Some of my rather useful applications have stopped being useful after a fresh installation of lucid. In particular, the fonts rendered on emacs, openoffice and others look awful to unreadable. Attached is an example screenshot for emacs but it doesn't appear to be application specific. Also, I have a hunch it has to do with my graphics driver
(Linux-x86, Nvidia Driver v195.36.24 ona GeForce 6200 TurboCache).
I have some strange problem with rendering monospace fonts in FF and Epiphany. There is some attached example - most pages with some code blocks look like it, it is not possible to see the text, even after selecting it. I tried to change settings in FF of fonts, tried to change size, colors, font, but still it is not visible at all no matter what. However pages like that are displayed fine in "Chromium". Does anyone have an idea where do I begin solving this?
View 3 Replies View RelatedI'm trying to install the ms True type fonts on 11.04.
I typed the command: "sudo apt-get install ttf-mscorefonts-installer"
And, after a short wait the following screen appeared (added as an attachment)
And - I'm stuck. I can scroll up or down through the EULA with my scroll wheel or the arrow keys, but I cannot move on, I can't click on the OK, and no keypress does anything.
I tried to remove the installer with: "sudo apt-get remove ttf-mscorefonts-installer" and with the Ubuntu software center and both operations failed. The terminal advised me to reinstall before removal, which I can't.
I accidentally deleted my /etc/fonts/font-config file and now my fonts are all terribly out of whack in several applications including Synaptic, Chromium, Firefox, etc. How do I reset my fonts back to the Lucid Lynx default?
View 4 Replies View RelatedI am currently facing one issue with my network. I have several computers and this is what happens, everything works fine when I use the ip address, but when it comes to hostname.
-Windows computers can't ping/see the computer 5 (while it is running linux), but they can see computer 3 while running ubuntu 8.10 and computer 2 while on Mac OS X.
-computers 2 and 3 can see/ping everybody while on Mac/Linux.
-computer 5 can ping everybody.
-computers 1, 2, 3 and 4 (on every OS) can see/ping computer 5 while on windows xp.
Basically, the problem is with computer 5, it can see, but it is not seen by other computers (just when running ubuntu lucid)Computer 5 is supposed to be a printer server, so it must be seen by the others regardless of OS.When I ping computers 5 the TTL is 64, when I ping other computers, TTL is 128. I don't think this means anything, but I am not sure.Initially I thought this was a printer issue, but then I realized is something related to network when I tried to use ping/explore the computer 5 by ip/hostname (it works by ip, but not by hostname).Computer 5 is sending the hostname to the router properly, it appears in the dhcp client list.
I have installed SUSE 11.3 and I am using KDE4. I also installed the font "misc-console".
After installing the NVIDIA driver 256.53 the font misc-console becomes useless because it is displayed so much slanted that it is imposible to read. However, if I disable the NVIDIA driver (by replacing "nvidia" with "nv" in xorg.conf), then it works fine. It also works fine in KDE3 and the NVIDIA driver. So, it seems to be a combination between NVIDIA and KDE4. A lot other fonts are also overly slanted and unreadable (like "Sony fixed", "misc fixed", etc.).
If I launch konsole from a terminal, I receive the following warning:
konsole(6928) Konsole::TerminalDisplay::setVTFont: Using an unsupported variable-width font in the terminal. This may produce display errors.
Is there a way that I can use "misc-console" without having to uninstall the NVIDIA driver? I'm just used to this font for my terminal.
The same happens whether I install the driver manually or through YAST, 32 or 64 bit. The video card is NVIDIA 8400GS, the system Athlon 64 4400+
Can't install sp-auth code...
View 6 Replies View RelatedThis is a bit of an odd problem that's been happening to me recently. My home folder is a version of Fedora old, I've been using the same one between Fedora 11 and 12 (which I'm now using).
When booting up, I notice that my system fonts are not the ones I have manually set. They're the ugly version, whatever exact font it is. It's only when I select System->Appearances from the menu that the system seems to detect my seletions to use Liberation fonts in all areas, and then everything instantly switches to the more visually pleasing Liberation fonts. This is a strange bug, I was wondering if anyone has experienced this or can point me in the right direction?
I recently changed my Graphic card drivers from Nouveau to nVIDIA in Suse 11.3 KDE.
One thing I have noticed that initially I had been using various Adobe Fonts in many applications prior to change of drivers. But after this change the looks of the same fonts became quite different, the length & breadth of "individual letters" changed quite a lot making them look not so beautiful as they were earlier. Am I missing something or is it a normal phenomenon. But I am satisfied with the present looks.
Ok, so I have Linux Mint 7 "Gloria", using kernel 2.6.28-11.
I got a new GeForce 8400GS and replaced my ATi pile of sh*t with it
no problem, Mint starts up fine as if nothing happened. code...
Everything seems fine, so I reboot and all seems fine, except when
I try to play music or a video I get no sound at all. I'm fairly
certain that something in the first links instructions (the Ubuntu ones)
removed something it shouldn't have, but I have no idea what to look
for.
I made the mistake of trying to install an nvidia graphics driver from the download.nvidia.com/opensuse11.2 repository. My card is a PCI quadro nvs 295 so looks like it should be supported. The installation and update of the kernel seemed to be successful, but for some reason sax2 doesn't seem to recognise the nvidia card, even when I run "sax2 -r -m 0=nvidia" and I'm stuck with the VESA framebuffer graphics default in /etc/X11/xorg.conf code...
I've found tons of threads on this kind of thing but I only seem to be making things worse trying to fix it. If anyone can give me a hint and fix my pathetic-looking desktop I'd be very grateful!!! At the moment nothing that uses opengl will work either
When the desktop effects are turned on by default, my desktop is rendered upside down, although the task bar stays at the bottom, even though the favorites bar got cropped off by the panel. Here, I'll demonstrate:Desktop is now rendered properly without desktop effects enabled, as a workaround. Removing .kde or renaming .kde to .kdebackup will not fix the problem. Same as for .config.
Code:
grayson@HTPC:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
[code]....
I run opensuse 11.3/kde desktop.
- updated to KDE:Factory
- X11 repository (V1.9.3)
- proprietary nvidia drivers (260.19.36)
Video card is a Quadro NVS 290. A dual head configuration using twinview is run.
The desktop becomes slow almost immediately (couple of seconds) after logging in (all applications). Turning off desktop effects does not make a difference as well as trying the various recipes on the internet regarding x.org conf-files.
The only action restoring responsiveness is to simply start nvidia-settings. Putting the following pseudo-action into a script-file and mapping it to a key allows to have a workable environment:
nvidia-settings -a PixmapCache=0 && nvidia-settings -a PixmapCache=1
It is very annoying having to press a key every minute or so. Instead of creating a cronjob I would like to solve this issue. This behavior has been consistent across kde/x-org/nvidia/kernel updates for many month now.
Is there anybody out there with an nVidia GeForce 2 MX 400 in Ubuntu Lucid Lynx? I've got one and once I'installed the recommended drivers (rev. 96) from Jockey (reboot, also) the system hans after a few seconds I get into the desktop
View 2 Replies View RelatedI have a video edited in Pitivi. The source files were recorded from a VHS tape, so it's NTSC size (720x480).
Problem is that when I render it the output looks stretched vertically. When I play it in Totem Movie Player, the aspect ratio option can be changed from "Auto" to "4:3 TV" and then it looks correct.
How can I render the output file with a different aspect ratio?
I tried going into Project Settings and adjusting the Video Output height and width, but this doesn't change the aspect ratio. Also tried PAL and VGA instead of NTSC. What should I try next?
Using the version of Pitivi that comes with a fresh install of 10.04 LTS.
Using Openshot, flowblade, or Kdenlive, when video gets rendered into mp4, it comes out at increased speed, both audio and video (seems like double speed but could be a different ratio)
When I play the exported mp4 with VLC for example, it shows the proper video length, not shortened. The video plays at high speed and for the second half of the video it just shows the last frame of the video until it runs out of time.
I have used Openshot extensively and have never had this problem, so I installed all the other video editors I could, and the problem persists (pitivi has a dependency problem so I haven't been able to use it).
I have tried several video players as well, all doing the same (VLC and Smplayer)
I am running Debian stable jessie, 64 bit, xfce
Code: Select allcpu:
AMD A6-3670 APU with Radeon(tm) HD Graphics, 800 MHz
AMD A6-3670 APU with Radeon(tm) HD Graphics, 800 MHz
AMD A6-3670 APU with Radeon(tm) HD Graphics, 800 MHz
AMD A6-3670 APU with Radeon(tm) HD Graphics, 800 MHz
[Code] .....
I create pdf files, from postscript files created by windows printer drivers:
/usr/local/bin/ps2pdfwr "$PSFILE" "$PDFFILE"
All the pdf files created this way seem to be empty, i.e. no text is rendered by Adobe Reader on the display, if the original document only contains TimesNewRoman font. However, if the document also contains any other font (e.g. Arial), then the whole document will be converted correctly, including TimesNewRoman, and also the other font(s).
In both cases, the following font is in the pdf:
Type: Type 1
Encoding: Custom
Actual Font: TimesNewRomanPSMT
Actual Font Type: True Type
For the time being, I have not found a way to create pdfs that are correct in all respect by ghostscript.
Do you think if I do an upgrade from 9.1 to 10.04 and then add i915.modeset=0 ( works with the live CD) to the boot sequence and then load the proprietary NVidia drivers from sys/admin/hardware drivers, that I'll get full screen resolution.
BTW if I don't use the modeset=0 I get a blank screen after update reboot.
I've been using an NVIDIA driver from NVIDIA's site (190.53) for a while. Now I want to upgrade to Lucid.
1) Is it recommended to uninstall this driver prior to upgrading to Lucid?
2) If yes, how do I go about this? Please be specific, since I don't want to presume anything and make a mistake.
I'm doing an install for a friend, the machine is a Gateway with AMD Turion64. The install required the 64 bit version of Lucid 10.04 RC. When I try to install the NVIDIA hardware driver, upon reboot, it flickers, fails, and tells me to use low-setting graphics mode.
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2)
I have tried all 3 options in the Hardware Drivers menu with no success.
Plenty of people seem to be having issues with the nvidia graphics drivers, so I thought I'd add my woes to the heap. My issue is that I run two screens under twinview, but the second one doesn't work for some reason. More specifically, the Nvidia-settings tool is able to detect my second monitor, and I'm able to assign it a resolution and position and the like, and my desktop seems to extend over to where the second monitor is, but the monitor just remains in standby mode.
This happened with the drivers proprietary drivers that Nvidia tried to install (version 173 I believe) so I removed them and tried to install the 195 drivers manually, which I eventually figured out how to do (by blacklisting the nouveau module amongst other things). This still didn't fix things, and gave me the same issue.
(As an aside, where can I find the nvidia-glx-195 and nvidia-modaliases-195 packages, as they seem to have disappeared from the LP-PPA-nvidia-vdpau repository where they apparently used to be?)
The strange part though, is that my second screen works fine if I don't install any nvidia drivers, and just use the System->Preferences->Monitors applet. The second screen comes out of standby and works nicely.
One other little thing I've noticed that may have something to do with it, is that if I switch the outputs that the monitors are connected to, the other monitor will work. The output whose monitor doesn't work is always the one that has the DVI->VGA converter. Could this have something to do with it?
I notice that the NVIDIA GPU on my Dell XPS M1330 gets much hotter under Lucid than with Karmic (or Windows).While the temperature monitor in the "nvidia x server settings" showed between 50 - 60 degrees under Karmic I get readings above 70 degrees with Lucid and the fan is permanently on. I have no GPU intensive applications running.
View 7 Replies View RelatedI dont know if this issue has already been solved, or if there are other threads dealing with it, but Im quite desperate with this bug that has been annoying me since I upgraded from 9.10 to 10.04.
Firs I thought it would be GEM related, but Im using a proprietary graphics card, so thats not the way to solve it. I experience the problems a memory leak provokes, mainly that, as time goes by with the laptop turned on, the system needs more resources to execute simple actions, and it freezes too many times. Plus IBUS will, suddenly, stop working (I still don't know if it is related or not), and, most of the times I log in, Notification Area 2.30.0 will load with errors.
OK, I'm using Ubuntu 10.04 and since upgrading to the 256.35 drivers from the ubuntu-x-swat/x-updates ppa the ambiance and radiance themes have gone funny. For example the scroll bars and buttons are now very white and when hovering over the time it goes a very bright colour. If I return to the 195 drivers the problem goes, but the 256 drivers have better video vdpau performance. The problem occurs regardless of whether compiz is enabled. The login screen is also affected. My gfx card is an 8600m gs.
View 9 Replies View RelatedI've been running Lucid since it dropped. Decided to upgrade my NVIDIA 6600gt graphics card to the newest driver I found at the website. Installation went flawless. But after reboot, I got this:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) May 05 12:24:17 NVIDIA(0): Failed to initialize the NVIDIA
kernel module. Please see the
(EE) May 05 12:24:17 NVIDiA(0): system's kernel log for
[Code]....
I want to use my video card, but after upgrade i got this message:
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
will be apreciaTED, after running from terminal I got this
CODE:
rey@rey-desktop:~$ sudo nvidia-xconfig
[sudo] password for rey:
Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
Lucid installed without any errors that I can see of off the main i386 installation CD, but after booting I get no display. Even in recovery mode. The monitor doesn't go into sleep mode and I can tell that the OS is actually running the background because I can do a Ctrl-Alt-Del and do a proper shutdown. I'm running an nvidia GT 9500. Everything is working fine on Karmic.
View 4 Replies View RelatedHad mythbuntu/xbmc running for 4 months with vdpau and all the same hardware. I killed it with an update and thought it'd all be easier To build it the 2nd time -- wrong! Fresh install of mythbuntu lucid off cd, Asus p5g43t-m pro, nvidia gforce 9500 gt
What I tried so far...Different drivers with the hardware app thingee. Multiple times -- Purge nvidia, purge nouveau, blacklist list of other video stuff with extra line after, stop gnome, manual install various drivers - 195.xxxxx or Synaptic install various drivers. Tried updates, adding avenard and daily build repos. Everything in combinations. Outcome remains consistant. Lo res error start, can't load nvidia driver, selected but not in use, xorg.conf needs editing.
I'm getting the same error messages as the common nvidia help posts describe but the solutions aren't working for me.
4 days of this, 3 installs plus a shot at Mint, and no progress. I'm pretty frustrated. I'd consider returning to karmic if I didn't think the updates would pork the nvidia driver all over again.
Last install of 9.10 there was a required edit of vmalloc=256M and a shut off of cx18. That's been fixed in lucid? What else ccould it be?
i just installed nvidia driver 96 manually and after reboot pc wont boot, nothing no output , no beep even if removing ram but fans still work and lights too, did a cmos reset but still got the same result,
View 1 Replies View RelatedI just finished installing a bunch of truetype fonts. After installing them, firefox is displaying "bradybunch" font when I search google.
The font settings are all serif and sans serif in both the system fonts settings and firefox settings.
I am using ubuntu 9.10.
Any idea why this could be happening?