General :: Controlling Fan Speed On Compaq Under Ubuntu?
Apr 25, 2010
I have a Compaq Presario R4000 running Ubuntu Linux 9.10 karmic. The system runs very hot and one of the fans is wither never running or always running at the slowest speed. For a while I thought the fan was dead but I just updated the BIOS (Phoenix BIOS) and during the update, that fan suddenly kicked in at full speed! How can I get that fan to spin up during normal usage? I have tried sensors-detect but all it found was k8temp, no fans... (SpeedFan under windows found no fans either)
View 1 Replies
ADVERTISEMENT
Oct 20, 2010
Out of curiosity, how can you control the fan speed?
View 9 Replies
View Related
Nov 10, 2010
is there any app that lets me control fan speed?
View 1 Replies
View Related
Mar 13, 2011
Running 10.04 LTS, wondering if there was a way to control fan speed using the open source radeon driver with a HD5770, it's currently far too loud even when not really being in use.
View 3 Replies
View Related
Aug 29, 2015
I have a Compaq 8710w and after upgrading to the latest Debian/testing (Linux version 4.1.0-1-amd64)the fan runs at full speed all the time. There seems to be something strange with the temperatures reported by temp4, it is stuck at 100 degrees.:
Code: Select allroot@...:~# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:    +16.0°C (crit = +105.0°C)
temp2:    +38.0°C (crit = +105.0°C)
temp3:    +22.6°C (crit = +110.0°C)
temp4:    +100.0°C (crit = +110.0°C)
temp5:    +37.0°C (crit = +110.0°C)
[code]...
I found this related problem: URL... . Note that here the problem is that the fan does not spin and that temp4 reports 0 degrees.
View 5 Replies
View Related
May 11, 2010
I installed Lucid Lynx a week ago and I have a problem with the notifications. The notifications that appear on the screen stay for a long time, about 10 seconds. How to control these notifications so that I can reduce the time?
View 1 Replies
View Related
Nov 7, 2010
Whenever I start up my laptop running Fedora 14, I notice that it says that it is failing to connect to my default wireless network since the wireless card is not activated. Since it appears that the wireless card is not activated until the NetworkManager service is started, is there anyway for me to set NetworkManager to start before this check is made? Boot message log is attached. [URL]
View 1 Replies
View Related
Oct 17, 2010
I've just installed Slackware 13.1 in two different laptops for first time. I have some strange internet browsing behaviour in one of the laptops. I've installed 2 internet browsers(firefox,opera) using the directions from Slackbuilds.org and there is also konqueror pre-installed. Moreover I installed Wicd network manager.
I can browse some pages e.g. ..... with firefox very slowly but NEVER facebook. I can browse almost any page, even facebook, with OPERA but very very slowly. The same goes with konqueror... Wicd shows that i am always connected with my WPA wireless network
Laptop details:
Quote:
Toshiba sattellite a100-209
//-----------------------------------------------
Processor Intel Celeron M 370 / 1.5 GHz
Databus-Speed 400 MHz
//-----------------------------------------------
Installed RAM 512 MB
Technology DDR2 SDRAM - 533 MHz
[code]....
View 7 Replies
View Related
Jul 20, 2010
I have trying to figure out for the past two weeks why the internal speakers are not working with Ubuntu 10.04.
Have gone as far as upgrade alsa but gosh...! However, if i use external speakers, the sounds play very well.
I like ubuntu and i would not like to go back to windows..
How to resolve the sound issues on ubuntu 10.04 with laptop compaq 610?
View 2 Replies
View Related
Jul 23, 2011
Ubuntu 64bit. The sound system works and plays noises correctly when I test the speakers in sound preferances. The internet BBCi player(Radio) plays sound correctly. Banshee & Rhythmbox try to play music files at double, or more, speed with no sound output. Spotify Linux version also tries to playback at double speed with no sound output. Media Player attempts to play music files at high speed. Media player plays the Video and audio tracks at high speed. VLC Will play the video at normal speed but with no audio.
View 1 Replies
View Related
Jun 10, 2011
i cant seem to get my mic to work i just installed ubuntu 11.04 on my copmaq
View 3 Replies
View Related
Dec 20, 2010
i both have the same problem, i'm trying to burn my images at 4 or 8 speed, but ubuntu 10.04 says that the hardware does not support that kind of speed and switch up to 16 speed and more. i know it can burn at low speeds, at least in windows, it is a bit strange that fast burning is okee, and slow not, what can i do to prevent this? i don't wanna burn to much errors on my discs
View 5 Replies
View Related
Sep 26, 2010
I am new to Linux, and have started using Ubuntu 9.10. everything seem to be in place except for the Web Cam. i think it is not being identified by my OS. i have tried Ekiga, but still of no use. i am using a Compaq Laptop with an inbuilt camera.
View 1 Replies
View Related
Dec 15, 2010
I have ubuntu 10.10 and I'd like to change to Fedora so I downloaded the iso image and burned it..... (To be sure, I burned the iso two times, on two cd's with two pc's) When I tried to install it it stucked before the installation begin, what should I do?
View 1 Replies
View Related
Feb 7, 2011
Does anyone have any thoughts on getting linux on a x86 Compaq N600c with only a floppy drive, and the USB and PXE options are out of queastion (already tried with Win XP), only option I figure I have is to find a downloadable version that will install from current OS (Win 98se, freeware Service Pack 2.0 patch), but does such a thing exist, and if so where can i find it, (must be GUI). For those of you scratching your head as to how i intend on getting the download to it since i don't have internet. infrared import from another computer that is my gf's and will kill me if i get any linux software on her comp.
View 10 Replies
View Related
Nov 14, 2009
I'm new to linux and have an old laptop did clean reinstall windows 98 but no updates, and now burnt iso image to cd on other pc and used it to try running puppy linux 3.01 on the compaq armada laptop (spec 56.0MB RAM, AMD-K6(tm)-III Processor used space 645MB free 3.80GB). I chose this older version as I think I'd read that this is more suitable for older slow computers.
I am interested in running linux fully without windows 98 or with it. Running from CD I have to select Xvesa I think as Xorg didn't seem to work. Tried partitioning but in GParted find myself unable to amend the size of partitions - got yellow exclamation mark next to the partitions. What I see is: greyed out unallocated 7.38MB, then /dev/hda1 yellow exclamation mark filesystem unknown 206.72MB, /dev/hda2 yellow exclamation fat32 4.45GB.
It does not allow resizing when I try. Associated with the yellow exclamation marks is the warning "unable to read the contents of this filesystem! Because of this some operations may be unavailable. I have done a defragment of C in windows already. (Also haven't been able to connect to internet on linnux with my wireless card.)
View 2 Replies
View Related
May 11, 2010
I installed Lucid Lynx a week ago and I have a problem with the notifications. The notifications that appear on the screen stay for a long time, about 10 seconds. How to control these notifications so that I can reduce the time?
View 1 Replies
View Related
Mar 22, 2010
I want to pick up an obviously unsolved problem. I have a Samsung Q210 Seven Notebook and recently installed Kubuntu. Everything works fine, as long as I put on my sunglasses when working with the notebook in the evening. Triggering the hotkeys shows an icon with a percentage counter that increases or decreases, depending on which function key I use. Although this looks really nifty, it gets boring after utilizing a few times. And, as you might already think, the brightness doesn't change here...
I found a hint telling to adjust the /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_backlight=vendor"
The only effect this has is that the nice percentage lowering/raising minigame doesn't work anymore
Also, nothing from the suggestions from the previous post work. This is really bad, since that way not only the user's eyes suffer, but also the energy consumption of the display is maximized.
how I can change brightness/backlight intensity
View 4 Replies
View Related
Mar 12, 2010
I have a Compaq R4000 laptop with 2GB of RAM, running Ubuntu Linux 9.10. It is randomly locking up on me, approximately once every two days. I have a second partition with Windows XP Home installed, and I have had the system lock up in XP as well, meaning I believe this is a hardware issue. I have run two passes of Memtest86+ with no errors.The system has a fan that has died, so I initially suspected overheating. However the system just locked up on me while I was in the middle of typing a script to warn me / shut down if the temperature was too high. When the lockup happened the temperature was 88°F, so I am now starting to believe that may not be the issue.When the system locks up, I cannot SSH in nor ping it. Nothing shows in syslog when I reboot. I have configured it to send syslog messages to a local server as well and no messages appear on that server when the lockup happens.
View 1 Replies
View Related
Feb 14, 2010
I have compaq presario v6307TU notebook, i am going to learn ethical hacking and i have ubuntu 9.10 and backtrack linux OS.
Do i need different drivers for my ubuntu n backtrack linux OS or there will be only one drivers required for 'linux'.
Anyways i am not able to find any drivers for my notebook for LINUX, i have asked HP for that but nothing gud happened they told that they dont have drivers for 3rd party operating systems.
My notebook uses Conextant HD audio and has intel 945 express family 128mb graphics, i ran ubuntu from the disk i have (but had not installed it yet) and tryed palying my .mp3,mpeg,mp4,avi files and nothing worked..obviously because i had not installed the audio-video drivers...causse i didnt had them...where to find them?
Also i wanted to kno that i have installed nfs most wanted on my xp, so will i be able to play it in linux?
View 6 Replies
View Related
Jun 12, 2009
is there a program or something to enable my presario 2100 to read a linksy's program disc? the disk says it should run automatically, but the comp keeps sending an error message that its either a multi-part drive? or its a zipfile and it cannot recognize.
View 1 Replies
View Related
Aug 29, 2010
How do i download & run Linux on my COMPAQ Evo N610c for FREE?
View 1 Replies
View Related
May 23, 2010
I have an old compaq presario 2100 (amd athlon) laptop that came with windows xp. it can't deal with xp any more so i put mandriva on it and let my mother in law use it for card games. now it won't even boot mandriva.
it says something about a 1720 SMART error. i ran the hdd test and it gave me a code: 1# imminent failure.
it will run mandriva off the install disk but I want to make this as easy as possible for my mother in law to play her games. I don't think she'd like to deal with all the steps involved with running it off the install disk. the problem with that is that the install wizard runs every time i turn it on.
will i be able to do something to the effect that my mother in law will be able to easily boot up and play her card games on the laptop?
View 1 Replies
View Related
Dec 13, 2010
I just recently did a clean install of 10.10. My controller works fine for games no issues there. I haven't done any sort of configuring in order to make my Logitech cordless rubmble pad 2 controller work as a mouse yet it is. It just started this morning when I booted up. I have found many threads on how to make your controller/joystick work as a mouse. But I have yet to find one on how to get it to quit doing so. Or at least how to toggle it on and off which would be better in my case as Ive found in the past 30 min that I like scrolling with the analog stick much better than pgup/dn or the mouse wheel. The main issue is that I have a 4/yo here that plays games all the time and he keeps opening random things when he plays. I also am looking into how to get virtual box to let windows xp detect my controller but I will post that later after I have done more research if I can't figure it out.
View 1 Replies
View Related
Apr 8, 2011
Gnome, 10.10 (likely not to upgrade to 11.04), HP-dv7t laptop, intel i7 processor.In my ongoing attempt to create a completely mouseless computing experience (and hopefully, one where I never have to leave the home row) I am currently trying to find a way to control the onscreen cursor with my keyboard.
I have found various solutions, but most of them have problems. The accessibility feature that comes with Ubuntu is (for some reason) not installed on my computer and I can't find the package, but other people who have tried the same thing have said that it is not worth the effort anyway, given that it has nonexistent customization.
This shift-numlock function doesn't work at all. Got info from this thread: ubuntuforums.org/showthread.php?t=926105. Gizmod is incredibly complex and doesn't seem to work all that well with my 64 bit hardware. I worked with it for a few hours. But, anyway, do you have any advice that has not already been posted in the other thread?
View 9 Replies
View Related
Oct 25, 2010
I have a USB joypad and I would like to use it to control the mouse on Ubuntu 10.10. Do you know any straightforward way of doing it?
View 2 Replies
View Related
Jan 24, 2010
I have been a website designer for sometime now and i was wondering about tring out some of the hardware world. (dont get me wrong im no n00b, i can build a pc from scratch) What is the best way to get started on Controlling Hardware? i mean controling a small electric motor to spin a wheel when a button is pressed on the computer or somthing like that? And can this be done with PHP so i wont have to worry about leaning another programming language? Is it very difficalt? Where should i start?
View 2 Replies
View Related
Jan 29, 2010
I've been looking for a way to use my laptop (running Ubuntu) to help service a remote laptop (running Windows XP). I've used TeamViewer and Cisco's VPN Client before, but TeamViewer is Windows only, and I don't want to pay for a Cisco system just to help maintain my friend's computer.
Ideally, I'm looking for something similar to the programs listed above, but I really just want to know if any of you have done this before, and if so, how?
View 4 Replies
View Related
Oct 3, 2010
I have done a standard install of Ubuntu 10.4 Desktop. All I have changed is to edit the smb.conf to set the correct workgroup. Everything is working fine, except that I am not able to connect to Ubuntu from my Windows 7 pc using Windows' built-in tool. That should work, shouldn't it? Do I need to edit more settings?
View 3 Replies
View Related
Dec 2, 2010
I have 2 distros installed right now and generally keep the main one and install and look at other distros.My question is this; Can I install a second distro and not let it take over my frub/boot menu and NOT let it control the boot menu? If so how would I do it? I always get confused when I install the second distro when it asks what to do,use / or boot as the option etc...
View 9 Replies
View Related
