Hardware :: Playing Music In Bluetooth Headset ?
Sep 10, 2009
I have compiled Bluez 4.50 for arm and have installed it. The bluetoothd daemon is running fine. But when I enabled the blueoothd -nd & i get an error saying, Failed to access HAL. After a bit of digging, i tried installing hal on the board in vain. The hcitool scan runs fine and shows all the devices in the vicinity. I compiled agent.c from the test folder and am using it to pair in command line because i donot have python on the board. I see the packets getting txd and rxd in the hcidump when i try to pair with the headset. even the light in the headset changes after pairing. but i donot hear any sound when i play a *.wav file.
View 1 Replies
ADVERTISEMENT
Jan 15, 2010
short version: My bluetooth headset keeps disconnecting.Full version:I'm using a 64-bit distro of 9.10 on a 1.6 GHz AMD Turion 64 laptop, with an external bluetooth dongle and a bluetooth headset. The dongle is recognized right off, the headset pairs perfectly through the bluetooth preferences panel, and sound redirects through the soundpreferences panel... For about 2 minutes. I know, it's odd, but every 2 minutes or so bluetooth disconnects from the headset. Sound shifts to the speakers, the applications don't miss a beat, and when I reconnect the headset through the bluetooth control it shifts right back to the headset. This happens regardless of other programs running. I tried it with no other applications running, and with a fairly heavy load, and it reoccurs.Here's the odd part: I had the CPU set on "Ondemand," to save battery power, but when I plugged in and shifted it to "Performance," it started happening ever 4 minutes or so...I've Googled around and found plenty about getting my headset to connect, but nothing about KEEPING it connected
View 7 Replies
View Related
Sep 22, 2010
What I want to do is hook up a mic to my computer and have the sound play through my bluetooth headset. Can this be done? I cant seem to figure out at all. It play fine through the computer speakers but nothing in BT. I have Ubuntu 10.04
View 7 Replies
View Related
May 3, 2011
So I picked up a really cheap BT USB dongle (~$2) and can use the mic just fine but audio won't work. code...
I figure that I'm just overlooking something (I checked all the volume sliders and "mute" checkboxes I could find) or that I need to get a better BT dongle. Any thoughts?
View 7 Replies
View Related
Jan 23, 2010
I am on Fedora 12.I have a USB bluetooth dongle and a bluetooth headset.The dongle gets recognised fine and I can pair the headset as well. PulseAudio sees the input and output of the headnet perfectly. It also runs perfectly for about one minute, and then the headset is disconnected. Why?During the sixty seconds where everything works, I also hear a beep (about every 20 seconds).After disconnecting I have to put the headset back into pairing mode and then remake the connection. And then everything works for another minute, and then the headset is disconnected again. Why
View 1 Replies
View Related
Jan 18, 2011
I have a bluetooth headset that I hope I can get to work with Ubuntu 10.10 so that I can use it with Skype.I am using these instructions to get it to work. However, there are some differences between my experience and what I expect from the instructions, ultimately leading to some errors.First, I should mention that according to Blueman device manager, it would seem I have successfully paired my device. It has a MAC address. I have attached a screen shot of the interface:It sure looks like the device is recognized by my system. However, when I get to step 5, the MAC address of the one device I see is not the same as the one in the interface above:
Code:
$ hcitool scan
Scanning ...
[code]....
View 4 Replies
View Related
Mar 9, 2011
I have a Sony Ericsson HBH-PV700 bluetooth headset that came packaged with a Sony Ericsson K510i phone.I was hoping to be able to use it under Ubuntu 10.10 Maverick Meerkat as a headset and POSSIBLY as a microphone...I don't think it supports a2dp, so maybe this is a waste of effort. The Bluetooth adapter I'm using is Bluetooth 2.0 compilant, as far as I know. (It may be 1.2, but there's no way it's 1.1 compilant).
I have paired it with my PC and tried finding it as output and input in the Sound Preferences...no option. There's nothing in [System > Preferences > Multimedia Systems Selector] either! I have also tried the instructions at the Ubuntu Community Help Pages for Bluetooth Headset. However, my system fails to initialise the module-alsa-sink and module-alsa-source via the pactl command .I don't even know if it is possible with this device, but I'm willing to give anything a try! P.S. I'm not comfortable with installing a ton of packages just for one thing, but if there's no other option it's fine, I guess.
View 1 Replies
View Related
Feb 22, 2016
I am using Debian sid(xfce). I have a bluetooth dongle and a bluetooth headset. The headset supports only the HFP and HSP profiles.
I think I have installed all the necessary packages but I have problems connecting to it. Pairing works, but connecting via a profile doesn't.
The dongle works great for transferring files to other devices.
When I tell blueman to connect to either profile of the headset it connects for maybe one second and then immediately disconnects with the error:
Failed to connect: org.bluez.Error.Failed
View 0 Replies
View Related
Mar 15, 2010
I have successfully paired my Jabra Headset (Ubuntu Intrepid 64 bits) but no sound comes through the headset.
Code:
btsco -v -f -r -s 00:07:A4:07:3A:BB
btsco v0.42
[code]...
View 2 Replies
View Related
Jun 6, 2010
Anyone know what causes static/crackle noise in bluetooth headset. Everytime I listen to stuff on ..... I have this problem. I didn't always have it either. Also viewing ..... video on other site other then ..... it keep like flashing the emblem to add it to a site, but its really quick. I'm using Firefox on Ubuntu 9.10.
View 1 Replies
View Related
Jun 16, 2011
Im using a Sennheiser VMX100 one-ear headset and I try to pair it with my Ubuntu 11.04. But the bluetooth manager doesnt find it. What can I do?
View 2 Replies
View Related
Feb 23, 2009
I'm running Slackware with 2.6.26 kernel. I've got bluez-utils,libs version 3.26 (Slackware 12.1 precompiled package), and kdebluetooth. I'm using a Digicom Palladio Usb Bluetooth adapter. In general, bluetooth seems to work; I can send files to my Nokia phone. Now, I've got this Bluetooth stereo headset (brand rather unknown, and I've thrown the package away, I've only got the little user manual, and there is no indication on who built this thing).
This is what I've tried so far:
- turn the headset on and turned pairing mode on;
- kbluetooth -> Configuration -> Input devices (input?) -> Search;
- kbluetooth finds the headset and asks that I insert the pin code; a little star appears next to the name of the headset ("Stereo Headset"), but after a couple of seconds disappears and at the same time I hear a beep coming from the headset (disconnection?). Anyway, just before the beep, noise came from the headset (as if it had turned on), then, after the beep, nothing.
- Important thing: the headset manual says the Usb dongle must support A2DP and AVRCP. I don't know how to find out whether my dongle supports them, anyway, if I execute 'sdptool', in the "Services" section I get: [Code} ....
Does this mean that bluez/my usb dongle doesn't support A2DP? Anyway, I followed the instructions on "Bluez - Trac - AudioDevices" [URL] and added the specified part to .asoundrc. Of cource, even if I tell xine to use "bluetooth" as pcm device, it says the device is unknown.
View 1 Replies
View Related
Sep 26, 2010
has anyone experiences with the bluetooth headset DR-BT101 from Sony under Ubuntu?
View 2 Replies
View Related
Jan 27, 2011
I used my bluetooth headset and now it won't let me use my built in speakers.
Here is my sudo lshw -c sound:
Code:
View 1 Replies
View Related
Sep 10, 2014
Having trouble with pulseaudio (0.9.21, Debian Squeeze) failing to properly recognize a Turtle Beach X-ray headset?
My tv connects fine, playing Dolby Digital through it without issue, but my computer doesn't. (A possible side effect: Flash videos play in slow-mo when the headset is connected to the computer's bluetooth adapter, but not when the headset is disconnected.)
Is there a way to tell Pulseaudio to give the headset 6 channels?
Some info:
Code: Select all~ » pulseaudio --dump-modules
module-alsa-card ALSA Card
module-alsa-sink ALSA Sink
module-alsa-source ALSA Source
module-always-sink Always keeps at least one sink loaded even if it's a null one
module-augment-properties Arugment the property sets of streams with additional static information
module-bluetooth-device Bluetooth audio sink and source
[Code] ....
View 1 Replies
View Related
Jun 23, 2010
I am running Ubuntu 10.04 in my Dell Xps 1530. I was using BH200, dell bluetooth headset, with windows 7. I had no luck connecting the same headset with the ubuntu karmic and neither can I do it after upgrading to 10.04. I have gone through a lot of the stuff given in many forums. But all of that is for jaunty(ubuntu or before.
View 9 Replies
View Related
May 18, 2011
I have a bluetooth headset with both support of HSP/HFP and A2DP. My goal is to connect this headset to my cell phone (over HSP/HFP) and to the PC (over A2DP) simultaneously, but ubuntu always connects both profiles.
I've tried to set following values in /etc/bluetooth/audio.conf:
Code:
View 2 Replies
View Related
Nov 28, 2010
I am using C++ and Gtk to make a music player. I was looking for some library that will allow me to play a music file, preferably mp3, wav, aac, and more if possible. Also, how can I get info on the file like the artist, album, genre, etc. Hopefully the library will do that also.
View 2 Replies
View Related
Aug 12, 2010
I recently bought a IOgear USB bluetooth adapter and a Sony DRBT101/BLK bluetooth headphones to use with my computer.Whenever I try to make a call using these headphones with skype, I can speak for say 10 seconds and then the headset disconnects completely from the system. I then have to reconnect the headset by switching it off and on. I do not have this problem listening to music using A2DP. It works fine with my mobile phone.When I change the profile to Telephony Duplex (HSP/HFP), it shows up as hands free, I thought it should be headset in blueman manager. My friend uses Plantronics headset with is Dell laptop with built in bluetooth and he says his comes up as headset not hands free. Could this be causing the problem?
View 1 Replies
View Related
Jan 22, 2010
There is a feature in MS Windows OS that allows users to play the songs on their mobile on the computer via bluetooth, i.e., the users can use the computer speakers as a bluetooth headset. Are there any ways or any software to do the same in GNU/Linux?
View 2 Replies
View Related
Jan 2, 2011
I have a set of i.Tech BluePro headphones and a Motorola USB adapter, my aim is to listen to music from my laptop through the headphones. I have successfully set up the bluetooth device with the Bluetooth preferences utility, it is detected and paired but how do I get the computer to direct its sound to this device? the sound preferences do not list my bluetooth device. The only reference to this task I have come across is here; [URL] not sure if this is relevant for 10.10, but when I try hcitool scan. Nothing is detected.
View 1 Replies
View Related
Jul 25, 2011
it's quite odd, because the other day it was playing my mp3 music fine. i can play videos videos etc. so it's banshees problem :s
View 5 Replies
View Related
Jul 22, 2009
I really like gnome-do..i installed the rhythembox plugin and Super + Space and typed some songs titles...and pressed enter, i suppose at this point rhythembox (which is already in system tray ) should play the song....but what actually happen...is nothing..literally. so what ? or how should i play a song from gnome-do !!
View 3 Replies
View Related
Mar 6, 2010
I've been having problems with it for months, assuming some bug fix would just happen, but it hasn't, so here I am.The general symptom is that I can sit listening to music for around 20-60 minutes, using audacious/banshee/whatever, and the music will make a crackling noise and suddenly stop. Killing pulseaudio and the application remedies the problem, but obviously that's not a solution.I have a ca0106 sound card. [edit: originally had emu10k1 here -- that's a sound card I have that's unused in the same system.]
/var/log/messages usually indicates a message like this, or something similar:
Mar 6 00:22:29 localhost pulseaudio[4872]: alsa-util.c: snd_pcm_avail() returned a value that is exceptionally large: 18446744073709542688 bytes (384307168155 ms).
[code]...
View 2 Replies
View Related
Jan 24, 2010
I'm currently running ubuntu 9.04. I'm able to mount data and MP3 audio CDs but I'm unable to mount and play regular audio CDs. When I try to mount it I get the following message:
Unable to mount Audio Disc Drive /dev/sr0 does not contain audio files.
Windows does not have any problems playing either the regular audio CDs or audio MP3 CDs.
View 1 Replies
View Related
Jun 5, 2010
My PPC iMac G3, 600 MHz, 768 MB ram machine (blue box) machine has 16 MB video ram and 256 MB backside L2 cache. When I insert a music CD, it doesn't seem to recognize it. Nor does an icon appear on the screen indicating that I loaded a disk. When I insert a movie, Lucid waits a moment, spins the disk, then ejects it after about 60 sec. Data disks act similarly, but no ejection. Disk spins momentarily, no icon appears on desktop, disk does not eject, No further action.
View 8 Replies
View Related
Jul 23, 2009
I was listening to some Chopin today and I thought how cool it would be if there would be a way to put the sound output of Amarok (or anything else, maybe line-in or microphone) through some effects that would make it sound like being read from a vintage vinyl disk. Or when listening atmospheric folk songs about forests, it would be really cool to add some echo or reverberation, so it would sound like a large forest, ooor... But you get the idea. Is there any nice way of putting Amarok's sound through JACK, and from then on through a sound effector?
View 1 Replies
View Related
Dec 23, 2010
My rhythm box crashes every time i play a song or try to transfer music to my ipod. It usually will play one song but then it crashes. Everything was working fine last night, then today it stopped working right.
View 6 Replies
View Related
Aug 10, 2010
When I started to play songs, I have the normal sound. However, after some time, the songs are still being played but there is no sound anymore. It is not for music player so I don't think it is a player problem. In addition, after I delete and reinstall the audio card, the sound comes back. I have another problem about sound card disturbing me. When I watch ..... using firefox, there is no audio from the video. However, I do have the audio when the chrome is used. What could cause that? I kind of believe those two problems are related. The problem happens after I upgrade my 10.3 to 11.2 and now I am using 11.3. Does that come from the new configuration conflicts with the old one?
View 5 Replies
View Related
Dec 4, 2010
I have an Ubuntu 10.04 desktop PC (desktop) that I access remotely, i.e. with no monitor and keyboard attached. I do this by making an ssh connection to "desktop" from my laptop (also running Ubuntu 10.04).
I have all my music stored on "desktop" and I want to play this remotely through the soundcard on "desktop" which is attached to a hi-fi amplifier, from my laptop.
I tried running, say, rhythmbox, on "desktop" through ssh X11 forwarding to my laptop but cannot play music - it says that the right codes are not installed although they are because I can use rhythmbox on "desktop" directly (attaching a monitor and keyboard to it).
View 4 Replies
View Related
