Ubuntu :: Get "mosaic" Screen When Booting With Disc
Jan 21, 2011
I am currently running Win7 and want to dual boot Ubuntu 10.10 on my computer I am currently running AMD Phenom II X4 940 Processor at 3.0 Ghz, 6gigs of ram, and have a Nvidia GT240.
My issue is that when I boot from the disc I get up to the Ubuntu loading screen and then it shows my background all scrambled and nothing happens, I cant do anything, no windows pop up at all. Is this and issue with my computer or with the disc, or maybe im missing something necessary.
Booting through the disc, which brings me here:[url]
After that screen:[url]
View 4 Replies
ADVERTISEMENT
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Jun 21, 2010
How to create a photo mosaic like the one you see here..
View 6 Replies
View Related
Aug 17, 2010
am running fc10 and windows xp on my laptop.As usual my windows got crashed.When i inserted windows xp cd, the system is not booting from disc properly. It shows inspecting systems hardware and then turns into a blank screen.
View 2 Replies
View Related
May 22, 2010
I want to make a DVD with Ubuntu, Kubuntu, and Xubuntu so i can choose one to start a live session when booting from the disc. I'd like to introduce linux to friends and having a few variations might make it easier to transition.
View 3 Replies
View Related
Jun 21, 2010
I have been here awhile, but have not posted much, and am a bit new to things again...I just burned a 10.04 Ubuntu Desktop Edition disc from the main Ubuntu page. However, when I load up the disc (boot from it), I get a login screen instead of a desktop or window asking for input.What am I doing wrong? I know on the older Live! discs you'd typically get a desktop or installation window.
View 2 Replies
View Related
May 25, 2011
don't have the knowledge to know what to do next.I'm trying to run the live disc of 11.04 as I want to dual boot with it. I've checked the MD5 and checked the disc for faults and they're ok but I just end up with a black screen. The graphics card is ATI 4550.
View 2 Replies
View Related
Feb 11, 2010
i have just tried ubuntu 9.10 runing the "try ubuntu without changing" mode and the screen resolution was totaly off, it was 800 x 600 and there was only one other optinion wich was even worse , my screen res on windows is 1366 x 798.... Is this a problem that would rectify itself if i installed ubuntu properly or is there something i need to do?
View 9 Replies
View Related
Mar 10, 2010
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
View 4 Replies
View Related
Dec 19, 2010
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies
View Related
Jul 21, 2010
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
View 2 Replies
View Related
Nov 8, 2010
I had Ubuntu installed on my old laptop in dualboot with windows. This year i bought a new Sony Vaio VPCS12M9E preinstalled with windows 7 pro, but i liked the idea of having the opportunity of chosing between windows and ubuntu, so i downloaded ubuntu 10.10 and burned the ISO-image to a disc, and restarted my laptop just as i did when i installed it on my old laptop. The problem is that when i boot the disc after restarting the computer, the screen just turns black. What can i do to install Ubuntu?
View 1 Replies
View Related
Feb 26, 2011
I am new to Linux but wanted to try it. I downloaded Ubuntu and burned the ISO to disc, I restarted my PC and the disc runs and seems to be loading, a purple screen appears with a small icon at the bottom, then the screen turns black and that is all, disc stops running and nothing else, am i doing something wrong here?
View 2 Replies
View Related
Nov 3, 2010
I downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
View 1 Replies
View Related
Dec 8, 2010
i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
View 4 Replies
View Related
Jan 1, 2011
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
View 9 Replies
View Related
Dec 6, 2009
I'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies
View Related
Jul 15, 2009
I have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies
View Related
Feb 26, 2010
I have upgrade to the Lucid alphas. Just lately when I turn on the computer it appears to start ok but it will not go to the signon screen. It stops on a blank black screen with a curser top left corner. Pushing keys just seems to give a mixture of letters ,symbols and numbers nothing intelligible, how to fix this concern or at least how to get into safe mode so I can attempt to find the problem.
View 2 Replies
View Related
Nov 22, 2010
I'm new using Ubuntu desktop and I made a mistake while reading a tutorial on shell. I used the bind ctrl + alt + Fx (in this case, F6) and I didn'tnow how to come back to my original desktop after that. So I did a hard reboot . Since, after booting I see the loading screen with Ubuntu writen on a purple background, but after that I get a black screen and I cannot type or do anything.I tried to log in in "safe mode" (or something like that) and it worked but I got a low screen resolution of course and after rebooting in normal mode it still doesn't work.
View 5 Replies
View Related
Jan 11, 2011
I had a problem with my system today when I came home and unlocked the screen and the single program I had left running had crashed and so did AWN, I restarted the system and it just goes to a blank screen just before it got to the login and does nothing. I reinstalled the system and reinstalled the ATI drivers downloaded from the ATI website just like I had previously (had problems with the Ubuntu drivers in the past) and rebooted the system and got the same blank screen... Now I'm on my second system reinstall of the night but haven't installed the ATI drivers yet, but I need them to set up my dual screen gig.
View 5 Replies
View Related
Feb 1, 2011
I just downloaded Ubuntu 10.10 Netbook. Sometimes when i am start my netbook i boot to black screen. I can hear the loading music but the screen is just black. And when i press the powerbutton to close the computer and turn it on again, then sometimes i can see the screen and everything is working. and sometimes it is working just fine.
When i have my usb mouse and usb wireless network thingy it seems to have a hard time booting, but when i unplug my usb mouse and network thingy it boots just nice.
It would be nice if i could turn on the power and then the netbook would just startup and show me a screen, and didnt have to unplug my usb things first...
View 9 Replies
View Related
May 8, 2011
When booting, right after Grub OS selection, Purple screen without ubuntu logo appears for about 3-5 mins without HDD LED flashing. after this 'freeze', same purple screen with logo appears, and it fully loads to ubuntu login screen in about 5 seconds.. is this usual?My spec= 1Ghz CPU, 1GB RAM. Netbook.any idea why and how to fix this?
View 9 Replies
View Related
Aug 17, 2011
I recently installed Ubuntu 11.04 on my laptop. I uninstalled, now I installed again. I used WUBI both times. This time, every time I boot, (after I select Ubuntu in the wubi and grub bootloaders) I get a blank black screen with a flashing _ in the corner. Then I get to the login screen and it works like normal. Are there any solutions for this? I'd sort of prefer to see the ubuntu logo and flashing dots.
View 5 Replies
View Related
Jan 4, 2010
On this Lenovo netbook: I was playing with Firefox, came across a security.ubuntu.com problem, established in general terms what it was referring to and that it might be easier just to reinstall Ubuntu andupgrade to 9.04.Succesfully installed, it said, please to do a restart. But the screen is blank. Now, all I have is a totally dark screen whether booting off the hard drive (it starts running and clicking, then stops clicking; staysrunning 'til I switch off again) or via the external CD drive (which lights up, flashing, for a few moments while clicking, then runs down).
I've tried the Ubuntu CD which originally installed ok, and also the one from which I'd first installed Ubuntu instead of XP.I wondered if I'd inadvertently switched off the screen, but apparentlynot - in any case, presumably it would default to On? I've also looked forsomething on an external screen, I know that works because I played with
it a few weeks ago. fn-F" to toggle the screen doesn't do anything, nor fn-up/down to change brightness. I've just tried ctrl-alt-backspace, with CD and HDD, to no effect.
The battery's fully charged but in any case I'm using the psu and alllights are correctly lit. I've reseated the CD leads several times to besure.I've never networked it to the desktop - it had seemed a good idea to keep them separate so only one gets broken.
View 2 Replies
View Related
Mar 15, 2010
If I choose to boot Ubuntu, the splash screen appears, but right when the login screen should appear, I get nothing. This is how it started: While update manager was installing updates, I hit ALT+F2 to get to the TTY. I did this because ubuntu now refuses to mount any usb devices whatsoever. (for more on that, see this link: [URL] Once I got to TTY3 or whatever, I hit ALT + F7 to get back to the GUI. All I got was a black screen and a mouse. The computer froze and I restarted. All I have now after booting is a black, frozen screen. ALT + any F key to get to TTY doesn't work.
View 2 Replies
View Related
Mar 30, 2010
I've installed Ubuntu 9.10 in my old desktop, i.e. Compaq Evo D510 e-pc:
Intel Pentium 4 1.7Ghz
1GB 400Mhz RAM
80GB HDD
Intel 845G chipset board
Onboard 4X AGP Intel Video chipset
Onboard audio
The above is my setup and Ubuntu runs perfectly fine when it is being cold booted, i.e. I shut it down during the night and boot it in the morning, it boots perfectly fine. But while using, it suddenly freezes and I'm only able to move my mouse pointer and nothing else works on the screen. I tried doing the Ctrl+Alt+(F1/F2/...) but nothing works.
So when I restart it using the power switch, it goes into the black screen and nothing loads up. I'm stuck over here. And if I turn it off for around 30mins by removing the power plug, and then reboot it again, Ubuntu loads without any problem and runs for sometime, then again the same freezing problem happens and I have to wait for another 30mins to boot it up again.
I have a 28" monitor connected to it and it runs at 1920 x 1200 (16:10) resolution at 60Hz.
View 5 Replies
View Related
Nov 8, 2010
I have been trying to install Ubuntu 10.10 64bit on my Windows7 64bit machine. I created the Ubuntu installation on a USB stick and when I run it live from the stick, it works fine. Under Windows7, I created a partition for Ubuntu, and after reboot run the installation off the USB stick. During installation, I pointed the installer to the partition I just created, and told it to use it as "/" (root - this is the part where I think I could have screwed up, but I am not sure). I want to have both Win7 and Ubuntu on that machine. I did not create the SWAP file as I don't think I'd need it (this is a 8Gb RAM 3Ghz i7 machine). The installation goes without any problem, but then I reboot...
When I restart after installation, and any time after that, I get to the grub screen that allows me to pick the system I want - and when I chose Win7, everything's fine. When I want to pick Ubuntu, or Ubuntu in recovery mode, the screen goes black, and after a short while it seems the monitor itself stops receiving any input from the computer, as it goes into standby. There is no error message, no restart of the computer, no message after I select Ubuntu and click enter. Nothing, just total blackness and despair, and a monitor in standby mode.
View 9 Replies
View Related
Jan 11, 2011
I just installed Ubuntu 10.04.1 (desktop edition) on my netbook (NB200), the installation worked fine, but when i restart i get a black screen with a blinking underscore on the top left corner. I don't have any options as any key that i press is just printed on the screen. (This happened with every version that I tried so far, even the netbook remixes).
If I don't press anything for some minutes, Ubuntu is finally starting, but without showing the Ubuntu loading screen in the process, like it did when I tried it with the USB.
View 3 Replies
View Related
Jan 22, 2011
My screen gets all messed up (pixelated) for about a second when starting Maverick10.10. It first started when loading Blender2.56. Can someone explain to me what maybe causing this as I don't even know if it's a graphics card issue or not. I tried searching on the net for people with similar problems but couldn't find anything. Radeon x300 graphics card using the open source drivers.
View 2 Replies
View Related
