I want to connect OpenVPN to office network. I receive mail where is openswan configuration file, but I want to OpenVPN
conn CONNECTION-NAME
disablearrivalcheck=no
type=tunnel
left=IP MY SERVER
right=IP OFFICE SERVER
rightsubnet=LOCAL IP SERVER IN OFFICE/32
[Code]....
Im running Ubuntu server 10.04 lts
Im trying to get postfix to receive mail from one address and pipe it to a PHP file for a help desk software called Trellis Desk.
They recommended that I use Cpanel but its not free and my boss is not willing to pay for it. I need a free solution.
I know my way around Linux but Im no professional
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
I have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
From where I can download Openswan for my RHEL 5. Please if possible, give me installation and configuration manual.
View 3 Replies View RelatedI am connected to the internet with a Rogers Rocket Stick, when I want to check my mail in Evolution the "send and receive" tab is not highlighted. It was working yesterday when I was connected through wireless why is that and how do I fix it ?
I installed Ubunto remix on a Netbook but I can not connect my Laptop with ubuntu to my Netbook with ubuntu, both these computers are connected on the network, it asked for the password to be able to connect on both computers but I cant get the two to communicate with each other .... yesterday when I still had windows xp on my Netbook I had no problem connecting the two computers ...
i know whether openswan-2.4.8 can install on centos 5.3.becoz i download openswan-2.4.8.tar.gz and after some changes in the configuration file, i verify ipsec..it runs all ok..then i do service ipsec start.then lot of errors happen.. is it possible to clear the errors..is any body succeeded in it.my distro version 2.6.18-128.el5.i am plan to setup an openswan vpn with certificate to tunnel a windows XP client.
View 1 Replies View RelatedI can not receive file in yahoo service with pidgin !
View 3 Replies View Relatedi want to setup a vpn for that i install openswan and l2ptd. both are installed from tar balls. after that i configure /etc/l2tp/l2tp.conf and /etc/ppp/options.l2tpd and /etc/ppp/chap-secrets files.what can i do to start l2tpd service
View 1 Replies View RelatedI was running Ubuntu 9.04, no problems. I did a new installation of 10.04 and could not send or receive mail (Thunderbird). Both would time out. tried two other mail programs to see if Thunderbird was the problem, but they did the same.So I did dual boot installation, with 9.04 and 10.04. The same: mail OK in 9.04 but not in 0.04. So that seemed to eliminate everything as a problem outside of my computer.One night I remembered that ipv6 could be a cause, and toggled it in Thunderbird. It has been an "almost". I can now receive but not send.For example, the bottom bar will say: "Connecting to smtp.edicionescc.com" and after a while time out.I can ping smtp.edicionescc.com with no problem
Jos鼯textarea></p>
<input type='hidden' name='ID[5]' value='74701' />
<input type='hidden' name='URL[5]' value='http://www.linuxquestions.org/questions/linux-
[code]...
so I'm really new to using Linux, and I searched the forums, but most people seem to have trouble sending mail, not receiving it. When I send mail from the CLI, it gets delivered fine (from travis@travishoward.net) But when I try to reply or mail to the server, I get this message back:
Code:
----- The following addresses had permanent fatal errors ----- <travis@travishoward.net>
(reason: 554 5.7.1 <travis@travishoward.net>: Relay access denied)
[code]...
I am new to this forum and essentially new to Linux, (I used unix between 95 and 99) but the cobwebs are still very thick. I installed Ubuntu 10.10 on an extra PC. I have it pretty much as I would like it now, except for email. I am trying to use Evolution and it is sending mail fine. I cannot receive email. I believe this is because my DSL provider, Windstream.net, says
they support only Outlook and Windows Live mail. I could be way off base, but it seems that it should be able to work. When I mentioned Linux, it basically shutdown their help. I have email through them on Windows 7 on another PC. Is there some way around this so I can use the email address xxxx@windstream.net ? Oh, they use pop3 and require authentication, which is what I have configured. I do not get any error messages, just never get the email. Perhaps another email package?
I have a problem with the mailserver that i have. I uses a tutorial to install a Fedora 13 ISPconfig server. But the problem that i have is that i can't receive mail at the user that i made.
Here is my postconf :
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
body_checks = regexp:/etc/postfix/body_checks
broken_sasl_auth_clients = yes
[Code]....
My mail server stop receiving mail from the outside world. I need to ask you about the required logs, that I need to perform.
My systems is:
Code:
Linux Centos 5.4
Postfix
Courier-IMAP
I have some simple practical requirement to receive a mail if someone logged to my system.
I think we can see who are logged into our system using the command who or finger or w.
But I want to get a mail as soon as a guy logged into my system.
Hello, I've installed OpenSwan with xl2tpd on my server, and set it up for roadwarriors connecting using certificates.
My server is Debian 5.0.8, I am running xl2tpd 1.2.0, and Openswan IPsec 2.4.12, my clients are all Windows, and I am testing my setup on a Windows 7 client.
I have no problem connecting to the server, but after some time the connection drops. I removed the idle option from the ppp config but it does not make any difference.
Even when I create constant traffic with ping -t the connection drops also.
I have no problems reconnecting right away.
I have been hacking at this for a couple of days, reading every post I can find, but I have not found a solution to my problem.
Here are my configs and logs:
CONFIG FILES:
/etc/ppp/option.l2tpd
-----------------------------
ms-dns 10.248.75.4
ms-wins 10.248.75.4
asyncmap 0
auth
crtscts
[Code]....
I have Linux mail server, It always encounter this problem, when i shut down or restart the server. You cannot receive mail but you can send..i use the following services:
iptables -F
service iptables restart
service sendmail restart
[code]...
I can't seem to track down. In Evolution, I am unable to receive mail. I tried every configuration method I know and still no success. I'm even tried using a hotmail and verizon account settings with no luck.
View 1 Replies View RelatedI've set up both Postfix and Dovecot on my server. I can currently send mail via Outlook to Postfix over Port 587 (rather than Port 25), and receive mail from Dovecot on Outlook. However, the only mails I am able to receive are those originated from within the server itself. If I attempt to send an e-mail to the address my Outlook listens to, the mail will never reach my Outlook. In other words, no one on the Internet is able to send mail to me.
Can someone tell me:
1) If setting Postfix to listen over Port 587 for my Outlook to send mail outwards is preventing me to have Postfix to listen to mails coming from the Internet? Would I have to turn on both Ports 25 and 587 in /etc/postfix/master.cf?
2) I have configured my Postfix to use saslauthd by authenticating those who are on /etc/passwd. This means I can enter my Linux account details into Outlook in order to connect and download messages. However, does this mean other MTA servers on the Internet who doesn't know my account details are unable to authenticate with my Postfix server and send mails to it?
I am using postfix in conjunction with the ispCP Control Panel. Here's some of the recent entries in maillog, when I try to send an email from my gmail address to an email address on this server (I underlined the email addresses).
Code:
2010-06-26T17:57:43.581654-04:00 li136-183 postfix/smtpd[30721]: fatal: No server certs available. TLS can't be enabled
2010-06-26T17:57:43.838633-04:00 li136-183 postfix/smtpd[30710]: warning: connect to 127.0.0.1:12525: Connection refused
2010-06-26T17:57:43.838677-04:00 li136-183 postfix/smtpd[30710]: warning: problem talking to server 127.0.0.1:12525: Connection refused .....
My server already installed and works well, but I can't send or receive mail with Squirrelmail, the error that appears is: Server replied: 67 Can not execute command '/ usr / sbin / sendmail-t-i-fteste@gabinetedeengenharia.com '.
View 5 Replies View RelatedWhen implement openswan in redhat5 and start ipsec appear this problem
whack: Pluto is not running (no "/var/run/pluto/pluto.ctl")
what this file contain
and when run this command
ipsec verify
Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path [OK]
Linux Openswan U2.4.10/K2.6.18-8.el5 (netkey)
Checking for IPsec support in kernel [OK]
Testing against enforced SElinux mode [FAILED]
SElinux is running in 'enforced' mode. Since no working SElinux
policies exist for Openswan, SElinux should be disabled.
echo "0" > /selinux/enforce (or edit /etc/sysconfig/selinux)
NETKEY detected, testing for disabled ICMP send_redirects [FAILED]
Please disable /proc/sys/net/ipv4/conf/*/send_redirects
or NETKEY will cause the sending of bogus ICMP redirects!
