General :: Newbie Dual Boot Grub Menu Failure?
May 24, 2010
I'm running a dual-boot with linux mint and Windows. I have an E-machines desktop with : 760 GB Hard Drive 6GB RAM NVidia GeForce Graphics card 6150se Integrated AMD Athalon II X2 235e dual-core processor My problem is getting my grub to boot into Linux Mint, and the problem may lie with my graphics card. Whenever I install the linux mint for the first time, I am prompted to activate my proprietary NVidia graphics driver, which I do. Then I am asked to reboot.
Upon reboot, the system gets to the grub menu, accepts my selection to boot linux mint, then the "progress dots" appear on the screen. After about 8 seconds, the screen switches into command prompt mode. I never get to the graphical sign-on screen. All I get is the console sign-on prompts. From there my only option seems to be to reboot. (sudu reboot). After which, of course, I am forced to go into Windows vs. Linux to avoid the problem. Once Windows has loaded up, I do a restart and go back into Linux Mint . Finally, I get to the Linux sign-on graphical screen.
To summarize, i cannot restart linux mint without getting stuck staring at a console screen. I can get back into linux mint if i use the command 'sudo reboot', and, from the grub menu, choosing to go into Windows. From Windows, I then do a restart and end up back at the grub screen again, but this time when I select linux mint, things work and I am given the sign-on gui.
If I choose to not install the graphics driver (and put up with the annoying reminder to activate one), the system dual boots without a problem.
View 5 Replies
ADVERTISEMENT
May 24, 2010
I'm running a dual-boot with linux mint and Windows. I have an E-machines desktop with :760 GB Hard Drive6GB RAMNVidia GeForce Graphics card 6150se IntegratedAMD Athalon II X2 235e dual-core processorMy problem is getting my grub to boot into Linux Mint, and the problem may lie with my graphics card. Whenever I install the linux mint for the first time, I am prompted to activate my proprietary NVidia graphics driver, which I do. Then I am asked to reboot. Upon reboot, the system gets to the grub menu, accepts my selection to boot linux mint, then the "progress dots" appear on the screen. After about 8 seconds, the screen switches into command prompt mode. I never get to the graphical sign-on screen. All I get is the console sign-on prompts.
From there my only option seems to be to reboot. (sudu reboot). After which, of course, I am forced to go into Windows vs. Linux to avoid the problem. Once Windows has loaded up, I do a restart and go back into Linux Mint . Finally, I get to the Linux sign-on graphical screen.To summarize, i cannot restart linux mint without getting stuck staring at a console screen. I can get back into linux mint if i use the command 'sudo reboot', and, from the grub menu, choosing to go into Windows. From Windows, I then do a restart and end up back at the grub screen again, but this time when I select linux mint, things work and I am given the sign-on gui.If I choose to not install the graphics driver (and put up with the annoying reminder to activate one), the system dual boots without a problem.
View 2 Replies
View Related
Dec 17, 2009
I recently installed Windows 7 64-bit on my Quad-Core 3GB RAM machine. I am now looking to dual-boot it with Linux Mint 7 64-bit. While I am an IT Service Management major, I really only know enough to be dangerous, and I don't want to ruin the first computer that I have ever bought outright. (Nor do I want to have to reload Windows 7 again.) I also want to be able to run Microsoft Office (I despise OpenOffice, so this is not an option), other programs native to Windows, and iTunes. Anyone know how to do this correctly?
View 1 Replies
View Related
Jan 28, 2011
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
View 5 Replies
View Related
Jul 3, 2011
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
View 8 Replies
View Related
Dec 16, 2010
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
View 7 Replies
View Related
Feb 23, 2011
I have Windows XP SP3 running on my Desktop PC and wish to dual boot it with Ubuntu 10.10. This isn't the issue as I can do this and it gives me the GRUB menu but selecting Windows XP won't do anything - or so it seems How long should it take to boot into Windows from the GRUB menu?
View 9 Replies
View Related
Feb 18, 2010
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst
Here is what i have
Code:
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro quiet
initrd /boot/initrd.img-2.6.26-1-686
code....
View 4 Replies
View Related
Sep 19, 2010
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
View 2 Replies
View Related
Dec 3, 2010
I have a working RHEL in /dev/sda1 and a newly constructed Ubuntu Lucid in /dev/sda2. I'm going to edit the grub config and reboot the server into the new Ubuntu. However, I'm not 100% sure that the new distro can boot. And since my only way to access the server is via SSH, I need the network to be up too.
How can I configure Grub and Ubuntu so that if the server fails to boot, it will automatically reboot into the old RHEL? Currently using GRUB 0.93, but I can upgrade it if needed.
Update: In the end, no boot failure occured. But without the insurance from this, I wouldn't have attempted [URL]..
View 2 Replies
View Related
Mar 7, 2011
I'm currently having a problem trying to remove the black screen that appears at Start-Up that asks me which operating system I want to run...I've already deleted wubi but this screen keeps appearing every time my computer starts up...How do I remove or disable this feature?
View 1 Replies
View Related
Apr 19, 2010
change the boot menu - GRUB
I regularly update my ubuntu (10.04), and new minor versions keep accumulating on the GRUB screen. Right now I have 5 different versions listed on the GRUB, even though I always select the latest version to work with.
Am I supposed to do anything to get rid of the old version references? Do these old versions affect disk space/performance?
View 2 Replies
View Related
Feb 1, 2011
I had debian squeeze already installed, then installed win 7. Windows overwrote by MBR, as I expected it to, so I used an ubuntu live cd to reinstall grub2 to debian root.
I rebooted, and sure enough I had grub back. The boot menu has debian on it. Just debian (crunchbang actually, but its the same thing).
So I added a script in /etc/grub.d (called Windows_11) to create a windows chainloader entry in grub.cfg, and ran update-grub.
Update-grub picks up my /etc/grub.d/Windows_11 script, and adds an appropriate chainloader entry to /boot/grub/grub.cfg.
So I would expect this new chainloader entry to show up in my boot menu when I boot up. But it doesn't; on booting I only have the option to select debian.
Here is my /boot/grub/grub.cfg -
Code:
### BEGIN /etc/grub.d/10_linux ###
menuentry 'CrunchBang Linux, with Linux 2.6.32-5-686' --class crunchbang --class gnu-linux --class gnu --class os {
insmod part_msdos
[Code].....
View 11 Replies
View Related
Nov 29, 2010
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies
View Related
Sep 13, 2009
Here is how I created a Grub2 boot-cd with a (grub.cfg) menu:
mkdir /tmp/cdroot
mkdir /tmp/cdroot/boot
mkdir /tmp/cdroot/boot/grub
cp /boot/grub/grub.cfg /tmp/cdroot/boot/grub
cd /tmp
[code]....
NOTE: The above proceedure assumes you already have a grub.cfg file. If you don't, create one in the /tmp/cdroot/boot/grub directory
View 6 Replies
View Related
Jan 31, 2010
In my Red Hat 7.2 , the /boot/grub/grub.conf has the following data :
But when I reboot my Red Hat server , I don't see the Grub menu to say edit the boot kernel .
View 15 Replies
View Related
Sep 11, 2009
I hav two 40 GB hard disks.RHEL5 is installed on 1st and Windows on 2nd. In order to use each OS I manually hav to go and change the "first boot device" option in BIOS setting and boot into required OS. GRUB doesn't show Windows in its boot menu.How can I make GRUB recognize Windows and boot into both OS using GRUB boot menu?
View 1 Replies
View Related
Nov 29, 2010
In order for me to get started with Linux, I downloaded & installed Virtualbox (V3.2.10) on my WinXP machine, and downloaded the Puppy Linux image from as per[URL].. When I start up the VM, I get a GRUB menu allowing me to boot
Quote:
Linux (on /dev/hda1)
Install GRUB to floppy disk (on /dev/fd0)
Install GRUB to Linux partition (on /dev/hda1)
I tried the first option, which results in Quote:
Booting 'Linux (on /dev/hda1)'
root (hd0, 0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz root=/dev/hda1 ro vga=normal
[Code]...
View 7 Replies
View Related
Jan 30, 2010
I have a problem with my GRUB bootloader. I have Ubuntu 9.10 and Win XP installed on my laptop. But only the list of Ubuntu appears in the menu and NOT win XP.
Some instructions say try to edit the "menu.lst" file in "/boot/grub/" menu.
But there is no such a file in my /boot/grub/" folder.
View 14 Replies
View Related
May 10, 2011
On my PC, I use GRUB to manage my dual-boot startup on my PC. Every time I update my Linux, It adds another 2 startup options on my HD for every distro I have. (The Normal and Recovery modes for the new version.) I would like to add the VortexBox distro someday.
Is there a way for me to get rid of the older versions of Linux distro's on my GRUB menu so I just see the newest? I have 6 options for Ubuntu 10.10 and 4 options for UGE 2.8..
View 3 Replies
View Related
May 7, 2010
I tried making some changes to /boot/grub/menu.lst file by logging in thru su but it throws following error:
[root@localhost avi]# /boot/grub/menu/lst | gedit
(gedit:4874): GnomeUI-WARNING **:
While connecting to session manager:
Authentication Rejected, reason : None of the
authentication protocols specified are supported and host-based authentication failed.
bash: /boot/grub/menu/lst: No such file or directory
View 14 Replies
View Related
Mar 3, 2011
The XP partition ceased to boot (in fact when it seems to start Windows, it re-boots once and again). I can access the XP partition from Ubuntu 9.10
If I boot with the WXP CD and reinstall it in the original NTFS partition, will it wipe the boot menu out, loosing any chance to boot in Linux?
View 8 Replies
View Related
Aug 21, 2011
I downloaded Fedora 15 Live and Fedora 14 Live to try to see where Linux is for music and broadcast audio on a laptop. It turns out I have to use 14. 14 and 15 both sort of work as live out of the box, although why they ship with the common Broadcom wifi driver missing and the touchpad tap disabled beats me. I also never found the magic button to close down 15. There must be one, but blow me I couldn't find it. Then I tried to follow the instructions at [URL] which mostly seemed to work. I need to keep Win 7 as this is the 32-bit test machine. I used EasyBCD v2.1 rather than the older version the guide is written for.
Booting into Win7 at first worked, then a boot into Linux stopped at a line that said something about a kernel thread helper Then Win 7 blue screened on boot, although it would boot to Safe Mode. Removed Veriface from the Lenovo laptop and it would boot Win 7. Tried setting Drive in EasyBCD to "Boot" rather than "C:" for Fedora. Now booting Fedora gave a Windows missing file message and croaked. Repairing startup with the Win 7 boot CD cured Win 7. Repeated the loop with the same failures. Re-partitioned and re-installed Fedora and just the same - a screen of text that stops. I can now boot to Windows and need help to sort out the Linux boot. How do I start to investigate the screen of text saying things like "__bad_area_nosemaphore" ?
View 5 Replies
View Related
May 22, 2011
Today I attempted to install Win 7 on my Ubuntu 11.04 machine so I could dual boot. The Win 7b install went smoothly, but when I tried to fix grub everything went to hell.
I initially tried to reinstall grub using this walk though [URL] However, when I start the computer I get:
"GNU GRUB version 1.99~rc1-13ubuntu3
Minimal BASH-like line editing is supported....
grub> "
I tried to use the technique in [URL] to solve the problems, but when I try to run chroot I get a bin/bash error (I don't have the full error handy, but can rerun the steps if needed). The only potential cause that I can find doesn't apply to me since I am using a 11.04 64 bit live usb on a 11.04 64 bit install.
I've run [URL] and included the results below.
[Code]....
View 9 Replies
View Related
Sep 29, 2010
Ive created two RAID0 partitions on my drives, a 500GB and a 60GB. Im trying to install Ubuntu on the smaller partition (ive already put Win 7 on the larger one) and every time when i get right to the last part of installation it says Grub couldnt be installed. "the grub package failed to install in arget......."
View 1 Replies
View Related
Apr 10, 2010
I want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...
This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial
grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:
mkdir: cannot create directory '/media/hda3/boot': No such file or directory
View 2 Replies
View Related
Aug 9, 2010
Installing upgrade from Open SuSe 10.3 to 11.3. I did it on a 32-bit laptop, aborted half way through and couldn't get back on because GRUB loader was corrupted. No problem as there are lots of 32-bit GRUB loaders available for download, install was successful 2nd time. I need to do the same for a desktop x64bit dual core Intel. Can't find a x64bit GRUB loader on internet - how do I extract from my current set-up an emergency GRUB-loader CD?
View 5 Replies
View Related
Jun 26, 2010
I've run Debian on my laptop for quite some time now with no problems. I installed Slack to a new partition created in the free space of my hard drive, and I thik this was my mistake: I let Slack automatically configure the MBR with lilo (can't remember - I should stop operating on the MBR at 4 AM.) Now Slack runs just fine, but upon bootup I would like to be able to boot either Debian or Slack, but instead I just have a Slack splash and the only option is to press enter to boot Slack.
Code:
I believe sda1 is the root directory of my Debian install.
Code:
In the above table, sda10 is the swap I created for Slack and sda3 is the root directory for Slack. All other partitions were there before (my initial Debian install).
Thus my partitions are apparently intact and visible by the MBR (is it correct that the MBR holds the list of partitions on a disk?) but for some reason I don't have the option to boot Debian at all - just Slack.
I have a feeling this is a LILO/GRUB issue, but I don't know where to start.
EDIT: more poking around seems to reveal that it is the configuration of LILO that is the problem. Observe the following output:
Code:
View 4 Replies
View Related
Aug 12, 2011
I have been an MCSA for the last 20 years, but recently I have been very impressed indeed with Ubuntu 11.04, having dabbled with and then discarded Susi Linux some five years ago. My problem may be summarised as outlined below: Using the downloadable ISO I installed Ubuntu 11.04 as a dual boot on a Win7 100GB HDD on my Lenovo T61 laptop. No problem they both rock and I'm very impressed. During the installation procedure I selected the largest partition sizes available from the Ubuntu installer wizard being 25GB Extended split into 18GB Ext4, and 3.2GB and 3.2 GB swaps (I couldn't suss out any way of manually increasing them any further).
I found that the 11.04 Startup Manager application didn't work at all, so I downloaded and installed Grub Customizer 2.1..and that did work after a fashion.. certainly enough to actually effect changes in the grub configuration settings. Everything worked so well on the 100GB HDD that I decided to transpose the entire disk image to a new 500GB WD Scorpio and make the dual boot my main working disk. Using Acronis I imaged off the 100GB installation selecting the partition by partition, and retain disk signature options. I then recovered the image to the new 500GB HDD and everything works beautifully on the new HDD.
Except of course all the partitions are still the same size. I won't waste your reading time recounting everything that I have done using Acronis Disk Director (V Good) and Gparted (not so good), but needless to say whatever I do Grub won't have it, and I have lost count of the times that I have re-recovered the good image. Basically I want to increase the partion sizes to apportion larger partitions to both Win 7 and 11.04 and obviously I'm missing something somewhere.
Fdisk -l -u produces..
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9f011ed1 .....
View 6 Replies
View Related
Feb 28, 2010
I have a dual boot system with Windows XP and Fedora12. Following is the partition structure of my harddisk.
Disk /dev/sda: 80.1 GB, 80060424192 bytes
255 heads, 63 sectors/track, 9733 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x5e5e5e5e
Device Boot Start End Blocks Id System
/dev/sda1 1 1912 15358108+ 7 HPFS/NTFS
[Code]...
I deleted the "/dev/sda8" through Windows Disk Management, and when i restarted the system. GRUB boot menu vanished and a GRUB console appeared. Then I booted my system using Fedora12 live USB and created a new partition at same place from where i deleted it, and then after restart my started working normally as it was before partition deletion.
But, I don't understand what actually happened. Can anyone tell me in detail what happened and why and what to do to avoid such things in future?
View 1 Replies
View Related
