I have a problem with "places" in the panel. Error file not found comes up on all top 7 in list from Home folder to downloads. I can get to my files by going via computer, and to file system. How do i restore, so these items in Places work again ?
View 2 RepliesI was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
View 1 Replies View RelatedI am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
when i wget aro2220.com it displays
--2011-03-02 16:35:58-- url... 127.0.1.1
Connecting to aro2220.com|127.0.1.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 177 [text/html]
Saving to: 'index.html'
100%
2011-03-02 16:35:58 (12.4 MB/s) - 'index.html' saved [177/177]
However, when I look into the file it is actually blank saying something like "It works! This is the default web page for this server" which can't be correct since that is not what Aro2220.com actually displays.
Furthermore, when I try to wget files I've put on the server for myself it returns a 404, file not found.
I've just got Ubuntu 10.10 and I also downloaded the most recent version of Wine at the same time, but I've got 4 torrents I've downloaded and I can't run any of them this same message keeps coming up:
"Archive: /home/thedemonkiller/Downloads/AnyDVD 6.7.1.0 + Key-[HB]/setup/SetupAnyDVD6710.exe
[/home/thedemonkiller/Downloads/AnyDVD 6.7.1.0 + Key-[HB]/setup/SetupAnyDVD6710.exe]
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive.
zipinfo: Cannot find zipfile directory in one of /home/thedemonkiller/Downloads/AnyDVD 6.7.1.0 + Key-[HB]/setup/SetupAnyDVD6710.exe or
/home/thedemonkiller/Downloads/AnyDVD 6.7.1.0 + Key-[HB]/setup/SetupAnyDVD6710.exe.zip, and cannot find /home/thedemonkiller/Downloads/AnyDVD 6.7.1.0 + Key-[HB]/setup/SetupAnyDVD6710.exe.ZIP, period.
No zipfiles found."
After trying to boot into ubuntu grub gave me an error 15 saying the the file could not be found.
View 3 Replies View RelatedIv been using ubuntu on my laptop for just over a year now and thought it about time my desktop got the same. I cant get rid of the vista section of the disk because of things i have on there so a friend gave me a spare 80gb hard drive to have a play with it and go from there. So first of all installed unbuntu 10.10 on the hard drive alls fine i can boot into both vista and ubuntu, i then want to install backtrack 4, so i booted the backtrack disc and off we went, i split the 80gb hard drive in two and installed backtrack to one section, now i cant boot to anything other than backtrack. I got an option for ubuntu although this does look different now (showing up as 'ubuntu, with linux 2.6.35-22-generic-pae') when i go to this option i get the message "error 15:file not found" I also have the option for other operating system, i get this message when i choose this option "error 11: Unrecognized device string"
View 1 Replies View RelatedI am using ubuntu 8.04 with dell inspiron mini. Since couple of days, I got following error
error 15: file not found
Press any key to continue
After than
it appears
Ubuntu 8.04.2 kernel 2.6.24-27-lpia
Ubuntu 8.04.2, kernel 2.6.24-27-lpia ( recovery mode )
Ubuntu 8.04.2, kernel 2.6.24-24-lpia
Ubuntu 8.04.2, kernel 2.6.24-24-lpia ( recovery mode )
Ubuntu 8.04.2, kernel 2.6.24-22-lpia
Ubuntu 8.04.2, kernel 2.6.24-22-lpia ( recovery mode )
System Restore
Use the Up and Down keys to select which entry is highlighted press enter to boot selected OS, "e" to edit the commands before booting, or c for command line.
Before it was not like this. How can I fix it for smooth running.
I tried to install Ubuntu 10.10 with a USB stick, but when I start the computer with the USB stick I got this:
SYSLINUX 4.02 2010-07-21 CHS Copyright (C) 1994-2010 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! Boot: I did a MD5SUM of my .iso file and it say "MD5 Check Sums are the same".
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
I have a long running 9.10 installation. All of a sudden, on boot, I get this error: "loading initial ramdisk error: file not found" If I hit 'E' at the menu entry, I can scroll all the way to the end of the boot command, and it appears that the last 'c' on 'generic' is missing from the kernel name. If I add the c and hit ctrl-x it boots fine. The grub.cfg appears to be correct, it has the full generic spelled out.