NETKEY detected, testing for disabled ICMP accept_redirects [FAILED]
Please disable /proc/sys/net/ipv4/conf/*/accept_redirects
or NETKEY will accept bogus ICMP redirects!
Checking for RSA private key (/etc/ipsec.secrets) [DISABLED]
ipsec showhostkey: file `/etc/ipsec.secrets' does not exist
Checking that pluto is running [FAILED]
whack: Pluto is not running (no "/var/run/pluto/pluto.ctl")
Two or more interfaces found, checking IP forwarding [FAILED]
whack: Pluto is not running (no "/var/run/pluto/pluto.ctl")
Checking NAT and MASQUERADEing [OK]
Checking for 'ip' command [OK]
Checking for 'iptables' command [OK]
Every time I try to send a message with SquirrelMail, I get:
Code:
Message not sent. Server replied: Syntax error in parameters or arguments 501 5.1.7 Bad sender address syntax
I do not know why I could send email outside but not receive. I use relay to my ISP that port 25 is blocked by my ISP. What can I doing with configuration when it should be works to receive mail? Okay, I have sent a test e-mail between localhost and it works. I can send from mailserver to my gmail without problem. So why I cannot receive email from gmail?
View 2 Replies View RelatedSince Feb 23-24, Evolution (2.28.3) no longer receives any e-mail. When I click send/receive, the usual dialog appears, but finishes real quick, with no messages downloaded. I know there are messages, and Evolution is in online mode. I have tried removing the "remember password" option on all accounts, but evo won't ask for a new password when I try to receive mail. I have tried to delete all accounts from within evolution, and create new ones, but no luck. All accounts are pop servers, and I have also tried turning pop3 extensions off.
Has anyone got any suggestions as to what is wrong here? I'll provide some log files, but will have to clean up usernames, servers etc.
As per OpenNMS wiki documents, I configured everything for email notification of alarms. I am able to view notification under notifications, but I haven�t seen any mail alerts forwarded to recipient mail ID. Below are configuration files. Please review and suggest the required settings/actions. SMTP Server Details: SMTP Relay Server, OS: Linux
i also made the configuartion by opennms configuration material in opennms.org i edit the following conf file
1. javamail-configuration.properties file
[code]....
I recently purchased a domain and I have setup what I believe are correct dns records from the domain companies control panel. I have the domain pointing to my server and that's working fine. I also have an MX record for my domain. Now, I can send emails from my email account just fine however I cannot receive any emails coming in to my account. Heres an example:
[dalton@int-interactive mail]$ echo "hello world" | sendmail -v dalton@int-interactive.com
dalton@int-interactive.com... Connecting to [127.0.0.1] via relay...
220 int-interactive.com ESMTP Sendmail 8.13.8/8.13.8; Sun, 21 Aug 2011 14:45:16 -0400
[code]...
i need to build an ipsec vpn between a linux debian server and a zyxel prestige, The debian server got 2 ethernets connection one for the internal network and the other one is public with a public ip adress.I need to know what i need for the build the tunnel, could you please let me know what i need? Let me explain i have only to configure openswan or i have to configure the iptables or somethings else too? I found this one do you think this would be work for me? [URL]..Is debian a right distro or should i try someone else?
View 2 Replies View RelatedSeems quite a lot out there are finding it simple enough getting Thunderbird/Davmail to work, yet I've been at it for days now and still no luck. I've finally given up altogether with Evolution last week, as it seems from weeks of reading and trying, there just isn't a solution for it to work with Exchange Server mail. Yes I tried brutus and its web sites are down so to get additions such as Brutus Keyring is impossible. (its all a long story for another day)Evolution is now uninstalled and in the bin.So now Im into the 5th day trying with Davmail and Thunderbird to get emails from my company mail exchange server.I am sure Im going to have better luck with Thunderbird from what Ive read so far, but it still eludes me how to set it up with Devmail and the information Ive found so far is not very clear. I am sure I am just missing the most simplest step somewhere along the line.
Can someone please post a detailed instruction on how to configure both Thunderbird and Devmail to work together and also how to test if Davmails is working?I can easily access my company emails via OWA with URl... from my home internet, so no issue there.From the efforts of trying to get Evol to work where it came up with the error. "Evolution connector is not compatible with Exchange 5.5", I assume our company server is running an MS exchange server version 2003 or older.