Ubuntu :: Black Screen After Booting?

Nov 22, 2010

I'm new using Ubuntu desktop and I made a mistake while reading a tutorial on shell. I used the bind ctrl + alt + Fx (in this case, F6) and I didn'tnow how to come back to my original desktop after that. So I did a hard reboot . Since, after booting I see the loading screen with Ubuntu writen on a purple background, but after that I get a black screen and I cannot type or do anything.I tried to log in in "safe mode" (or something like that) and it worked but I got a low screen resolution of course and after rebooting in normal mode it still doesn't work.

View 5 Replies


ADVERTISEMENT

Red Hat / Fedora :: Not Booting - Getting Black Screen With Copyright Notice Stays At Screen Forever

Nov 3, 2010

I downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.

I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.

View 1 Replies View Related

General :: 10.10 Booting To Terminal - Black Screen Instead Of The Normal Purple Screen

Dec 8, 2010

i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.

View 4 Replies View Related

Ubuntu :: Black Screen When Booting Up?

Feb 26, 2010

I have upgrade to the Lucid alphas. Just lately when I turn on the computer it appears to start ok but it will not go to the signon screen. It stops on a blank black screen with a curser top left corner. Pushing keys just seems to give a mixture of letters ,symbols and numbers nothing intelligible, how to fix this concern or at least how to get into safe mode so I can attempt to find the problem.

View 2 Replies View Related

Ubuntu :: Getting A Black Screen When Booting Sometimes

Feb 1, 2011

I just downloaded Ubuntu 10.10 Netbook. Sometimes when i am start my netbook i boot to black screen. I can hear the loading music but the screen is just black. And when i press the powerbutton to close the computer and turn it on again, then sometimes i can see the screen and everything is working. and sometimes it is working just fine.

When i have my usb mouse and usb wireless network thingy it seems to have a hard time booting, but when i unplug my usb mouse and network thingy it boots just nice.

It would be nice if i could turn on the power and then the netbook would just startup and show me a screen, and didnt have to unplug my usb things first...

View 9 Replies View Related

Ubuntu :: Black, Frozen Screen After Booting Up?

Mar 15, 2010

If I choose to boot Ubuntu, the splash screen appears, but right when the login screen should appear, I get nothing. This is how it started: While update manager was installing updates, I hit ALT+F2 to get to the TTY. I did this because ubuntu now refuses to mount any usb devices whatsoever. (for more on that, see this link: [URL] Once I got to TTY3 or whatever, I hit ALT + F7 to get back to the GUI. All I got was a black screen and a mouse. The computer froze and I restarted. All I have now after booting is a black, frozen screen. ALT + any F key to get to TTY doesn't work.

View 2 Replies View Related

Ubuntu Multimedia :: Black Screen During Booting Up?

Mar 30, 2010

I've installed Ubuntu 9.10 in my old desktop, i.e. Compaq Evo D510 e-pc:

Intel Pentium 4 1.7Ghz
1GB 400Mhz RAM
80GB HDD
Intel 845G chipset board
Onboard 4X AGP Intel Video chipset
Onboard audio

The above is my setup and Ubuntu runs perfectly fine when it is being cold booted, i.e. I shut it down during the night and boot it in the morning, it boots perfectly fine. But while using, it suddenly freezes and I'm only able to move my mouse pointer and nothing else works on the screen. I tried doing the Ctrl+Alt+(F1/F2/...) but nothing works.

So when I restart it using the power switch, it goes into the black screen and nothing loads up. I'm stuck over here. And if I turn it off for around 30mins by removing the power plug, and then reboot it again, Ubuntu loads without any problem and runs for sometime, then again the same freezing problem happens and I have to wait for another 30mins to boot it up again.

I have a 28" monitor connected to it and it runs at 1920 x 1200 (16:10) resolution at 60Hz.