View 9 Replies View RelatedMy problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies View RelatedI have a problem with my Ubuntu 9.10. I found on some help forum on how to clean up the boot menu some of the options for previous updates.So I went to terminal, typed gksu gedit /boot/grub/menu.lst
View 3 Replies View RelatedHave a Dell Inspiron 4100 laptop. 1GB RAM and 1 Ghz processor. Has a working install of Oracle Enterprise Linux 5.4 OEL uses Grub version 0.97 My OEL install works well and I do not want to make any changes to it such as upogarding GRUB to a later version etc.
I have installed Xubuntu mini and this completed without a problem.
I have a single hard drive.
I went into OEL and mounted the Xubuntu root drive so I could see the /boot/grub/menu.lst file.
I copied the entries for the main xbuntu kernel etc and pasted them into my OEL grub.conf.
title Ubuntu 10.10, kernel 2.6.35-22-generic
uuid d6ed555c-54a3-4639-af25-3582c60624ad
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=d6ed555c-54a3-4639-af25-3582c60624ad ro quiet splash
[Code]....
I am doing this so someone else can borrow this laptop for internet use for a few weeks and OEL is not very user friendly and also want to protect my install.
I have an HP Pavilion DV 6500 laptop running Windows 7 and Ubuntu (via Wubi). I just updated Ubuntu to 10.10 from 10.04. After restoring the Windows bootloader (which I need to do every time Grub gets updated), I can no longer boot up Ubuntu. When I select it from the bootloader, it gives me a couple of errors, the final one being: Error: File not found And then reboots the system automatically.
View 1 Replies View RelatedI'd like to install Ubuntu 10.10 in my laptop. So, I downloaded the iso file and burned into CD. I'd like to install into D drive since I use Windows Vista in C drive.
Below is the specification of my laptop.
Mobile AMD processor 2 G HZ, 1G RAM 32-bit Windows Vista Home basic
Harddisk C : 46 G (18giga free), D : 10 G (10giga free) How can I make partition and where should I start with, either Beginning or End of existing partition? SWAP? I watched a few videos but stlll can't grasp clearly how to do. I tried to boot w/ Live CD. But I didn't see the 4 different options: Try out without installing, Memory test, Ubuntu Disk test, Install Ubuntu, and Booting w/ harddisk. I had only 2 options; Try out w/o installing, Installing. Why is it so?
In addition, while booting w/ Live CD, I saw a message as following:
Error: b43.../firmware file not found.. something like this.. it was too fast to catch! However, I went on and show its desktop screen. May I not be able to install in my laptop? Does my laptop have any faulty disk or memory? I wonder. Finally, I use Wireless connection in the library so when I boot with Live CD, then internet is disconnected. Should I need to be connected before installing?
I did an upgrade and now getting grub error 15 file not found on boot, memtest runs ok. any help would be appreciated. system information is listed below:
Find /grub/stage1
hd(1,0)
Menu.lst
[code]....
I have been using various versions of Ubuntu for many years. I love it and I want to stay with it. Now I need help more than ever. So basicly I've searched through forums and other sites which seem to have had the same problem I am having.
However, I've tried all the "fixes" and nothing works at all at this point.
Here is what I have tried so far: [url] and every suggestion here: [url]
When I put in "sudo fdisk -l" I get this:
So after trying the suggestions in the above links I would restart and still get: "error: file not found. Grub rescue>"
I am trying to install it from a usb to an external hd. I installed Ubuntu 8.4 on the same hd before and it worked fine however I need one of the newer versions to use the programs I need. I've been at this for hours and maybe I am just missing something simple.
I've had my Ubuntu crash and had to reload it. I;ve reloaded 9.1 and am now getting the error
GRUB loading.
error: file not found
grub rescue>
I have tried a number of solution attempts I've found on the internet with no success.
I have Windows 7 also loaded however I'm not getting a Grub menu only the error above. I seem to have a number of Linux partitions I believe my correct one is on sda7. I had at one stage tried to have a boot partition on sda4.
I am getting and error on my Fedora Core 12 desktop when I try to boot that says " Error 15: File not Found
Press any Key to continue."When I press any key, its take me to the Grub boot loader screen. When I choose a kernel to load, it then takes me back to the black screen that says "Error 15: File not Found Press any key to continue".The last time I had the desktop booted I was using the Gnome disk analyzer and the system froze so I had to perform a hard reboot. Thats when the error started occurring.
Have searched around the web and here but can't find what package to load to solve the problem. Running 9.10
View 4 Replies View RelatedBeen trying to solve this using Google for a while. Well, I recently did: sudo apt-get dist-upgrade. Now, whenever I boot up I get "Error #15: File not found."From what I've gathered, something is wrong with my menu.lstI've tried several things to fix this, but I can't figure it out.
