Attempting to use PLACES>Home (or Documents,Bin,Desktop,etc.)brings up the error message "There is no Windows program configured to open this type of file." If I open Open Office I can find all files in home, documents, etc. and open them.The computer is otherwise functioning normally but using the usual methods all the files that should show look empty. How did this happen? I was attempting to use WINE to load Avery Wizard (a Win utility) through AWsetup.exe. To do this I changed permissions for that file but I have subsequently removed the file and its subfiles using the terminal.
i am downloaded some e-books in the format .rar. when i am extracting them i am getting error as There is no command installed for RAR archive files. Do you want to search for a command to open this file?
I'm fairly new to Ubuntu/Linux. Here's the problem I'm encountering after I tried to install Ubuntu Desktop 10.10. I was installing from a CD, as I tried to install alongside Windows XP, (The setup detected 2 hard drives, the first one was 40 GB, with all my windows stuff on it, the other was a 160 GB one), I got the message "error informing kernel about changes made to .....", which would not disappear no matter what I clicked. So, choosing the seemingly only option, I force powered down the computer. As I powered it back on.
Windows did not boot, instead I just got a black screen of nothing but a flashing _. I tried booting from the LiveCD again, which worked well enough, EXCEPT, the 40 GB hardrive full of my Windows stuff and files was not detected, and the 160 GB drive was detected only in the drives tool, but not accessible. I have no clue as to how to: 1. retrieve important files from my 40 GB drive. 2. Restore Windows XP professional.
I accidentally removed my network manager (gnome) from my system (via synaptic) and hence have not been able to have access to the internet to reinstall the packages. I have experimented with many commands (with help from others) in terminal with little success.
What I now did was downloaded a 'NetworkManager-0.8.0.999.tar.gz' file and a 'NetworkManager-0.8.1.tar.bz2' file (from a different comp) and have placed them onto my desktop. I have read the INSTALL instructions within and it is a tad complex for me as I am new to Linux. I understand I have to extract the files and compile them into a new folder (I think I would choose a file in the /home directory)- how would I go about doing this? Following this, I need to './configure' or 'make' or 'make install' the files
After upgrading to Natty Narwhal my Crypt Keeper app will not launch. I am now unable to access secure files. Has anyone had this issue after their upgrade to Natty Narwhal? If so, How were able to resolve this issue.
I have a few ubuntu servers which have samba shares on the network and for the most part have had little trouble with them. Recently we purchased a few iMac's for one of our deptartments and, while we're able to access the shares, all the files on them are read-only and we are unable to delete/modify files using the iMacs. This is not an issue with any of our windows machines (W2K, WinXP, Vista).
Every time I try to install something, I get an error message saying : Cannot access installation media hd:///?device=/dev/sdb1 (Medium 1). Check whether the server is accessible. Show details says : Empty destination in URl: hd:///?device=/dev/sdb1. What I gonna do? I'm new to Linux. Is it a NTFS access problem or something like that?
I have a lenovo x200 laptop running Fedora 14, fully up to date with the Fedora repository. Seemingly out of nowhere, some websites will no longer load. First it happened to www.facebook.com, next (after a day or so) wikipedia.org, now the Fedora forum. Other Internet access seems fine, but when I try to go to these pages I just get "unable to find host" errors. Its totally bizarre. It first happened in an airport so I thought it was just a strange network there, but now it happens at home. I can't get on these sites in firefox or elinks browsers (in a terminal) BUT I can ping both sites no problem. Also, the other computers in this house have no problem visiting these sites.
we are trying to install this NIC Rosewill RC-400 Chipset RTL8169S-32 in Ubuntu 9.04 we downloaded the drivers from Rosewill website (For kernel 2.4.x and 2.6.x V 3.1) but when we follow the instruction in the readme file and do make clean modules and error comes out
So I went do realteak downloaded latest available drivers that seems to be were release yesterday did same command and same error So I made only make and it went fine did then make clean modules and went fine so made make install, depmod -a and modprobe r8169 verify int was up and getting correct ip from router but I'm not able to access the internet or ping any IP address
Code: xxx@xxx-desktop:~$ uname -a Linux xxx-desktop 2.6.28-18-generic #60-Ubuntu SMP Fri Mar 12 04:40:52 UTC 2010 i686 GNU/Linux xxx@xxx-desktop:~$
I have same problem with *.bin files.When I try to install software from *.bin file I see error:
Code: [andrew@notebook Programming]$ ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin bash: ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin: Access denied [andrew@notebook Programming]$ When I run command ls -la I see this:
Code: [andrew@notebook Programming]$ ls -la installbuilder-qt-professional-6.3.0-linux-x64-installer.bin -rwxrwxrwx. 1 andrew andrew 82624164 Апр 4 16:39 installbuilder-qt-professional-6.3.0-linux-x64-installer.bin [andrew@notebook Programming]$ This error exist if I try to install this application with root access. What I mast do for fix this error?
P.S. I have Fedora 12 x86_64 on my notebook ASUS M51Sn.
I have FC6 system with kernel 22.214.171.124-72.fc6 When I rebooted my system, I got error message "unable to access resume device (LABEL=SWAP-sda8) then it went to fsck automatically to all the partition and then stop (failed)
i was trying to format one drive, accidentally formated another, told the format process to stop, and i'm unable to read the folders or files in the drive. i see some greek, odd symbols... But cant open the folders.
It is saying to make sure there is enough room in the tmp folder, so I cleaned out the entire tmp folder but the same error is still happening. Is there a way to make the tmp folder bigger? Or perhaps extract the temporary files to a different folder? Or maybe the size if the tmp folder is not even the problem?
ok so i ran into a problem, im using web min to access my server, and im setting up postfix and, dovecot first problem is i want to be able to access my email account from a web page, with log in, so my question is how can i do that?
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
# Samba config file created using SWAT # from UNKNOWN (>) # Date: 2009/06/12 14:15:15
I've created a new user for a SSH tunnel only.After login I can access all directories because permissions is set for "Others" to "Access files".Now my question: Is this normal that permissions for Folder access for "Others" is always set to "Access files"?I don't want my SSH tunnel user accessing the directories.
I changed to wubi last night, i decided to go that way cause i was informed it was a safe way to try giving it a try for linux and ubuntu without any special effort needed to be payed and easily deleted if i am not pleased.Thankfully i am pretty satisfied with the results, i pretty much dealt with most of the issues i have faced so far successfully and i am running it ok beside one important thing.See i am using my laptop, which has a hdd of 250GB.On my Vista there are 2 different hdd C+E by default, they separated my hdd.So while i have windows on C and E is pretty much used for my additional data(see movies, music etc) when i installed wubi i installed it on E, thought it would be better and it had more space.
Now though, while i can access threw ubuntu all my files that were located on C(vista) i cant access any of the E ones, and search file dont helps either.The "vista hdd" as ubuntu describes it, its a 250 gb disk on computer, which means it should contain both of the vista disks.But sadly thats not the case.i cant seem to be able to find them anywhere.
the permissions for my home directory were accidentally changed from 'access files' to 'create and delete files', and I changed them back, but ever since then I am not able to change any preferences/settings at all. power management, themes, panels, emerald, anything. my user account is supposed to be the administrator, and all the user privliges are checked. how to get control of my computer back?
Im having a serious issue with booting ubuntu 10.04, the issue being it wont boot up at all, after working so well for so long (i suspect some recent dodgy system updates are responsible) so I decided to just reinstall ubuntu from scratch again but wanted to retrieve some important files from my root device. So I am running the live desktop and I can see my previous filesystems under places but cannot mount or open my original root device where the files I want to recover are located, I receive this error msg:"Unable to mount 77 GB Filesystem.
I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
I am on Ubuntu Lucid (updated till date). I am using Kernel Linux 2.6.32-24-generic Recently I am not being able to run Cheese (webcam tool). When run it is crashing. Upon starting it from prompt I noticed the following error : libv4lconvert: Error decompressing JPEG: fill_nbits error: need 2 more bits The program 'cheese' received an X Window System error. This probably reflects a bug in the program. The error was 'BadMatch (invalid parameter attributes)'.
I checked in Skype and there the webcam is working fine. I tried with Camorama but that always gives an error "Could not connect to /dev/video0, please check connections."
not sure what happened, yesterday i installed the new kernel and played around a bit by uninstalling some older kernels. Everything was fine but now i cant boot into ubuntu any more. I have a Dual boot and Grub let me boot into windows. for linux grub gave error 17 (if i remember correctly).o i popped in the LiveCD and tryed gparted to check for errors (nothing changed). I tried rewriting grub from the live cd and that made matters worse.
running Ubuntu 10.10 and mozilla and seamonkey... Tried to access a website: [URL] and got the error: The page cannot be displayed You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed. Please try the following: Contact the Web site administrator if you believe this directory should allow execute access. HTTP Error 403.1 - Forbidden: Execute access is denied. Internet Information Services (IIS)
when i go to tty 1 (ctrl alt f1)I am unable to accers the cli.it says.ubuntu 9.10 directive 4 tty1 directive 4 login: after i enter my username it asks for a password, i enter my password and after a few seconds it says, login incorrect and goes back to the start, what am i doing wrong.
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, email@example.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :