I recently installed Ubuntu 11.04 on my laptop. I uninstalled, now I installed again. I used WUBI both times. This time, every time I boot, (after I select Ubuntu in the wubi and grub bootloaders) I get a blank black screen with a flashing _ in the corner. Then I get to the login screen and it works like normal. Are there any solutions for this? I'd sort of prefer to see the ubuntu logo and flashing dots.
View 5 Replies
I had a problem with my system today when I came home and unlocked the screen and the single program I had left running had crashed and so did AWN, I restarted the system and it just goes to a blank screen just before it got to the login and does nothing. I reinstalled the system and reinstalled the ATI drivers downloaded from the ATI website just like I had previously (had problems with the Ubuntu drivers in the past) and rebooted the system and got the same blank screen... Now I'm on my second system reinstall of the night but haven't installed the ATI drivers yet, but I need them to set up my dual screen gig.
View 5 Replies View RelatedOn this Lenovo netbook: I was playing with Firefox, came across a security.ubuntu.com problem, established in general terms what it was referring to and that it might be easier just to reinstall Ubuntu andupgrade to 9.04.Succesfully installed, it said, please to do a restart. But the screen is blank. Now, all I have is a totally dark screen whether booting off the hard drive (it starts running and clicking, then stops clicking; staysrunning 'til I switch off again) or via the external CD drive (which lights up, flashing, for a few moments while clicking, then runs down).
I've tried the Ubuntu CD which originally installed ok, and also the one from which I'd first installed Ubuntu instead of XP.I wondered if I'd inadvertently switched off the screen, but apparentlynot - in any case, presumably it would default to On? I've also looked forsomething on an external screen, I know that works because I played with
it a few weeks ago. fn-F" to toggle the screen doesn't do anything, nor fn-up/down to change brightness. I've just tried ctrl-alt-backspace, with CD and HDD, to no effect.
The battery's fully charged but in any case I'm using the psu and alllights are correctly lit. I've reseated the CD leads several times to besure.I've never networked it to the desktop - it had seemed a good idea to keep them separate so only one gets broken.
I have a Asus A8N-E motherboard with AMD64 processor and NVidia 6600 GT graphics card.I downloaded the AMD64 version of 10.04 (the boot+live cd) and tried booting with it. After looking at the screen showing Ubuntu loading with 5 dots moving forward for about 5minutes, the screen went blank (not completely blank as power-off but a very dark grey color). I waited for about 10-15 minutes in this state but nothing happened.During this whole 10-15 min period the disk usage on the machine was high.Eventually, I just turned off the machine and booted into windows (which was already present on my machine) successfully.Is that blank screen for such a long duration a normal step during installation or was a different process expected?
View 1 Replies View Relatedseveral months ago I installed Maverick and it worked well, but eventually I lost the GUI. I fiddled with it to no avail. So I decided to do the Natty upgrade and it ended up not fixing the problem though I am able to boot to graphics safe mode.
I popped on this forum and a couple others but got little response and ran out of fiddle time. SO now I have a little time to mess with this, and I REALLY want to move back over to Ubuntu so if any one is familiar with that could be the issue
So I Installed OpenSUSE A Plethora Of Times. In Both 32 & 64 bit. But No Matter What After It Boots Up And Where I Should See Some Kind Of User Interface The Screen Is Blank. Now this Is The Point Where You restart The Computer And See Where You Went Wrong But Come to find Out My Power And restart Buttons Dont Respond So i Have To Pull the Battery Out Of My Laptop.
View 4 Replies View RelatedWhen I start my system on the Ubuntu 10.10 CDROM I get a tiny icon at the bottom, then the screen shuts off due to no signal. So I cannot run the Live CDROM. Relevant here is that Debian CDROM runs just fine. (Lenny installs and runs good, but squeeze does not) Linux Mint (based on Ubuntu) gets me a pretty graphical welcome screen, then the monitor shuts off just like Ubuntu and Kubuntu.WinXP installed and runs without a hitch.
My system: Gigabyte GA-P43-ES3G with 4Gb ram, 750 Gb SATA HDD, Nvidia Quadro video card.I have gone through the BIOS settings looking for clues:SATA AHCI mode is set to IDE (versus AHCI)SATA port 0-3 native mode set to enabled (versus disabled which would be legacy IDE mode)Azalia codec set to auto (verus disabled)
I downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies View RelatedI installed rhel 5.0 on my hcl laptop, all steps completed successfully, but after booting it goes blank nothing happens, I also have a windows xp installed in c:
View 5 Replies View RelatedI am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
View 4 Replies View RelatedDuring booting my ASUS 1215T behaves abnormally. It blinks and some part of the screen gets blank during booting. After booting things get normal. For Fedora 14 and Windows 7 no problem found. My netbook has AMD HD4250 Gfx chipsets with embedded AMD RS880M chipsets.
View 2 Replies View RelatedI just put on my Linux PC now and after booting logging into the user a/c, it just gives a blank screen with the desktop wallpaper - no menu's or anything, so there's pretty much nothing I can do. I know I had removed the menu and replaced it with the dock (awn dock or something).
However, I can log in as root and root works fine (so I'm doing the update at the moment).
Coming back to my question, I used to know an Ubuntu command which I put in as sudo (terminal)and it used to work like a magic command which would literally restore and repair my linux installation - I even used it when I bought a new system and transferred my linux hard drive from my previous machine to the new one and this one command actually setup and prepared my linux installation to work smoothly in my new PC - just one command after connecting my h/drive in the new PC.
My screen goes blank for few minutes during booting to print the login page.
When I press ctrl+alt+f1 it shows and hangs at
Enabling /etc/fstab swaps
I show below the output of some commands:
[root@ws-test ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 76G 55G 18G 76% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
/dev/sda3 56G 34G 20G 64% /hdd-1
[Code].....
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedI recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
Reformatted and reinstalled Ubuntu 11.04 on my Acer Aspire One netbook. It crashed the other day when I turned on desktop cube.Everything was fine, I installed the gnome desktop environment, but I powered up the netbook this afternoon and it is doing the same damn thing it did after I activated desktop cube, booting into a black screen with a flashing underscore on the upper left, that responds to absolutely no keyboard input. I'm forced to hold down the power button until it turns off. This has apparently happened for no reason. Not particularly happy today.
View 1 Replies View RelatedIs there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View RelatedThe day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies View Relatedlike any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View RelatedI received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
I downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
View 4 Replies View RelatedMy problem is that I can't log in to Ubuntu, as you've already seen in the title. Here's what's happening:
I turn on the computer. I see the GRUB. I press Enter. I see a blinking underscore (_) as if i was in a terminal. The underscore disappears and I can see my cursor, but nothing else. I can move the cursor, but that's all I can do.
I've seen some similar problem here on the forums, but he could log in, he just couldn't see the screen.roblem!