View 5 Replies View Related

Ubuntu Installation :: Black Screen When Booting Into 10.10

Nov 8, 2010

I have been trying to install Ubuntu 10.10 64bit on my Windows7 64bit machine. I created the Ubuntu installation on a USB stick and when I run it live from the stick, it works fine. Under Windows7, I created a partition for Ubuntu, and after reboot run the installation off the USB stick. During installation, I pointed the installer to the partition I just created, and told it to use it as "/" (root - this is the part where I think I could have screwed up, but I am not sure). I want to have both Win7 and Ubuntu on that machine. I did not create the SWAP file as I don't think I'd need it (this is a 8Gb RAM 3Ghz i7 machine). The installation goes without any problem, but then I reboot...

When I restart after installation, and any time after that, I get to the grub screen that allows me to pick the system I want - and when I chose Win7, everything's fine. When I want to pick Ubuntu, or Ubuntu in recovery mode, the screen goes black, and after a short while it seems the monitor itself stops receiving any input from the computer, as it goes into standby. There is no error message, no restart of the computer, no message after I select Ubuntu and click enter. Nothing, just total blackness and despair, and a monitor in standby mode.

View 9 Replies View Related

Ubuntu :: Only Black Screen With Underscore When Booting 10.04

Jan 11, 2011

I just installed Ubuntu 10.04.1 (desktop edition) on my netbook (NB200), the installation worked fine, but when i restart i get a black screen with a blinking underscore on the top left corner. I don't have any options as any key that i press is just printed on the screen. (This happened with every version that I tried so far, even the netbook remixes).

If I don't press anything for some minutes, Ubuntu is finally starting, but without showing the Ubuntu loading screen in the process, like it did when I tried it with the USB.

View 3 Replies View Related

Ubuntu :: Not Booting The Gui It Just Shows A Black Screen With Text

Jul 20, 2010

I have a laptop Toshiba a65 s-1067 and i just installed ubuntu 10.04 but after updating the files that update manager said i restarted the laptop but now its not booting the gui it just shows a black screen with text going then it apears the logo of ubuntu in dark red backround with some text that i cant read cuz it disapears fast.. after this the screen just goes blan (dark red) and presing ctrl + alt F1 or F8 or anything doesnt work generaly no key works.

View 1 Replies View Related

Ubuntu :: Sometimes Not Booting - Screen Goes Black With The Blink Cursor And Nothing Happens

Aug 25, 2010

I have windows 7 + Ubuntu 10.04 in dual boot, I noticed that sometimes the ubuntu was not booting.

Right after I select the os in grub (ubuntu) the screen goes black with the blink cursor and nothing happens, that's all no messages it's stuck there forever.

Today, it does this every time I try to enter Ubuntu, it's just stuck there.

View 9 Replies View Related

Ubuntu / Apple :: PowerPC Booting Into A Black Screen

Jul 17, 2011

I've just tried installing Ubuntu 10.04 on my powerpc. It installed fine, and booted first time ok, but since restarting it just seems to boot into a black screen. My monitor says 'going to sleep mode'

I don't think it's hanging on anything, as I can hear sounds if I play around with the keyboard. Could this be something to do with the resolution being too high? If so, can anyone tell me how I go about changing this?

View 9 Replies View Related

Fedora Installation :: Black Screen While Booting?

May 27, 2011

downloaded Fedora 15 Live CD and made a booting live CD with it , everything went Okbut after the first screen " automaticlly boot after 10 s " everything just went creepy and the contrast of my screen has become very very low , I was able to see that unity booted but I barely could see the icons without being able to see anything esle , just dark*darkthe same happened with the usb live version .Im having a " Mageia RC " installed in dual-boot with windows 7 and I have the same problem with it . which means, the distro is there but cannot be used cuz the contrast is very very low

View 1 Replies View Related

Red Hat / Fedora :: Only A Black Screen Resulted After Booting?

Jan 20, 2010

Fedora 12 64bit - hostKVMThrough difficulty and pain I succeeded update Fedora. However today when I boot the PC only a black screen resulted (gui booting). I can type on the black screen. Pressing Ctrl+Alt+Del reboots the PC.The PC is working. I have another HD running Windows Vista. oot without problem. I'm now running it posting this thread via IE.

View 5 Replies View Related

General :: Black Screen On Startup After Booting

Mar 7, 2011

I am just new in Linux. Last week I install Linux Fedora12 into my notebook. The problem is sometime it come black screen when we want to start after booting. It also blank screen when want to tab to other properties in system. It is due to graphic card or else which the system used ATI Radeon.

View 1 Replies View Related

Ubuntu Installation :: Stuck With Black Screen On Booting After 10.04 Upgrade / Fix It?

Apr 30, 2010

Yesterday I upgraded from 9.10 to 10.04 via Update Manager. But when the upgrade procedure was finished and I made a reboot, I only come to the Ubuntu logo appears for a second, then the screen turns completely black and nothing happens. I then have to reboot via the power button.

But I can get it working with so far no problem, by booting to the third option in the boot options list. In the list there are several options, something like this code...

Now the question is; what does this mean when there are several alternatives with the same name? What is the difference between alternative 1 and 3, other than 3 is working and 1 is not? Is there any problem running alternative 3 instead of 1, and if so how do I get it to boot from alternative 3 as standard?

If this is not the right way to do it, how can I figure out what the error is on alternative 1?

View 9 Replies View Related

Ubuntu :: Black Screen After Booting - Input Signal Out Of Range

Aug 27, 2010

i installed a program called start-up manager. i fiddled with the display settings cause on startup of the computer my boot screens and etc were out of wack placed halfway across the screen and really pixelated. after changing the resoloution i restarted and just after booting everything goes black and it comes up with the input signal is out of range. ive tried to run livecd or live usb i should say as its on a usb stick. and search for commands to repair my screen settings but cant. ive tried to run grub cause i heard its a repair console by pressing and holding shift it doesnt work ive tried to ctrl alt f2 and other commands during start up non of them work. they all just result in that message popping up.

there is no repair console for me to access during start up. i just want to roll back to before i did this when everything was working. also half the commands given on other threads come up with error messages saying commands were wrong and such. and ive also started up bios to try and change display settings for it to magically work so i can login and change my settings back and nothing happens. im using another computer at the moment to find results.

View 2 Replies View Related

Ubuntu :: Ati Graphics - 10.10, OC'ing - Get A 'black-ish' Screen - Get Into Text Mode From Booting Up?

Dec 31, 2010

What happened was, i used sticonfig to attempt to OC my graphics card, it all seemed to work well, then i put some stress on the card and got a 'black-ish' screen. No matter i though i will boot into text mode (How do you do it normally? The only reason i could was because i crashed my system and could choose recovery mode to then choose text based) and change it back to default and it will all be fine, woo... But apparently you need to be in X server for that command to take effect. ****...........

How do i get into text mode from booting up?
How can i fix this?!

I have tried looking in BIOS but there is nothing there. Have i just fried my card? (It was close to max settings - although only on full load for like 1 second) Could booting up normally, and just 'going in blind' work, like opening up terminal with a hotkey and just entering the command from there....

Ubuntu 10.10
PowerColor Radeon HD 5870
Ati catalyst drivers installled

View 2 Replies View Related

Ubuntu Installation :: Not Booting Give Error And Black Screen

Jan 24, 2011

I have ubuntu CD. When I try to install it inside the window through wubi installer. I choose install inside the window. After installing when computer reboots. I got two option. When I choose ubuntu for boot. After 5-6 seconds a black screen appears like command and installation stopped here. {This screen is full of lines, somthing like...Kvasprintf..//.... acpi,,??//. It says lots of about ACPI. What should I do. When I boot through ubuntu cd, same problem arrives. I am new to ubuntu.}

