I used startup-manager to change the timeout of my bootloader from 10 to 3, which it worked, but it also set my resolution for the bootloader and startup (where it shows the ubuntu logo) to 1024x768. how can I change it back to 1366x768, which it originally was when I installed.
View 1 Replies
I have an Emachines T3042 on Acer X183H Running Ubunutu 10.04.
I downloaded the Video Drivers and im getting a 320x120 or something and 640x480 and the monitor suppose to go to 1366x768 how do i get that resolution?
I am having a bit of an issue with xubuntu's resolution detection. I currently have a monitor plugged into my machine, the xubuntu machine picks up the native resolution of 1920x1080, but for some reason it does not give the option for 1366x768. i find this weird because any monitor that can do 1920x1080 should be able to do 1360x768 as well. The machine is running an intel card, so manual resolution changing via nvidia control panel isnt an option. Im wondering, what is the simplest way to enter a custom resolution into xorg.conf, or any other easy methods of adding the 1360x768 option into the machine?
View 1 Replies View RelatedBrand new laptop Lenovo G570 with Intel Integrated HD Graphics 3000, 15.6", 1366x768. can't detect the correct resolution with Ubuntu 10.04.2 LTS.
View 7 Replies View RelatedI have screen that will perform to 1366x768 and X will only let it perform to 1024x768. It is really annoying.
View 6 Replies View RelatedI have had a lot of problems with my screen resolution 1366x768. So I am wondering does openSUSE 11.4 support resolution 1366x768?
View 3 Replies View RelatedIve been searching for days and days trying to get this monitor to output in 1366x768 on Ubuntu 10.04. I knew it was possible, i did it late one night about a month back, but my system became unstable (not due to the resolution, i had setup a firewall to block all incoming till i unlock it, then another application to connect before i log in, and somehow it managed to lock out my keyboard on the login screen AND the recovery console, so i decided to just reinstall it)
Anyways, i found out exactly how to do it (for the Acer 183h that is). Ive spent about 48 hours total pouring through documents and found the documentation for nvidia-settings (easy find, i know, i was hoping to find an easy solution like what im typing up)
So, i figured out I could use Nouvaeu to get the proper settings (since all the modeline calcs dont do 1366, only 1360.) What i did was i went into the log file for the xorg,conf right after i installed, and in there somewhere near the middle it says what the timings are.
Code:
And i inputed that modeline into the monitor section, like so:
Code:
One of the two EDID commands is an old one, i just left it in there so when i was searching throught the xorg log i could find the section really quickly.
(BTW, im not sure if these timings are 100 accurate until i reboot my livecd and check, but im sure thier pretty damn close, and my monitor hasent exploded yet if your worried bout it, grab your livecd, open your xorg.conf, and it "should" be in the monitor section)
Next, i had to input all the Options to not search for different modes into the device section:
Code:
And finally, i had to set the screen to output the 1366x768, entering Modes "1366x768_60_0"
Code:
In the Modeline and Modes section, its VERY important that you have it in the format i have it in. The Modeline name MUST be completely custom, by adding either letters or extra _0.
And thats it!
Reboot, restart X, whatever (I prefer reboot, gives me time to ponder ) and you should be good to go.
(I know this may seem like a beginners knowledge type of thing, but im a beginner, pretty damn bright, and it still took me 4 days So, if this helps just one other person, ive done my part)
Im also pretty sure this method will work with other wide screen monitors, as long as you get the timings off Nouveou via LiveCD or installing the driver.
i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies View RelatedI have using fedora 14, when i want boot into system the console resolution goes to 1600x1200. i want change the resolution to 1024x768-85.
View 1 Replies View RelatedI have tried this with many different configurations, however, I believe that the scroll bar that shows the progress of the boot is preventing it from changing successfully. I don't know how to switch it off. X is not installed. No gui, only tui.
View 5 Replies View RelatedWhen I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies View RelatedSuddenly Ubuntu goes into low-graphics mode the last couple of days I have had to reboot my Ubuntu-workstation when the screen suddenly goes black. After some seconds I get a pop-up with the message: Ubuntu is running in low-graphics mode. There is some buttons that tells me I can do different things but whatever I do I end up loosing all windows I worked in earlier. And having to reboot to get back full resolution [URL].
View 2 Replies View Relatedstarting again with Linux since I crashed W7 and got tired of it. Running Ubuntu 1104 on Toshiba G30 with two drives. Installed 1104 on SDA
Two problems
1. On computer start-up it freezes, blank display with no action from the HDD
2. On selecting the HDD from the menu by pressing F12 and then HDD1 I get the same problem.
I can overcome this by changing grub to 'noquiet nosplash nomodeset' but then I get of course the full goomph on the screen. Could this be a display driver problem since I noticed that I can not get the full 1920 x 1200 resolution?
I'm got ubunt-desktop running VirtualBox. I installed MS XP HOME on a virtual disk. so everything *works* .. but I'd be a lot happier to have the box opened up all the way to my Ubuntu top-and-bottom bars.
View 6 Replies View RelatedI have two video outs on my AGP video card. One is VGA and the other is S-video. I tried connecting the second monitor (Viewsonic) by itself to the VGA port and it works fine and runs at 1280x768 very clearly. I then attached the LG monitor instead to the VGA and attached the Viewsonic to the S-video port. Now it is running at 1024x768 and I have no option to increase the resolution.Is this a limitation based on S-video being worse than component, which is worse than VGA and it simply cannot handle the data density for larger resolutions? Or would it be my video adapter? I swear I had monitor control working fine through the panel, but now when I click on the monitor button it says, "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?" and that opens an Nvidia X control panel.
Also, using S-video means the computer doesn't recognize the Viewsonic LCD TV properly, it just recognizes it as a TV. Is this because S-video doesn't play nicely with EDID reporting?It would be nice to get a sharp picture on that TV, the way I had when it was connected like a monitor via VGA. I am not sure what's going on anymore, so any help on clearing up driver issues or getting configuration apps installed or anything like that would be helpful.
problem happens after installing nvidia driver.everything was fine.the nvidia driver has been detected and functioning correctly.but my monitor,acer x173w which can go for maximum resolution of 1440x990 but i'm still using 1024x768.
View 1 Replies View RelatedGot a system that I've been using for a long time now without any problems. Now suddenly it won't use a higher resolution than 1024x768.I never added any mods to the configuration and have not added any software other than recommended updates it quite a while.Any ideas what happened or how to fix it? I checked and the monitor/graphics card will still do upper resolutions with windoze so I'm guessing the hardware is alright.Using OpenSuse 11.3, 64bit, on a dual core athalon with a Sapphire ATI x1600 graphics card and a 22 inch flat screen that is supposed to go 1600 x 1050.
View 6 Replies View RelatedToday my desktop reverted to 1024x768 resolution immediately after init. I tried changing it back but only 1024x768 and 800x600 are listed as supported in the display settings, even though my monitor supports resolutions of up to 1360x768. Rebooting the system did not solve the problem.I'm running Fedora 15 x86_64 on kernel 2.6.38.8-35 with the proprietary nvidia drivers of version 275.09.07. My monitor is a Samsung SyncMaster 933n. nvidia-settings is apparently not detecting it correctly, it thinks I'm using a CRT monitor.I was actually in this exact same situation a few months back, but it kind of went away on its own, so I didn't mind too much. So, what could be causing this, and what can I do?
View 13 Replies View RelatedThere are 5 copies of the same images are placed in a folder i.e. large(1024*768),medium(500*375),small(240*180),thu mnail(75*75),square(100*50) in size....
The following code upload number of Geocoded images(square size) when the page loads.I want when someone click on the any Geocoded image on the page ,it should show the large image(1024*768) of the same.And further click on the large image it must show again the square size image of the same.
Following is the actual code.It is in .js file.
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
I mistyped my own name when installing Kubuntu 10.4 and realised it only recently. How do I change it? I tried chfn, but it complains about "name with non-ASCII characters" and won't change my name. Google is not usefull... So, what is the proper KDE way to change my full name?
View 6 Replies View RelatedI'm using Ubuntu 11.04 and using the fglrx driver from repo, but i can't get 1366x768 resolution. I generate xorg.conf with "sudo X -configure" and put in the Modeline that was copied from windows powerstrip, which works fine under windows with catalyst. and restart X, the lcd gets 1366x768 resolution as expected. but the "sudo X -configure" generated xorg.conf was using "radeon" driver, but blender won't work with it, etc... I want to use "fglrx" driver. So I change the Driver section from "radeon" to "fglrx" and restart X, it wont start now, telling me that out of range or something.
Section "Device"
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:5:0"
EndSection
I've currently got a Dual-boot of Windows 7 SP1 and Ubuntu 10.10, I'm wanting to wipe off the Windows 7 and keep my Current Ubuntu 10.10 (And ofc add the extra space from the Win7 Partition)I had Win7 Installed first and I used this Guide --> [URL] Below is an image of how my hard drive is partitioned currently.
All the Gray = Win7
All the white = Ubuntu
I've just bought a new rig. The graphics card (as listed in the title) is a ATI Radeon HD 5830. With the normal out of the box drivers I can get a resolution of 1366x768 (The native resolution of my 32inch panel) but the 3D performance isn't good.With the ATI proprietary drivers installed 1366x768 isn't in the options (The ATI menu and the normal one)So I need to generate an xorg.conf and add the resolution?[edit] OK so I checked to see if the 3D performance was any better with the proprietary drivers (despite the funky resolution) and it caused Minecraft (The only game I really play under Linux) to freeze on startup. I think what I'll do is stick with the Radeon Open Source driver (which runs all the visual effects nicely anyway) and just do all my gaming in Windows
View 2 Replies View RelatedNow I am using fedora14,my desktop is Gnome,my terminal is Urxvt.How can i change it to be full screen?
View 1 Replies View RelatedI recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
I have Ubuntu 9.10 on my desktop pc and Ubuntu Netbook Remix 9.10 on my Acer D250 10in Netbook.
I want to change my netbook Remix 9.10 to the full version of Ubuntu 9.10 as on my desktop
Is this possible and if so what do I do.
Ok, I'm sick of Grub2. It's a total mess that is needlessly complicated in the worst fashion imaginable. (Yes, I've read https://help.ubuntu.com/community/Grub2, it doesn't help.) I can't understand Grub2 developers thinking (maybe they're aliens?) and, quite frankly, I just don't care anymore. how to change resolution for textmode terminals (tty1, tty2, ...)? I don't want to read any more [censored] about gfxpayload and how it's supposed to work. Please don't respond if you can't provide an example config that simply just works.
[Edit/SOLVED]: No longer an issue in Lucid Lynx for me. See this HOWTO. Note that 1280x1024 isn't the only option. You can use any resolution supported by VBE of your video card. Use vbeinfo command in Grub shell to see the list of available display modes.
when i try to change my resolution in 10.04 i get a msg saying"it appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?"
View 5 Replies View RelatedI have just installed Ubuntu 10.04 server on VM. Installation went well and now im trying to change the console resolution. I have changed the grub.cfg file and added the "vga=791", but after rebooting I get a black window (on the vm), nothing written nothing is happening.
View 4 Replies View Related
