager does not detect a bluetooth dongle .trying to use ndiswrapper to fix.I installed device manager and the results are shown below.i downloaded the windows driver suite. It has 4 .exe self extracting driver archives and a setupconfig.ini. The .ini file is below.I was able to extract one of the 32bit archives on a windows machine and it had about 8 .inf files that are titled weird and would not install properly using ndiswrapper probably because im using the 64-bit architecture. there are 2 64bit .exe's in the driver download, but how can i extract them in ubuntu and do i really need to install all 8 .inf files. also do i actually need to make a .inf file? if so how?
Asus - BT211 mini bluetooth dongle
Code: http:[url].... - windows driver under download section.
Device manager
Code:
Model: Unknown model (id =0x3000)
Vendor: atheros Communications, inc[code]....
I'm using fedora 13 x86_64 on amd machine. I use usb bluetooth dongle. The bluetooth service doesn't start at all. When I click on bluetooth icon-preferences-turn bluetooth on, after some time it says, bluetooth is disabled. What should I do to enable bluetooth?
View 1 Replies View RelatedI just bought a Bluetooth dongle for my laptop with fedora on it and cannot get the Bluetooth service to start. Tried to do the same on my imac running Fedora and the same thing happened, it said service refreshing and never did.
View 14 Replies View RelatedI have gotten my microphone working, this was an issue for a long time.
Now I can hear myself through my headphones so I know the computer is "hearing" it.
But... I still show "No Input Devices Available" in my Pulse Audio volume control so I'm still not able to record... which of course is my whole point.
I'm having an issue where I can't hear any sounds in Ubuntu 10.04 (64-bit). In the Sounds Preferences, under Hardware it correctly lists "SB X-Fi Xtreme Audio". The sound is not muted, and I've tried cycling through various Profile options in the hardware tab. Since it is correctly detected, I'm thinking that there might be something simple that I'm missing here. The motherboard is an MSI P6N Diamond: [URL]
[Code]....
Ich have an iMac with ubuntu 10.10. I had a few problems with my sound (it didn't work at first) but then i got it. But only in the Startup screen, where you enter your username. There you hear the startup-sound. When i log in and go to rhytmbox or ....., i don't hear anything. no os-sounds, too.
View 2 Replies View RelatedI have Ubuntu 10.10 installed in a notebook. Everything goes gone but the sound output, I can only hear the built in speakers, and I didn't find the headset output controls. I know there's no more mechanical switch as in the past, I mean, when you plug the headset it's is detected by the OS and the sound should come from that output, instead of the speakers, but that's not my case.
View 3 Replies View Related