Ubuntu :: Configure Grub To Add New Drive To List?
Oct 16, 2010I am going to install Windows on a newly installed hard drive.
What is the best way to configure grub so that I can add the new drive to the list?
I am going to install Windows on a newly installed hard drive.
What is the best way to configure grub so that I can add the new drive to the list?
I am developing a customization of ubuntu for my company, as we mirror ubuntu repositories it would be great that the distro's sources.list be configured for using our repos instead of ubuntu's official on install, without the need of me going PC by PC making such configuration myself... How could this be achieved? Is there documentation about it? I have only managed to find data on how to configure the sources.list after installation.
View 3 Replies View RelatedI've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
I had ubuntu 9.10. I installed windows 7 on partition C: that had windows vista before, and as usual the grub of my ubuntu was wiped out, I reinstalled the grub again and every thing became fine BUT now in the grub list there is vista, not windows 7, when i choose vista it says there is no device!? How to add win7 to the grub list.
View 2 Replies View Relatedmy computer have windows 7 and also a ubuntu in it (i started with version 10.04). i've just updated my ubuntu and i found that the list in the grub menu got longer by 2.and i feel its a long list....
so how do i shorten the list... i'll be ok if i just have the latest Linux and its recovery mode. than memtest86 and the other and last Windows 7... i dont need the old ubuntu in the list.... its redundant.... i have startup-manager installed but does not do what i wanted...
I'm using HP Pavilion dv2108tx I have ubuntu and Win7 dual boot. The problem is every time I change setting to the BIOS there will be a new list of ubuntu boot came up and now I scroll trough the whole list. Is there anyway to edit GURB boot list.
View 3 Replies View RelatedI have been using Ubuntu for a few days and it keeps on surprising me: This morning when I turned my pc on instead of displaying list of available OS versions GRUB just prints out "[ Minimal BASH-like line...." and console with prefix "sh:grub>". Why is the list gone and how can I get it back?
View 6 Replies View RelatedWith Ubuntu 10.04 im having trouble viewing the boot
menu.Where would I find that? Also ,without asking the forum this question, where would I find that info?
I installed The latest and greatest Ubuntu 9.10 (Karmic Koala) and everything is clicking along just fine except one annoying feature that I am unable to get my finger on.I have quite a list of choices at bootup. I updated a couple version of the kernel and there is this memtest thing...twice... Then my family also uses windows 7 so that is the default at the bottom of the list set to boot after 3 seconds to keep the nagging to a minimum.
I would like to know the cleanest and safest way to have the list only show the current kernel option and the windows 7 option if this is even advised. Would it be best to have a backup (Previous kernel) in the list? *just in case* Is it safe to seek out the old kernel by version number and uninstall? Will this remove the entries in the list? Is editing the list and leaving other options installed wise? Is there a gui grub2 configuration tool with these advanced options? I have StartUp-Manager, but there is no options to change the list.
Im looking for the best/safest option to get this done because I now see another kernel update image in the update manager and it is going to increase the size of my list once I find the time to update. Im a bit green and scared I will ruin a good thing here. Everything is working perfectly so far and I realize one click and it could all be over.
I now have a machine with Fedora, XP and Ubuntu on.
Now, I can boot XP and Fedora via grub, but I cannot see boot Ubuntu (the last partition on the disk).
How can I get grub to list Ubuntu as well as Fedora?
All have their own partition on the hard drive...
I have Ubuntu 8.04 (32-bits) installed on /dev/sda and Ubuntu 10.04 (64-bits) installed on /dev/sdc (this is an update from 8.04 64-bits originally installed on /dev/sdc). There is a grub on each of these two disks. Both are the old grub (prior to version 2). Here is the top kernel listing from /dev/sda:
titleUbuntu 10.04 LTS, kernel 2.6.32-24-generic (grub sur unite1)
root(hd2,0)
kernel/boot/vmlinuz-2.6.32-24-generic root=UUID=761c3d13-cc55-4117-934f-693766e122b6 ro quiet splash locale=fr_FR
initrd/boot/initrd.img-2.6.32-24-generic
quiet
[Code]...
When you boot up Ubuntu, you are presented with the login screen, with a list of users that can access the machine. I want to be able to only show certain users in that list, and hide others.
View 1 Replies View RelatedHere is the output of bootscript,
Code:
#
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
#
[code].....
I used grub customizer to delete the extra ubuntu entries on the grub after an update but when i restarted what was left was just windows and mac. Is there any way to put it back?
View 4 Replies View RelatedWould like to try multi-boot different distros other than the Ubuntu flavors, they must use grub boot loader automatically. I cant find any list on the web? I don't want to edit menu.list.
View 5 Replies View RelatedSo i would like to change around grub, and i tried looking in /boot/grub/menu.lstbut apparently in Ubuntu 10.10, it doesn't exist anymore? So where is it?
View 4 Replies View RelatedI have a vista/ubuntu 9.10 duel boot laptop. Last week the screen was broken so it went back to the manufacture. Before that I rename the /etc/grub.d/10_linux file and ran grub-update so that Grub will only show windows boot menu (in case it confuses the repairman) now I have the laptop back and I am eating my own medicine.how to restore my ubuntu boot menus? I can now only boot into windows, although it seems like I can go to my ubuntu partition and change back my grub.cfg (which I did not backup!)but I can't remember the menuentry details.Is there any way, other than manually change my grub.cfg, so that I can boot into ubuntu again?
View 5 Replies View RelatedHow do you change the order of the list? I have Xubuntu 9.10 installed on a 5 gig partition. I only use it for Skype as the mic does not work in 10.04 at the moment for me.Anyway, I would like 10.04 to default to the top of the list. How do I change the order when grub loads.
View 4 Replies View RelatedI am currently running 9.10 ubuntu (gnome). I have a dual core intel chip at 3.00 ghz. My mobo is an ASUS P5ND2-SLI. My mobo will support up to 8gb of ram. Now, as we all know, 32-bit os/kernel will only support like 3.2gb, and 64-bit like 4gb. I'd like to install a pae kernel so I can get the most from my mobo, but honestly, I don't have a clue where to start looking for a pae kernel. I'd like to be able to select it from the list that already appears after the grub loads, and if I like it, be able to remove the rest from the list, or just make it default.
Question, in CPU-G, it says my architecture is i686. I don't know if that's the os/distro, or the kernel itself. it also lists the GCC version as 4.4.1 and Xorg as 1.6.4. my current kernel is Linux 2.6.31-22-generic. Again, I'm trying to find a pae kernel, but I don't know if my os/distro will make a difference, if the architecture is the kernel or os itself. I am still fairly new to ubuntu, and I must say, I've made the switch completely from windows.. which blows...
Firstly, I installed my Windows 7 on sda2; then, I installed Ubuntu 10.04 on sda1. But the computer directly get into Ubuntu without listing the grub list. How to get the Grub list back and make sure the Widows 7 is on the list?
View 9 Replies View RelatedI just installed Kubuntu 10.04 dual booted with Windows XP Home. It worked OK until I tried to reboot. Then, when the GRUB boot list came up, there was no response to the keyboard cursors or other keys, so I was unable to select any OS other than the default. Right now, I can't access Windows at all.
Any solution to this? One person suggested enabling USB in BIOS, but I found nothing relevant there. Another suggested I use a PS2 keyboard, which I did, but no change...same problem.
If I can't get a solution to that, how do I change the GRUB configuration to make Windows the default? 10.04 doesn't have the same kind of GRUB boot config file that I recall using the last time I worked with Kubuntu, way back around version 6 0r 8.
I have recently (today) installed Debian on a logical partition of my master hard disk, but when booting it will just list Debian or Debian recovery not listing windows at all. I know there may be some that will think that is a good thing but I do need access to windows.
I had a root about and found this thread which I thought might solve the problem as it is similar:
viewtopic.php?f=17&t=63601
But when I got to the part where I entered the command su -c "nano /boot/grub/grub.cfg" the terminal prompt changed to a > and I felt a little unsure of what I was doing as I would have prefered to have opened the grub.cfg file as a text file, as it is I recieved a syntax error.
As you can probably tell Linux to me appears to be a bit of a black art, but I am enthusiastic none the less. I will list the output of the terminal window so that you may see the steps I have taken.
anthony@Debian:~$ su -c "grub-mkconfig"
Password:
Generating grub.cfg ...
#
# DO NOT EDIT THIS FILE
#
[Code].....
I have installed f14 in my laptop. The hard disk partitions are as follows
Code:
# fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code].....
I am using an old 8.04 live desktop disk
I am running meerkat 10.10 on the partition that is now ,not accessible
I dont know if i have grub or grub2
My machine boots to the grub boot menu list but its all of my old kernels that have been removed from 9.04
I have a menu list in my ubuntu boot/grub partition but they all point to 9.04, i have backups but they are the same 9.04
I have no grub2 menu list in etc/default
Can i just edit the menu list in boot/grub directory to look for my latest kernel and how should i insert it sudo?
I have 4 hard drives in my computer. 1 for may root and home partitions. 2 extras for storage and 1 for Windows. I have the hard drive with my root and home partitions set as the first hard drive in the bios. However, in the Ubuntu setup it isn't the first one in the list. I would have thought that the first drive would be get set to sda. That is not the case.
View 1 Replies View RelatedHow do I make debian not show the grub list, and just go to the newest kernel?
View 7 Replies View RelatedI tried looking this up. It seems that in Ubuntu, you need to edit /boot/grub/menu.lst. I tried that, and the file is not present in Debian "Squeeze". (Just trying it out on a different PC, In case you are confused by my other thread regarding Lenny) So what do I need to do to change the default OS to boot?
View 3 Replies View RelatedI've installed Debian on another partition aside with Windows XP: and when I restart the machine it only list the Debian instalation.
When I do fdisk-l, I see this
/dev/sda1 1 12749 102406311 7 HPFS/NTFS
/dev/sda2 12750 38914 210164507 f W95 Ext'd (LBA)
[code]....
At the moment I have a list that has: Debian 6.0 + kernel information etc Debian 6.0 same again (Recovery Mode) Windows XP Home Edition etc when all I really want is: Debian 6.0 Recovery Mode Windows XP you used to be able to just edit menu.lst but it seems not now.
View 5 Replies View RelatedI am interested in running Ubuntu side-by-side with my windows 7. It appears that the Ubuntu 11.04 installer does most of the work for me as partitioning according to:[URL] but the only thing it says that I would be having to do myself is changing the code on my MBR to point to the GRUB2. I am not afraid of command prompts, but would like some hand holding as I don't wwant to guess and check when dealing with MBR.
1. Is there any way to share documents between my Ubuntu partition and Windows partition? Or some way to make it so documents and non OS specific files are accessible by both OSs?
2. Is it recommended to let Ubuntu do the partitioning for me? Or is there something to be gained by partitioning myself?