Poor old Paradox was fine (actually it was great!) in DOSEMU 1.4.0.1 (Feb 11, 2010) under Karmic, but refuses to start under Lucid. DOSEMU itself seems to be basically working ok. Paradox does fire up ok in DOSBOX, but that is not an ideal place for anything except games (no print etc). What might have changed? I'd really like to get this working again.
View 2 RepliesDosemu sound worked fine in ver. 9.10. Cannot get Dosemu sound to work under Lucid.
View 9 Replies View RelatedAll I am trying to do is gain access to the internet and install wine. Here's the problem. Ubuntu won't recognize any drivers or networks. And I do mean none. This is what I get when I try to find drivers. [URL]
In order to gain a wireless network card driver and go into the network configuration to enable the driver, I figured I'd install Wine so I can use my network card driver CD to install the driver for it. But here's the thing, I can't get Wine because I have no access to the internet. And to gain access to the internet, I need wine. How on earth do I go about getting either? I'm stuck in limbo right now.
Anyway im trying to do a simple thing pointed out in the thread title. Everything is set up, cups-pdf works, in dosemu.conf lpt1 command is "lpr" printer-timeout is 10... I "work" in an accounting agency that has a program written in clipper back in 1992. Apparently some prints from this program produce text/plain and some produce application/octet-stream. text/plain is printed. The later is always aborted. I have uncommented the lines in mime.types and mime.convs. Which are located in /usr/share/cups/mime.
View 2 Replies View RelatedI've been running an old DOS app that reads and writes the parallel port bits to do a control task. Its worked great running on Ubuntu 6.06 but I can't get the version on 10.04 to read and write the actual hardware. I can't find what is missing from the configuration, as I recall all I did on 6.06 was edit /etc/dosemu/dosemu.conf to uncomment the line:
$_ports = $_ports, " device /dev/lp0 range 0x378 0x37a" in the "Direct Hardware access" section and start the xdosemu session as root. The process runs in the background and has "just worked" for years. This has got me stuck as the last step of migrating from 6.06 to 10.04 -- everything except this, postfix, samba, etc. couldn't have been easier, but I'm stuck now
Yes the new motherboard parallel port is set for 0x378 and it shows in /proc/ioports. I guess it could be defective, but the software reads back the values it writes and thinks its working, its just none of the outputs change and changes on the inputs are not read so the code is stuck waiting for the initial response to its first output.
I am trying to run dosemu in Centos 5.3 for the first time. I am getting the following error:
./dosemu: symbol lookup error: /home/vmishra/mydos/dosemu/bin/libplugin_X.so: undefined symbol: XShmQueryVersion
Further, when i launch xdosemu then I get the following error:
./xdosemu
Segmentation fault
I have installed Linux 2.6 kernel RHEL 5.3 server edition, Upon we installed DOSEMU 1.4.We are unable to run the dos graphical applictions over dosemu. One sample DOS EXE for drawing a circle using Graphics library routines in C fails to start and displays the following errorBGI Error: Graphics not initialized (use 'initgraph')Please let us know any dosemu configuration setting to tweaked to run the DOS graphical application
View 1 Replies View RelatedUbuntu 10.04 how stable are the lucid-proposed and lucid-backports options in the software sources settings?
View 4 Replies View RelatedWhat's the procedure for updating from Lucid Beta 2 to Lucid LTS? Is it just "apt-get upgrade"? Or would I be better off with a clean install?
View 2 Replies View RelatedI recently upgraded from Karmic to Lucid via the Update Manager. I would like to upgrade further by switching from 32 Bit to 64 Bit. I downloaded the Lucid 64 Bit ISO and wrote an install disk. When I reboot the computer with the install disk nothing happens.
View 2 Replies View RelatedI recently installed Ubuntu 10 and when checking the version using system|about it says:
Code:
You are using Ubuntu 10.10 - the Maverick Meerkat - released in October 2010 and supported until April 2012. Now, I run some shellscripts and they check the distro. lucid-wx is not in supported versions but lucid is. Where can I change the lucid-wx to lucid?
Is it somewhere in a textfile or so? I cannot find it in /etc/issues or using man -n of man -a or so.
Also, it is not mentioned in /etc/lsb-release.
I just tried to log into my Ubuntu Lucid machine, and I get the login prompt, but when I try to log in, the screen goes black for a few seconds and then goes right back to the login screen and I get a warning about my Gnome power manager defaults not being set correctly.
View 1 Replies View RelatedI've burned iso CDs for 8.10, 9.04, 9.10, Linux Mint 5, 6, 7 with Brasero. In addition I've burned music CDs with Brasero. It has worked well for me. But now I can't burn a 10.04 iso CD. I REALLY want to get a CD burned so I can install Lucid Lynx.
don't suggest I try kb3, Gnomebaker, or some other burner.. Brasero which always worked before.
I had ordered for a Ubuntu 10.04 CD on 27th. It's still not approved...can any of you say why.... I have received 3cds from ubuntu previously by ordering. It takes about 1-2 days to get the approval....why is it so late this time?
View 9 Replies View RelatedI want to make an iso for some friends [and maybe friends of friends] that aren't all that tech savvy, so I want to change a few things to the original Lucid iso. First, I want the option to install Lucid out of the boot menu [but the other options should ideally stay]. Second, I want to include the ubuntu-restricted-extras so they can immediately try it out and see that it also plays video/audio etc.
View 9 Replies View RelatedI just upgraded from 9.10 to 10.04 this morning and half of my RAM is not recognized!
Specs: Pentium 4 2x 2.80GHz, 1001.6 MiB RAM (should be 2x this), Ubuntu 10.04.
I have just updated to Lucid, and all seemed to go well except for one issue. etherape won't start when I run it as root. When I start it with a normal user, it starts OK, but I cannot access eth0 which I want to monitor. From the command line: peter@trinity:~$ sudo etherape
[Code]....
I cannot shut down Lucid on the roper way, only from terminal with "sudo poweroff".
View 1 Replies View RelatedAbout two weeks ago I upgraded from Karmic to Lucid. The upgrade went fine, everything works wonderfull, except maybe for Wine but am still figuring that out.
What I find a bit strange is that on the boot-up screen (where I get the choice between the different OS's on my two hard-drives) I still see Karmic listed on the partition where I upgraded (see attachment: on /dev/sda1).
When I boot-up, I first get this message: Mounting: mounting none on /dev failed: no such device
This stays about 20 seconds on screen after which Lucid starts up and gives me the log-in screen.
Since today, I cannot start to X anymore. Grub loads, I let it start, then after a while screen goes black, stays black, puter not responding at all, screen goes to power save.
I can boot to safe console though but not start X there either.
So far I tried Memtest (no errors found) and apt-get update and upgrade. SafeX doesn't work.
I have an old laptop that I want to install Lucid Lynx on from a flash drive but when i try to do so all I get is a blank screen after I select the language and the option to install.
Intel Celeron M 1389 MHz
2 GB RAM
120 GB HDD
Intel i855GM chipset
I'm trying to install Sun's Java6 JRE since IcedTea isn't cutting it for me. Perhaps I'm going insane. If not, I've suddenly lost faith in my favourite distro. [URL]. Tells me that there aren't any Sun packages anymore.
sudo apt-get update
apt-cache search jre | grep sun gives nothing
apt-cache search java | grep sun:
sunflow - rendering system for photo-realistic image synthesis
sun-javadb-client - Java DB client
sun-javadb-common - Java DB common files
sun-javadb-core - Java DB core
sun-javadb-demo - Java DB demo
sun-javadb-doc - Java DB documentation
sun-javadb-javadoc - Java DB javadoc
cat /etc/apt/sources.list: .....
I installed Tint2, and the icons that normally appear in Gnome-panel's Indicator-applet do not appear in the system tray of Tint2. I mean volume control, battery, etc.
View 2 Replies View RelatedApparently is not supported on lucid for some reason. I went and installed a jaunty package i downloaded from launchpad. It installed ok, including dependencies and all, but it's not working. I went and check the config file and notice that it was not even created.
I want this small app really badly. Would anyone help me to fix a workaround or point me the direction to a working package?
