Ubuntu :: Grub2 Failure After Attempting Dual Boot
May 22, 2011
Today I attempted to install Win 7 on my Ubuntu 11.04 machine so I could dual boot. The Win 7b install went smoothly, but when I tried to fix grub everything went to hell.
I initially tried to reinstall grub using this walk though [URL] However, when I start the computer I get:
"GNU GRUB version 1.99~rc1-13ubuntu3
Minimal BASH-like line editing is supported....
grub> "
I tried to use the technique in [URL] to solve the problems, but when I try to run chroot I get a bin/bash error (I don't have the full error handy, but can rerun the steps if needed). The only potential cause that I can find doesn't apply to me since I am using a 11.04 64 bit live usb on a 11.04 64 bit install.
I've run [URL] and included the results below.
[Code]....
View 9 Replies
ADVERTISEMENT
Jan 1, 2011
I've just gone and modified the MBR by following this article: [url]
What now happens is that I boot up the machine and all that comes up is an error:
The disk drive for /home is not ready yet or not present Continue to wait; or Press S to skip mounting or M for manual recovery
I have /home on a separate partition. Using the manual recovery I can see that the partition still exists and has all the files.
What do I need to do in order to get /home mounting again? Is this even the issue?
View 9 Replies
View Related
Jul 27, 2010
Current rig:
Toshiba Satellite L455 laptop
Celeron 2.20 GHz
Windows 7, 64bit
3GB RAM
I downloaded the DVD release of Kubuntu 10.04, from Kubuntu.org. The file is: Kubuntu-10.04-dvd-amd64.rar . I burned it to a DVD, as image, with ImgBurn application. See any problems so far? I want to dual-boot, leaving my Win7 in tact. I am confident that I can handle this with some patient instruction.
View 14 Replies
View Related
Jan 2, 2011
I'm running 10.04 on Wubi in XP and want to partition to dual boot properly. I've done the permanent grub-update issue fix for Wubi so I've got the time to figure this out, I'm just at an impasse right now.
I've tried both GParted and PartitionMagic Live CDs and have been unable to shrink my main partition down. It's currently at 45 or so GB with about 22 GB empty. I've turned off my virtual memory in XP as well and no dice. I keep getting the error in GParted during the shrinking process. It doesn't really explain why, though.
View 9 Replies
View Related
Feb 10, 2010
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
View 2 Replies
View Related
Feb 15, 2010
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
View 2 Replies
View Related
Jun 8, 2010
I've already had WinXP SP3 installed on one HDD, so i've installed 10.04 on my spare HDD. When I try to boot to Win, I get ntoskrnl.exe missing error. This is my boot info script report:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
[code]....
I've tried with different boot orders in bios, reinstalling Grub2 (several times ), I've even tried to install lilo through software center but didn't know how to configure it ...
View 9 Replies
View Related
May 24, 2010
I'm running a dual-boot with linux mint and Windows. I have an E-machines desktop with :760 GB Hard Drive6GB RAMNVidia GeForce Graphics card 6150se IntegratedAMD Athalon II X2 235e dual-core processorMy problem is getting my grub to boot into Linux Mint, and the problem may lie with my graphics card. Whenever I install the linux mint for the first time, I am prompted to activate my proprietary NVidia graphics driver, which I do. Then I am asked to reboot. Upon reboot, the system gets to the grub menu, accepts my selection to boot linux mint, then the "progress dots" appear on the screen. After about 8 seconds, the screen switches into command prompt mode. I never get to the graphical sign-on screen. All I get is the console sign-on prompts.
From there my only option seems to be to reboot. (sudu reboot). After which, of course, I am forced to go into Windows vs. Linux to avoid the problem. Once Windows has loaded up, I do a restart and go back into Linux Mint . Finally, I get to the Linux sign-on graphical screen.To summarize, i cannot restart linux mint without getting stuck staring at a console screen. I can get back into linux mint if i use the command 'sudo reboot', and, from the grub menu, choosing to go into Windows. From Windows, I then do a restart and end up back at the grub screen again, but this time when I select linux mint, things work and I am given the sign-on gui.If I choose to not install the graphics driver (and put up with the annoying reminder to activate one), the system dual boots without a problem.
View 2 Replies
View Related
May 12, 2010
I recently installed Ubuntu 10.04 on my dual boot system and noticed that my boot options were changed. I typically have Windows XP as the default OS. Here are the steps that worked for me to get Windows XP as the default boot using Grub2.During my initial Window XP install I had partitioned my hard drive into 3 partitions:
Code:
Partition 1: NTFS format (Windows XP installation) in Linux it is called /dev/sda1
Partition 2: NTFS format (Data for Windows XP) in Linux is is called /dev/sda5
[code]....
View 6 Replies
View Related
Nov 23, 2010
Been using Linux for many many years but Grub2 is annoying the heck out of me at the moment.
My home desktop PC is set up as follows:
/dev/sda � 40GB 10k Raptor with Ubuntu 10.10 installed
/dev/sdb � 500GB HDD formatted to ext4
/dev/sdc � 500GB HDD split up as follows:
/dev/sdc1 � 80gb NTFS partition with Win7 installed
/dev/sdc1 � Remaining drive space NTFS but nothing on it yet
Grub2 refuses to detect that Windows is installed on the 3rd HDD. I've googled and spent hours trying all sorts of things to get it to detect it and add it to my boot menu.
If I disconnect all drives except the Windows drive it boots up straight into Win7, so it's healthy and happy. (as healthy and happy as Windows can be, I need it for work purposes only!)
Does anyone have any tips on what would be the best method to force grub to realise that Windows is sitting there?
As far as I understand, the Win7 partition should be (hd2,1) � does that sound right to you?
I haven't tried booting off an Ubuntu CD and re-installing grub, since I can get into Linux and all the guides seem to be about how to restore grub after a Windows install eats it...
View 5 Replies
View Related
Feb 17, 2011
I have read that installing ubuntu 10.10 will inevitably install grub2 with it(unless you use flash drive workaround). i am wondering how slackware 13.1 reacts to grub2.
Does it go on like nothings changed (if configured correctly)? Or does it freak out and have a fit? If slackware doesn't play nice with grub2. i don't think i will use ubuntu 10.10.
View 13 Replies
View Related
Nov 26, 2010
I'm thinking of dual-booting Ubuntu 10.10 and Arch Linux. It seems that I'll have to do some editing of the grub.cfg file, but I have seen numerous warnings not to do so. After a bit of poking around, I've heard about a script that does the editing for you built in to Linux (or maybe just Ubuntu).
My questions are:
- If the aforementioned script does exist, how do I use it?
- else if it doesn't exist, how do I not directly edit grub.cfg?
View 1 Replies
View Related
Aug 21, 2011
I downloaded Fedora 15 Live and Fedora 14 Live to try to see where Linux is for music and broadcast audio on a laptop. It turns out I have to use 14. 14 and 15 both sort of work as live out of the box, although why they ship with the common Broadcom wifi driver missing and the touchpad tap disabled beats me. I also never found the magic button to close down 15. There must be one, but blow me I couldn't find it. Then I tried to follow the instructions at [URL] which mostly seemed to work. I need to keep Win 7 as this is the 32-bit test machine. I used EasyBCD v2.1 rather than the older version the guide is written for.
Booting into Win7 at first worked, then a boot into Linux stopped at a line that said something about a kernel thread helper Then Win 7 blue screened on boot, although it would boot to Safe Mode. Removed Veriface from the Lenovo laptop and it would boot Win 7. Tried setting Drive in EasyBCD to "Boot" rather than "C:" for Fedora. Now booting Fedora gave a Windows missing file message and croaked. Repairing startup with the Win 7 boot CD cured Win 7. Repeated the loop with the same failures. Re-partitioned and re-installed Fedora and just the same - a screen of text that stops. I can now boot to Windows and need help to sort out the Linux boot. How do I start to investigate the screen of text saying things like "__bad_area_nosemaphore" ?
View 5 Replies
View Related
Dec 24, 2010
I have a win7/10.10 dual-boot set up, more or less following the lifehacker.com tutorial (I know, I know). I had to reinstall windows, and its taken over the MBR so that only win7 boots now. My shared drive and the ubuntu filesystem are still there, I just can't get to them without a boot cd. So, I tried to follow the tutorials, which all basically say to reinstall grub or grub2. I tried one method, but ubuntu told me that installing grub2 anywhere but the MBR was a bad idea
View 8 Replies
View Related
Apr 26, 2010
I've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
View 9 Replies
View Related
May 7, 2010
I have a Dell Studio 14 laptop with Windows 7 64bit preinstalled. The processor is core i5 and the machine has 4GB RAM. I freed 25GB of memory from my Hard disk and tried to install Ubuntu 10.04 (AMD). Everything went fine. I restarted and Logged into Ubuntu. It worked like a charm. Then I restarted to Windows7. This also worked well as expected.
But, when I rebooted again, I got a black screen saying that �No modules found. Press any key to restart�
When I press a key, it says �No operating system found�, probably after checking through a network (it printed lines starting with PXE).
I tried exactly in the same way with Ubuntu 8.04 in my machine, and this worked without any problem. The Bootloader was not corrupted after restarting from Windows. I noticed the problem with Ubuntu 9.10 and 10.04. I feel like a problem regarding the bootloader version. AFAIK, 9.10 and 10.04 is using GRUB2 when 8.04 use the old version of GRUB. Will I have to switch to the legacy GRUB? (I would love to keep using GRUB2). If yes, I would like to know How.
View 9 Replies
View Related
May 11, 2010
I have a Dell ZINO HD and dual booted fine prior to 10.04. Grubs seems to not identify the Win7 OS partition correctly. According to Disk utility DEV/SDA1 is a DELL utility partition, DEV/SDA2 is the RECOVERY partition, DEV/SDA3 is my Win7 OS partition...and DEV/SDA5 is my Linux partition. Ubuntu boots fine... but with GRUB using SDA2 (HD0,2) for win7 I cannot boot to it... is there a fix?
The following is in my GRUB.CFG file
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda2)" {
[code]....
View 9 Replies
View Related
May 8, 2011
i had a dual boot with xp and lucid lynx, then upgraded the xp to win7. windows commonly overwrites grub with it's bootloader. and so it did. now i can't access my lucid OS. i need to get grub back (i need to get lucid back).
here's my fdisk:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 5 Replies
View Related
Jul 20, 2011
Dual boot PC, boot disk and WIN XP are on good disk, Ubuntu was installed on failed disk. (I prefer separate disks for each OS).
I know I will need to reinstall Ubuntu later, and of course, GRUB2 now crashes without the Ubuntu disk.
Confirm that the only thing I need to do when I get the new drive installed and partitioned is to boot my XP disk in Recovery Mode and type "fixmbr", (then reboot to confirm clean WIN operation on the existing disk) then install Ubuntu as normal on the new disk.
View 1 Replies
View Related
May 24, 2010
I'm running a dual-boot with linux mint and Windows. I have an E-machines desktop with : 760 GB Hard Drive 6GB RAM NVidia GeForce Graphics card 6150se Integrated AMD Athalon II X2 235e dual-core processor My problem is getting my grub to boot into Linux Mint, and the problem may lie with my graphics card. Whenever I install the linux mint for the first time, I am prompted to activate my proprietary NVidia graphics driver, which I do. Then I am asked to reboot.
Upon reboot, the system gets to the grub menu, accepts my selection to boot linux mint, then the "progress dots" appear on the screen. After about 8 seconds, the screen switches into command prompt mode. I never get to the graphical sign-on screen. All I get is the console sign-on prompts. From there my only option seems to be to reboot. (sudu reboot). After which, of course, I am forced to go into Windows vs. Linux to avoid the problem. Once Windows has loaded up, I do a restart and go back into Linux Mint . Finally, I get to the Linux sign-on graphical screen.
To summarize, i cannot restart linux mint without getting stuck staring at a console screen. I can get back into linux mint if i use the command 'sudo reboot', and, from the grub menu, choosing to go into Windows. From Windows, I then do a restart and end up back at the grub screen again, but this time when I select linux mint, things work and I am given the sign-on gui.
If I choose to not install the graphics driver (and put up with the annoying reminder to activate one), the system dual boots without a problem.
View 5 Replies
View Related
Mar 1, 2010
I'm using opensuse 11.2 and a week or so ago it suddenly stopped shutting down the computer, or rebooting. It shuts the screen down and that seems to be it, so I have ti switch it off. However a day or so later it began to reboot when asked, but still won't shut down. I'm dual booting it with Unbuntu 9.04 using grub2, but it's been that way for many months without problems.
View 9 Replies
View Related
Nov 3, 2009
Problems with dual boot, grub2 auto os prober
Drive #1 (sda) Master CS Ubuntu 9.04 grub upgraded to grub2 version 1.96
Drive #2 (sdb) Slave CS Ubuntu 9.10 grub2 version 1.97 /boot is (sdb1) root is (sdb5)
grub2 is installed in /boot (sdb1) and the mbr of (sdb)
I want to be able to boot drive #2 from drive #1 grub menu at boot time. I have run �update-grub and it probes and finds (sdb5) and creates a new grub.cfg called grub.cfg.new in the /boot folder, but the new cfg file does not show (sdb5) or (sdb) it shows all other changes that I made such as splash screens and they are working. How do I get it to recognize drive #2 with Ubuntu 9.10. I can boot each drive independently of one another and I can boot 9.04 with 9.10 if I swap the drives around. And run update-grub The auto probe is working in the Ubuntu 9.10 and may be working partly in the 9.04.
This may or may not be a problem, but is a pain anyway. When I run update-grub in 9.04's grub version 1.96, it does not change anything in the current grub.cfg it does make a new file called grub.cfg.new I have to go into /boot/grub and change grub.cfg to old and change grub.cfg.new to grub.cfg I do not have this problem running the same command in Ubuntu 9.10's grub. It finds changes and os's and automatically updates the current grub.cfg
View 2 Replies
View Related
Oct 1, 2010
I have two hard disks sda and sdb. I have Windows XP installed on sda2 and Ubuntu 10.04 on sdb5. When I installed Windows XP, Ubuntu stopped booting. I tried to repair grub2 from a Live CD unsuccessfully. Now I have completely messed up my MBR of both HDDs. I just want to configure grub2 to load both OSes in dual boot mode.
View 9 Replies
View Related
Jul 11, 2011
I installed Fedora 15, which was my first real departure from Debian based Linux OSs. I absolutely love the new Gnome 3, and was able to configure F15 to work as I wanted it to. On rebooting I realized that there was no boot loader screen, that F15 just booted and didn't give me a choice as to which OS I wanted to use. Eventually I was able to configure grub to let me see the boot loader and added my old boot loader as a choice. This worked well, maybe not a perfect solution, but it worked. This weekend I installed LMDE (Linux Mint Debian Edition) to another HDD. LMDE uses grub2 and after the install F15 was not recognized.
Two questions: Is there a way for grub2 to see F15? or Can F15 be installed using grub2? I really don't mind re-installing from scratch.
View 10 Replies
View Related
Feb 4, 2010
After having tested Ubuttu 9.10 on a VM with Win XP Pro as host and running both Ubuntu 9.10 and 8.04 from a CD/CDR drive I decided to do an installation of 8.04 on a separate HD and import files.Installation seemed to work OK, but on reboot: no menu was shown to choose OS and the machine booted directly into Windows.Tried to boot directly from the "Ubuntu" HD in the BIOS boot menu and get the message "MBR error" full stop literally.The Ubuntu hard drive is no longer recognised in Windows , can't be acessed from the DOS prompt and obviously cannot be reformatted from there.Just for the record, I'm not totally excluding operator error from the cause
View 9 Replies
View Related
Mar 7, 2010
i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
View 3 Replies
View Related
May 17, 2010
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies
View Related
May 21, 2011
I moved from 8.04.2 to 10.04.2 and tried to upgrade from GRUB Legacy to Grub2. I must have made a mis-step somewhere in the process as on boot it now tells me
Code:
GRUB Loading stage1.5.
GRUB Loading,
Error 15
_
Is there a nuke from orbit, no finesse way of just ripping all the existing GRUB mess out and installing GRUB2 from Boot disk? for instance should I be just be able to boot with a LIVE CD mount the primary disk of this machine and enter the below in a terminal without messing up any further?
Code:
sudo grub-install --root-directory=/media/PRIMARY_DISK /dev/sda
View 3 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
View 9 Replies
View Related
Dec 29, 2010
I have Ubuntu 9.10. The batter drained several days ago, and now when I attempt to boot I simply get a string of indecipherable error messages which last for about 5 minutes, and the screen then goes completely black. I am not able to even get to the login screen. Windows 7 Starter boots fine, so it's definitely a software issue. Any solutions short of completely reinstalling? I really don't want to lose all of my data.
View 2 Replies
View Related