Code:
#
# examples
[code]....
I just (basically) completely uninstalled my OS by accident. In synaptic package manager I selected to completely remove volume control (which had been going haywire for god knows what reason) with intent to immediately reinstall. I didn't put 2 and 2 together when it said it'd remove all related files including the kernel... hal... restricted drivers... everything got uninstalled. Network manager crashed...
I decided to try my luck with restarting (what was left) of the system. Now I'm looking at a boot screen of:
loading grub...
error 15: file not found.
Did I have to just make a boot disc and reinstall the os? or can I just "put the pieces back together" as it were and reinstall with a 'sudo aptitude update' once I get network up again?
When I boot my computer (emachines E528 laptop), it gets to the BIOS loading screen (the one where you have the option to press a function key to get to the BIOS settings), then it goes to a black screen and looks like it is going to load GRUB, but instead of loading GRUB, the computer reboots. It does this endlessly, unless I insert a LiveCD. So, it's not the BIOS. That's good. When the Mint GUI (Linux Mint was the LiveCD I was originally using as I just happened to have it on hand) loaded for the first time, I checked all of the hard drive partitions and they all seemed to load fine. So, it's not a mechanical problem with the HDD. That's good.
At this point, I figured the MBR had become corrupted somehow. Now I wasn't really sure exactly where the MBR was, or how it all worked, but I was pretty sure that if I just reinstalled GRUB, everything would be hunky dorey. Unfortunately, I hit a road block when trying to install GRUB. That's not good. I am trying to follow the instructions in this thread, but I get the following error:
Code:
grub> find /boot/grub/stage1
Error 15: File not found
So then I tried following the instructions here, but I don't know how to tell which drive is sda1, sda2, etc. I'm guessing there's some terminal command to figure it out, but I don't know it and Google was less than helpful. I feel like something that basic should be easy to find, but I digress.i am getting very close to backing up everything and reinstalling everything. Only problem with that is that I am not sure how to access the files on my Ubuntu partition as they are encrypted (I wrote down the key when I started it up, I just don't know how to bring up a prompt that will let me enter the key). I really don't want to reinstall and set everything back up, but if I have to I will. how to tell which partition is associated with which sda#, or how to access the files in my encrypted Ubuntu home folder. How do I tell which partition is associated to which sda#? How do I open my encrypted home folder from my Ubuntu partition?
I have two partitions installed on my computer, Ubuntu 10.04 (part. sda2) and Windows XP (part. sda1). When I restart my computer I get this message:
error: file not found
grub rescue>
I thought this must be a grub error, so I booteda Super Grub disk (v 0.9799). Then I tried to fix grub with the Super Grub disk, but I got this message:
Error 15: File not found
Booting 'not lucky'
pause SGD has NOT succeeded
SGD has NOT succeeded
I then booted the system using an Ubuntu live CD, version 10.04.I tried to repair the sda2 Ubuntu partition. At a terminal prompt I ran [code] sudo e2fsck -f -y -v /dev/sda2. This did not work. It ended with "e2fsck aborted". I could not repair the Ubuntu partition,
I tried to open the sda2 partition by running the terminal command [code] sudo mount /dev/sda2 /mnt. I received the following message:
mount: wrong fs type, bad option, bad superblock on /dev/sda2
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Using the ntfs-config program, I can easily mount the Windows XP partition (sda1). It mounts and I can read or write the files on the Windows XP partition. So at least Windows XP is not damaged. I downloaded and ran the boot info script, and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub .....
i have a dual boot system set up right now through wubi. the installation went fine. but then i tried to upgrade ubuntu from 10.04.2 to 10.10. the update went fine, no errors. but afterwards when i restarted my computer and selected ubuntu, it said "error: file not found" it didn't even get to grub. this has happened numerous of times trying to upgrade in the past.
p.s: i have vista installed as the other side of the dual boot.
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
View 1 Replies View RelatedIf i compile my.tex file using the command:latex my.tex I am getting this error:! LaTeX Error: File `pause.sty' not found.Type X to quit or <RETURN> to proceed,or enter new name. (Default extension: sty)
View 1 Replies View RelatedI'm trying to do a svnsync of this public repo: http://svn.runuo.com/repos/runuo/devel/ so I can access the repo when my machine is offline. I get this error at revision 419 svnsync: File not found: transaction '419-bn', path '/devel/Scripts/Engines/Doom/Lamp Room/LampController.cs'
I am using svnsync, version 1.6.5 (r38866)