I have been struggling to get into Grub during boot. No matter how many times I reboot and hit the "esc" key.. runs right past Grub and into the splash screen. Every blue moon it will catch the esc and I get the grub menu. I have fixed my original issue by reinstalling the ATI support, but would like to know of any similar issues with Grub.
View 4 Replies View RelatedAm attempting to upgrade from Breezy to Lucid but not without a lot of problems The current brick wall is I cannot run a PHP file called from an HTM script.First I can run localhost/phpmyadmin and can access/modify my MySQL database.Second I can run localhost/test.php and see my PHP setup.Third I can run a local swf file successfully but it does fail when attempting to access processsData.php with "Can't access network" which was almost always caused by a PHP syntax error.I have run the php script through a PHP5 syntax checker with no error.Fourth I can run an htm script
Code:
<form action="processData.php" method="post">
<p>
[code]....
I am rather irritated right now. I managed to install kde 4.5rc alongside gnome 2.30. And the 1st impression is barely ok. It seems stable and fast, but because wi-fi doesn't work for me, it's really limited in where it can go. Considering I'm typing this logged in thru gnome on the exact same system, connected to the wi-fi network kde refused to connect to, it's rather baffling. Update: Used networkmanager-gnome to get me connectd in before I login since network doesn't use security (even gnome doesn't play well with that.
KDE issues (some from 4.4.2 and still in 4.4.92). Plasma:
1.Tooltips aren't persistent, they shy away after a few seconds. Also they should update with data they're representing (yes system monitor, I'm looking at you);
2.Allow setting of colours for graphs e.g. ram monitor, cpu monitor. Was there but now gone;
3.A more convenient way to exit the plasma dashboard (right click on background perhaps?);
4.Individual wallpapers per desktop; (again, there before in 3.5)
5.Panel auto-hide show delay still not adjustable; choice for fade-in animation;
Kwin:
1.The present windows effect wastes a lot of space under 'natural' without 'presenting' the windows optimally; other setting (fixed & flexible grid) make programs like audacious look utterly horrible; the placement algorithm needs to be sorted;
2.Oxygen menus have too much border, give impression of bloat;
3.Kwin compositing freezes everytime I change decoration, style, font, etc. Have to use key shortcut to disable then re-enable. This is somehow connected to my system using more swap as time goes on, while mem usage remains ~40% (of 2gig)
Dolphin:
1.Ability to show basic media file metadata without need for nepomuk (as was possible in konqueror in 3.5.x), e.g resolution of jpeg/png/bmp images, id3 info from mp3/ogg/wma files; pdf [this marked as done in the feature plan, yet to see it)
2.More columns for sorting in details view (windows explorer excels in this). Above point will be needed before this is possible;
Amarok (2.3.1):
1.Still no proper use of album artist tag (for compilation albums and such) and/or proper detection of various artists listed in the 'artist' tag;
2.All embedded album art is useless;
3.Album art isn't shown prominently in the collection browser (22px crap doesn't count, the art itself is >300px);
4.Can't queue files from collection. Can queue from playlist, albums applet but not collection. Why?;
It is a stable pre-release software but stable can only get us so far. The basic features users have clamored for aren't being provided, resulting in my playing music with banshee and viewing my pics with geeqie.
Anyone know how to run memtest86+ from the Ubuntu 10.04 install CD without having to install Ubuntu? It used to be a menu option at boot, but now you just get the option to install or try Ubuntu. I want to test the RAM on an older system before I install.
View 9 Replies View RelatedI'm running an AMD 64 system with 4 gigs of ram, and only have 32 bit windows. Since the update to Lucid I have yet to have it work properly. Every time I've tried to install it it ether over wrights my boot file, and I lose windows (a few programs I have to have in there)when I try a standard install or it fails to boot when I do the Wubi install. Is there any where I can re download the previous 46 bit version? I seam to have lost the ISO.
View 3 Replies View RelatedI have a fresh install of 64bit Ubuntu Lucid and I can not install a printer in the manner that I have been doing for some years now. I would like to click on System --> Administration --> Printing and then Add but it is grayed out and the applet has not connected to the Cups Server. This is the long term service edition and it would seem that printing is broken: at least at this location.
View 2 Replies View Related