View 1 Replies View Related

Ubuntu :: Can't Find Any Boot Loader. Screen Black When Booting

May 7, 2011

I recently installed Win 7 in a 4 partition hardrive. sda1 was some recovery partition. sda2 said "System Reserved". sda3 was my ext4 ubuntu partition. sda4 was my win7 partition. When I installed win7 I could only boot to win7 so I got onto ubuntu's tut for recovering grub and I attempted to recover it and I think I failed. When I boot I just go to a black screen. I since then deleted my sda1 & sda2 partitions (I really hope system reserved was not needed.) I'm still not 100% sure how the bios knows to boot straight to grub when it boots. What is the first thing on the hard drive that a bios looks for?? Anyways, the only access I have to a functioning comp is through a 10.04 live cd.

View 2 Replies View Related

Fedora Installation :: Black Screen After Count Down When Booting From CD

Mar 11, 2010

I am not sure what is wrong I am dual booting with windows 7 I have partitioned correctly when I boot from the CD The first screen comes up where it says automatically boots in 10 seconds. when it finishes counting down it pauses and then goes straight to a black screen I also tried to load Ubuntu and the same thing happened. Not sure what to do?

View 3 Replies View Related

Fedora :: Not Booting - Screen Quickly Turned Black

Jan 29, 2011

After dual booting into Windows to play Mass Effect 2, I hit the windows key by mistake, and the screen quickly turned black! Since then, I couldn't boot into Fedora, nor Windows; not even Fedora's linux rescue. I see the GRUB, I hit enter on any one of the two options, and all I see is a black screen!

View 3 Replies View Related

General :: System Not Booting - Shows Black Screen

Feb 23, 2011

I have a laptop which have vista,fedora 12. Today i have install another operating system ubuntu in my laptop. But when i restart it, it not boot up and show black screen. how to resolve this

View 1 Replies View Related

Server :: Booting On New Kernel After Update - Screen Keeps Black

Jul 20, 2011

I've got a problem with my Ubuntu Server 11.04 amd64, I think the problem comes from GRUB 2. Here is my problem : I updated my server and I now have Linux 2.6.38-10-server (in addition to 2.6.38-8) and, when I try to boot on version "10", I think I have a Kernel Panic because the screen keeps black and there is no use of the HDD (I can ear it working with version "8"). I also looked at /boot/grub/grub.cfg and I didn't saw any diference between the lines for v10 and those for v8 (except for "8">"10" of course).

I tried with Recovery Mode too, with this result : Loading Linux 2.6.38-10-server... Loading initial ramdisk...

> No use of the HDD (I don't ear it), and it's "frozen", can't do anyting but reboot it by ACPI (nothing happend when hitting "Num Lock") Another question : can we have no submenus in Grub2?

View 9 Replies View Related

Ubuntu :: Karmic Booting To Black Screen With Unresponsive Cursor Flashing / Fix It?

Apr 23, 2010

As the topic says. I'm having problem after problem, everytime I figure out a way to take a step forward, my PC has pre-emptively taken a step back.

I'm unable to boot to X or (recovery mode).

I did try booting to a LiveUSB in order to run update-grub, but then it occured I have no idea how to do this from a LiveUSB that will affect the internal HDD installation?

So I'm currently trying to reboot from Live USB, but that just seems to have locked up the PC on the white ubuntu logo. I'm afraid to hard reset it (been doing too much of that lately). How long should a Live USB take to shutdown? (been about 10 minutes so far ). It's not a persistent LiveUSB as far as I know, and I basically just booted to the desktop and then start the reboot cycle as soon as I realised I didn't know what I wanted to do .

View 8 Replies View Related

Ubuntu :: Nvidia Black Screen Afer Install Booting With Nomodeset

Nov 30, 2010

Running ubuntu 10.10, had to use nomodeset to successfully boot from cd into "Try ubuntu without installing" thing and install ubuntu.

Edited grub by adding nomodeset after quiet and splash in order to boot from hard disk, still booting that way as I'm writing. The computer is an All In one Pc called ONETWOPWU44. The graphic card is an NVIDIA g210m.

After booting into hard disk I installed the proprietary driver resulting in an alternate of white then gray then black then an Image with red blue and some other colours on the screen, not sure of the order but they came one after an other, right when the login form should appear, I am then able to login by tipping my password into the form and pressing enter, I now that cause I can hear the sound when the system loads but the above described situation continues.

I had the same result with an older nvdia driver it was 253 something, don't remember exactly. Then I downloaded the 260.19.21 driver from nvdia website and installed it, with this one I only got a black screen. I now have a fresh ubuntu 10.10 copy and would like to be guided in making this work. How do I install the driver corectly or how do I enable nouveau 3d support?

View 8 Replies View Related

Ubuntu Servers :: Black Screen Booting Natty Server 11.04 Both CD And USB Install

May 11, 2011

I tried booting up natty server on both a unetbootem usb flash drive install and on CD. I get the menu of options to install like Install Ubuntu Server, Install Ubuntu Server 9 expert install, Cloud, etc. Hitting install either the 1st or 2nd option leads to a black screen but not at a frozen state(I can still reboot with ctrl-alt-del). The server Im installing on is a ibm system-x rack with a single xeon and a raid5 already setup to be used for installation. Now Im back to using lucid 10.04.2 which I might consider upgrading through Update Manager since I cant get natty to boot correctly with a working display. Anyone having similar problems on Natty server stable release?Also as I post this, I dont see a ubuntu server prefix, maybe it should be added?

View 1 Replies View Related

OpenSUSE Install :: 11.2 Shows Black Screen While Booting Every 5th Time

Mar 15, 2010

I'm using OpenSUSE 11.2 64 bit. Sometimes boot fails and I get a black screen. It starts quite normal, but when it tries to start X and KDE, it fails and I only see a black screen. I can't switch to terminal and I can not reboot my computer by pressing "Ctrl + Alt + Del". It doesn't even shutdown by pressing the power-button. The only possibility is to switch off the computer. Then it normally starts.

The problem also occures with a clean installation of OpenSuse. And it cannot be solved by updating kernel, X-Server and KDE.

What files do you need? I'll post them.

The same computer worked fine with OpenSUSE 11.1. I think, the new radeon driver could be the problem, I have to use it because I can not use fglrx anymore as with 11.1

I take a look into my log-files, but I cannot see any error. Sometimes it seems, that /var/log/messages is partly overwritten by restarting the machine.

lspci:

Code:

Code:

View 9 Replies View Related

Ubuntu :: Booting - Black Screen And Error (initlymouth-splash Main Process(856) Terminated With Status 1)

Jul 1, 2010

When i boot my pc there is a black screen and then a message appears (initlymouth-splash main process(856) terminated with status 1) Some other times only this appears '' _ '' blinking (i don't remember how it is called in english,sorry) I hold Ctrl+Alt+Delete and then the screen where i choose profile comes up. I have 10.04 since they came out,and didn't have any problem except one issue with my belkin adaptor,but now i can't sync my iphone with rhythmbox or detect any flash sticks.

View 1 Replies View Related

Ubuntu :: Doesn't Booting Up - Black Screen Appears With The Text: Init: Ureadahead Main Process (306) Terminated With Status 5

Sep 11, 2010

I installed Lucid Lynx on my laptop a couple of months ago and for the most part everything was working fine. However, just recently the computer doesn't seem to be booting up at all. I start up the machine and then a black screen appears with the text: init: ureadahead main process (306) terminated with status 5 the (#) is different in some boot-ups

And the computer just hangs there. typing anything doesn't seem to help at all. I press enter and a new line just appears. I've left it there for hours and still no login screen.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved