I've been an Ubuntu 10.04 64 bit user for one year. My Ubuntu distro is installed on an ext2 file system. Occasionally, I experience disk checks during boot without any system freeze or power loss.Sometimes, once reboot, the system works fine but Evolution Mail requests a new account, as if it was used for the very first time.Does anyone know how to fix this problem?
View 1 RepliesI woke up this morning to a message saying I have low disk space in /home. My /home partition is 150 GB, but I had only 4 kB left. I promptly rebooted, which helped, but I still only have 40 GB available. Now, I use only 26 GB, so where the rest is, I don't know. In the disk usage analyzer, a lot of the space was not accounted for, as shown in the image.
Here is the output from df -h and du
simen@simen-laptop:~$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 55G 8.0G 45G 16% /
none 2.0G 368K 2.0G 1% /dev
[Code].....
I checked out .gvfs and it's just a CD I have playing. I really don't know what's going on.
I was struggling frantically this morning for about 5 minutes after I booted up my computer, and wondering why it couldn't connect to the internet. After I figured out that the automatic wired network "Auto eth0" was gone from the network manager, it was easy to manually add it back. But why did it disappear in the first place?
View 3 Replies View RelatedIve been searching half the internet for a solution for a strange problem im having with a server (CentOS 5.2 Final). For no apparent reason, the server will just be powered off.I've looked in the dmesg log and /var/log/messages file, but that doesnt show anything, except the "syslogd 1.4.1: restart." message after booting it up again, and hours in advance of the crash a "suhosin" alert message.
View 9 Replies View RelatedI have just installed (after a series of crashes during the install) Fedora 15. I also have Ubuntu Natty installed and use it primarily but I wanted to reach out and try new distros.I've wanted to try Fedora and finally got enough nerve to try. Installing it crashed for no apparent reason several times.ehow it installed and booted right to Fedora.However, when finally figuring out how to run the updates, I began to have the same problem.(Someone elsewhere suggested trying to update through command line--which I did finally though I had a few crashes doing this).
Now I am logging in and then it will just inadvertently crash. I could be in firefox, or using terminal, etc. There doesn't seem to be much rhyme or reason to why this is happening and I feel frustrated. I really want to test out Fedora (it looks so nice!) but can't manage to stay afloat more than a few minutes. I might also mention that this does not happen in Ubuntu at all so I can't account for the issues. I have much to learn but I feel a bit intimidated by Fedora because it's so new to me.
Network stopped working about a month ago. I installed ubuntu again, and network worked fine, and I turned off updates to keep things stable. Now network stopped working again. No changes had been made to it.I put in the ubuntu install cd, and network works fine off of it. I did not reinstall again. ifconfig shows eth0 with correct ip address, but 0 RX/TX packets.
Cant ping anything from it, and cant ping to it from other computers.I'd really rather not reinstall yet again, any ideas on how I should go about diagnosing this problem?Ubuntu 2.6.35-28-generic-pae #49-Ubuntu SMP Tue Mar 1 14:58:06 UTC 2011 i686 GNU/Linux
my trackball mouse just freezes for no apparent reason about every 15 minutes
View 2 Replies View RelatedI just want to see if anyone else is having problems connecting to networks, wifi or wired. For some reason, I can see both wired and wireless networks available but when I try to connect, it times out. I updated a couple of days ago and suddenly started having problems today. Anyone else having the same problem?I have only tried the router and repeater I have to connect to. My other computers are working just fine. One is actually running as a Debian server with no GUI (which I do not update as often). The other is a Mac.
View 2 Replies View RelatedThese days I see the disk check that is popping up when my Ubuntu is booting up quite frequently. It says 'press C to cancel' but C (or Shift C or CTRL C or CTRL ALT C) does not have any effect. Pressing CTRL+ALT+DELETE reboots but again ends up in the vicious loop of disk check. How to bypass it? When I need to critically enter the desktop for an urgent pressing info waiting for 20 to 25 minutes disk check is kind of difficult.
View 6 Replies View RelatedSince upgrading (fresh install) to Lucid, I've been having to go through disk checks about once or twice a week on boot. I'm not sure why Lucid thinks it needs to check my disk so often. I looked into it a bit, and found a command that was supposed to stop disk checks happening so often.
Code: sudo tune2fs -i 2w `mount | awk '$3 == "/" {print $1}'` is supposed to set it to 2 weeks. I used "/home" too as I have home on a separate partition and didn't want that to be checked too. All was fine until I booted up to find another disk check today. It can sometimes take over half an hour to finish and C to cancel doesn't always work either.
I always shutdown cleanly, unless Ubuntu completely locks up, which happens maybe once every six months (although it did happen yesterday, but I have rebooted it a few times since then with no checks happening until just now). Is there a way to just disable checks completely? I wouldn't mind running them manually every now and then, I just don't want to do it as often as Lucid does.
Ubuntu 10.10 does not appear to have an indication of progress when the system checks HDs on start up. In previous versions - at least back to 8 - I think there was either a
progress bar or % reading to give an indication of progress of the scan / check .Is it possible to switch this back on in 10.10?Also how do you control the frequency of disk checks on start up?
I have some large volumes that I don't want to automatically be e2fsck'd when I reboot the server. Is it safe to change maximum mount count to -1 and check interval to 0 while a volume is mounted, or will that cause problems to the file system?
View 2 Replies View RelatedEver since my upgrade from 9.10 to 10.4, every time I reboot the system it does a full disk check. /var/log/boot.log tells me that fsck thinks that the file systems contain errors or that it wasn't cleanly unmounted. And yet, it doesn't seem to actually find errors, and a clean reboot starts another check (again with it thinking something is dirty). I dual-boot with Windows, and reboot from there with the same problem.Again, all of this is new with 10.4 and was not happening with 9.10.Is there a way to find out when/how/why the disks are not being unmounted cleanly?
View 4 Replies View RelatedI am having dual boot system Opensuse 11.1 and Windows vista. I have allotted about 5 GB space to home partition. Now sometimes I copy/move files from Windows partitions to /home, this is easily done. But when I restart the computer, It hangs and KDE is not loaded giving reason that disk is out of space. I have to work on commandline and delete some files from /home to free some space,only then I can restart the computer normally. This is very annoying.When I copy/move files then Opensuse should immediately give me a warning.It seems nonsense to not start kde.
View 6 Replies View RelatedI want the e2fsck check the filesystem on
every 5th boot.
How to diasable filesystem checks on boot?
View 9 Replies View RelatedOn a Sun Ultra10 333MHz, 512M, 9gB HDD. Booting Fedora-9. Silo v1.4.14 into kernel 2.6.27 64bit (vmlinuz-2.6.27.12-78.2.9fc9.sparc64). This is a brand-new installation.Although it's running on a Sparc it makes v.litte difference so far as this bootprocess, teh way Linux runs, where everything is - is concerned. That's why I've cross posted this query here.Booting merrily, in the interactive startup section just past "Starting udev", "Setting hostname", at "Checking filesystems" I get:
/: clean, 155284/557056 files, 920932/2225412 blocks
fsck.ext2: Device or resource busy while trying to open /dev/sda
Filesystem mounted or opened exclusively by another program? [FAILED]
*** An error occured during the filesystem check
*** Dropping you to a shell, the system will reboot
*** when you leave the shell
*** Warning --SELinux is active
WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB
...
Device Boot Start End Blocks Id System
[code].....
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
There is a disk 500 gb, it is broken on /boot and on /root and on /dev/sda1 and /dev/sda2. Whether prompt it is possible to redistribute a disk without loss of data namely it is necessary to make/boot and two equivalent on disk volume.
View 3 Replies View Relatedhow to re-set the page numbers of a pdf file within evince (without modifiying the pdf file). The point is that I am reading an article, and I would like the set "page 1" as "page 43". modifying page numbers of a pdf file is a bit tricky. So, I want to avoid that. What I wanna do is to make evince "think" page 1 is page 43.
View 2 Replies View RelatedI installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
I have in my hand a CDROM with photos created by some greedy photographer. When I mount it I can see two files in there, two .exe executables about 7.7 MBs in size each. When I try to create an ISO of the cdrom, I get an IO error and only 16 MBs end up at the file.... so I would expect the photo files after the apparent EOF of the device (or whatever it's called in CDROM jargon).
Is there a way to get past this point so that I could run magicrescue on the rest of the CD so that i can get the rest of the files?
Or are there other handson hacky methods to get to that data?
I'm running Ubuntu 8.04. I've got sqlite3 installed, but I keep getting errors when trying trying to install pysqlite (2.4.1 or 2.5.1).
If I run $ python setup.py build things look like they're going ok for a while, but then I soon start getting errors:
There's a whole load more stuff, ending up with:
gcc -v tells me that gcc exists so I think that last error must be a red herring.
However, after searching the web and trying lots of things, I've not managed to build pysqlite.
In case it's relevant, setup.cfg contains the following (after attempts at various things having tried following up on some suggestions I found posted elsewhere):
I'm having trouble installing it on a "new" computer that I found at Goodwill for $60 with no operating system on it. When I go to edit the partitions, it won't let me do anything due to an apparent lack of a root filesystem. (I know this issue has been brought up and resolved in the past, but the usual solution (going into the validation.py file) isn't working for me, as there is no line in this one that says "if not root".)
View 9 Replies View RelatedIn an attempt to get wireless working on my dell Latitude e6400 under Fedora 13 (64bit)I have downloaded and installed rpm-fusion with the understanding that it contained the driver necessary (Broadcom_wl i think). though the package manager installed both packages just fine, they are not acknowledged by yum repolist wich yeilds the results:
[Code]....
Google only gives me references to ubuntuforums for GNOME-shell issues. Basically, when trying to compile a program that requires GTK+ and GLib, I get an error equal to this:
Code:
/usr/local/lib/libgio-2.0.so.0: undefined reference to `g_source_get_time'
/usr/local/lib/libgio-2.0.so.0: undefined reference to `g_source_set_dummy_callback'
/usr/local/lib/libgio-2.0.so.0: undefined reference to `g_main_context_invoke'
[Code]....
I'm very new to linux and running debian 4.0. On boot got an error:
I did a ghost image of drive before I do any more damage and when performing the ghost, ghost stated I need to run fsck. I created the image and noticed that a lot of folders were missing (bin, boot and others).
1. How do I run check disk from an boot disk?
2. Is there something else I should consider?
I have a firewall / proxy that has an extremely high load, but I can't figure out what's using it. No real cpu usage, the disks are sleeping except for a little log activity, it's on gigabit ethernet and not close to maxing out... Command link stuff runs fast, nothing seems slow, yet the load is sky-high. IME this kind of load is associated with a lot of disk I/O, but that's not the case here. What could be causing this, what else factors into the load?
uname -a:
Code:
Linux myfirewall.mydomain.com 2.6.8 #1 SMP Mon Oct 18 11:20:22 CDT 2004 i686 i686 i386 GNU/Linux
top:
Code:
07:55:43 up 1503 days, 17:13, 5 users, load average: 26.50, 26.33, 26.25
Tasks: 245 total, 2 running, 243 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.6% us, 1.1% sy, 0.0% ni, 95.0% id, 2.7% wa, 0.2% hi, 0.5% si
Mem: 3895508k total, 3582272k used, 313236k free, 207468k buffers
Swap: 2040244k total, 112664k used, 1927580k free, 1358744k cached