I'm running a dual-boot with linux mint and Windows. I have an E-machines desktop with :760 GB Hard Drive6GB RAMNVidia GeForce Graphics card 6150se IntegratedAMD Athalon II X2 235e dual-core processorMy problem is getting my grub to boot into Linux Mint, and the problem may lie with my graphics card. Whenever I install the linux mint for the first time, I am prompted to activate my proprietary NVidia graphics driver, which I do. Then I am asked to reboot. Upon reboot, the system gets to the grub menu, accepts my selection to boot linux mint, then the "progress dots" appear on the screen. After about 8 seconds, the screen switches into command prompt mode. I never get to the graphical sign-on screen. All I get is the console sign-on prompts.
From there my only option seems to be to reboot. (sudu reboot). After which, of course, I am forced to go into Windows vs. Linux to avoid the problem. Once Windows has loaded up, I do a restart and go back into Linux Mint . Finally, I get to the Linux sign-on graphical screen.To summarize, i cannot restart linux mint without getting stuck staring at a console screen. I can get back into linux mint if i use the command 'sudo reboot', and, from the grub menu, choosing to go into Windows. From Windows, I then do a restart and end up back at the grub screen again, but this time when I select linux mint, things work and I am given the sign-on gui.If I choose to not install the graphics driver (and put up with the annoying reminder to activate one), the system dual boots without a problem.
I'm running a dual-boot with linux mint and Windows. I have an E-machines desktop with : 760 GB Hard Drive 6GB RAM NVidia GeForce Graphics card 6150se Integrated AMD Athalon II X2 235e dual-core processor My problem is getting my grub to boot into Linux Mint, and the problem may lie with my graphics card. Whenever I install the linux mint for the first time, I am prompted to activate my proprietary NVidia graphics driver, which I do. Then I am asked to reboot.
Upon reboot, the system gets to the grub menu, accepts my selection to boot linux mint, then the "progress dots" appear on the screen. After about 8 seconds, the screen switches into command prompt mode. I never get to the graphical sign-on screen. All I get is the console sign-on prompts. From there my only option seems to be to reboot. (sudu reboot). After which, of course, I am forced to go into Windows vs. Linux to avoid the problem. Once Windows has loaded up, I do a restart and go back into Linux Mint . Finally, I get to the Linux sign-on graphical screen.
To summarize, i cannot restart linux mint without getting stuck staring at a console screen. I can get back into linux mint if i use the command 'sudo reboot', and, from the grub menu, choosing to go into Windows. From Windows, I then do a restart and end up back at the grub screen again, but this time when I select linux mint, things work and I am given the sign-on gui.
If I choose to not install the graphics driver (and put up with the annoying reminder to activate one), the system dual boots without a problem.
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
I have Windows XP SP3 running on my Desktop PC and wish to dual boot it with Ubuntu 10.10. This isn't the issue as I can do this and it gives me the GRUB menu but selecting Windows XP won't do anything - or so it seems How long should it take to boot into Windows from the GRUB menu?
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst Here is what i have
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
Today I attempted to install Win 7 on my Ubuntu 11.04 machine so I could dual boot. The Win 7b install went smoothly, but when I tried to fix grub everything went to hell.
I initially tried to reinstall grub using this walk though [URL] However, when I start the computer I get:
"GNU GRUB version 1.99~rc1-13ubuntu3
Minimal BASH-like line editing is supported....
grub> "
I tried to use the technique in [URL] to solve the problems, but when I try to run chroot I get a bin/bash error (I don't have the full error handy, but can rerun the steps if needed). The only potential cause that I can find doesn't apply to me since I am using a 11.04 64 bit live usb on a 11.04 64 bit install.
I downloaded Fedora 15 Live and Fedora 14 Live to try to see where Linux is for music and broadcast audio on a laptop. It turns out I have to use 14. 14 and 15 both sort of work as live out of the box, although why they ship with the common Broadcom wifi driver missing and the touchpad tap disabled beats me. I also never found the magic button to close down 15. There must be one, but blow me I couldn't find it. Then I tried to follow the instructions at [URL] which mostly seemed to work. I need to keep Win 7 as this is the 32-bit test machine. I used EasyBCD v2.1 rather than the older version the guide is written for.
Booting into Win7 at first worked, then a boot into Linux stopped at a line that said something about a kernel thread helper Then Win 7 blue screened on boot, although it would boot to Safe Mode. Removed Veriface from the Lenovo laptop and it would boot Win 7. Tried setting Drive in EasyBCD to "Boot" rather than "C:" for Fedora. Now booting Fedora gave a Windows missing file message and croaked. Repairing startup with the Win 7 boot CD cured Win 7. Repeated the loop with the same failures. Re-partitioned and re-installed Fedora and just the same - a screen of text that stops. I can now boot to Windows and need help to sort out the Linux boot. How do I start to investigate the screen of text saying things like "__bad_area_nosemaphore" ?
i could not change the sequence of dual booting from the grub menu.lst, due to it shows a blank screen when i put the command in the terminalayan@jayan-desktop:~$ sudo gedit /boot/grub/menu.lst [sudo] password for jayan:
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
I have a triple boot system running Ubuntu, WinXP, and Win7.I had Ubuntu running fine on its own partition (sda1) but an upgrade from Karmic to Lucid turned it into a dog.So I tar-ed my /home filesystem, split sda1 into 2 new extended partitions, then did a clean install of Lucid with / on sda5, and /home on sda6.I should also mention that I have already tried re-installing Grub from a live USB to no avail.
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
i have lucid lnyx installed as my main system and added natty on a seperate drive. after installing, the new grub detected lynx & i was able to boot into each without any problem. after doing some tweaking on natty (changed run level), it didn't boot properly so i reverted to the old config via rescue disk. after rebooting, the old grub menu didn't show & it loaded lynx automatically.
i tried the suggestion from another post changed the hidden menu and updated grub but it didn't detect natty (below).
------ update-grub ------ Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-31-generic Found initrd image: /boot/initrd.img-2.6.32-31-generic Found linux image: /boot/vmlinuz-2.6.32-30-generic
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
So my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?
I've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code: grub root (hd0,3) setup (hd0) quit reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code: Device Boot Start End Blocks Id System /dev/sda1 1 262 2104483+ 82 Linux swap / Solaris /dev/sda2 263 13316 104856255 83 Linux /dev/sda3 * 13317 14621 10482412+ 83 Linux
I'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:
Ubuntu Installer Main Menu
Choose the next step in the install process:
choose language configure the keyboard detect and mount CD-rom etc...
choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.
I am trying to streamline my boot screen/GRUB Menu. I know what I want it to look like (grub_wanted.jpg), and I think I know how to get it by uninstalling a couple of things, (synaptic.jpg). Now I have too many items on the screen, and it looks cluttered to me (grub.jpg).
I'm a noob but enjoying dual booting. However, every time I run update manager I get a new vmlinuz entry and now I have multiple boot options in my grub boot menu. Now when I have like 5 ubuntu entries to move past to select Windows. and the latest Ubuntu is always at the bottom so I have to annoyingly scroll down to select the latest there. I don't really understand what the vmlinuzXXX entries in the boot folder are for so I don't want to delete them. I've thought about editing the loop in the 10_linux file in the grub.d folder but it looks like its calling a function or macro or something:
Code: linux='version_find_latest $list'
But like I said, I'm a noob to all this (a .Net developer on Windows professionally) and don't understand where this is. It looks like this function call has the logic I need to fix. Because its not finding the latest, its just finding all. How to I get back to one Ubunutu boot option like when I first installed?
I installed Windows, then Ubuntu, but I don't know how to set the timer for the Dual-boot menu to start at Windows firstOn my Laptop, Ubuntu is set to run first and it's set to start after 10 secondsBut I wasn't the one who installed Ubuntu on my Laptop, it was someone else...etc. So I don't really know how to do the thingI want to set the Dual-boot so that Windows bee's the first one to start loading, at a timer of 1 minute
I have rebuilt my laptop to a dual boot of Ubuntu 10.10 and Windows 7 - if only iTunes would work under wine I wouldn't even have to worry about Windows, but that is the penalty for using an Apple iPod!
Anyway how do I go about about editing the boot options menu? Following the kernel upgrade in the Ubuntu updates I now have two entries for Ubuntu and would like to just tidy it up.
If it is risky let me know because I have the systems working just nice, and really wouldn't want to trash them just for something cosmetic.
I have dual boot PC with XP and U10.10. Is it possible to set up dual OS boot menu that it is hidden in a way that i can still choose to boot which OS i want from that hidden menu.Or even better, is it possible to set up automatic boot into XP in a way that boot menu isn't shown at all but that I can call boot menu via keystroke (like you call boot menu to go into the safe mode in XP options by pressing F?
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
I have a working RHEL in /dev/sda1 and a newly constructed Ubuntu Lucid in /dev/sda2. I'm going to edit the grub config and reboot the server into the new Ubuntu. However, I'm not 100% sure that the new distro can boot. And since my only way to access the server is via SSH, I need the network to be up too.
How can I configure Grub and Ubuntu so that if the server fails to boot, it will automatically reboot into the old RHEL? Currently using GRUB 0.93, but I can upgrade it if needed.
Update: In the end, no boot failure occured. But without the insurance from this, I wouldn't have attempted [URL]..
