Ubuntu :: Cannot Burn Second Disk Until Reboot
Jun 3, 2010
First Ubuntu install, everything is great except one small problem burning. Using Brasero
I burn CD fine Eject disc Drive is not accessible for reading or writing CD's until I reboot the computer Right click on the drive to mount volume and get "Unable to mount volume, no media in drive"
After reboot all is fine. I have tried multiple burners, same issue. USB burners can be unplugged, replugged in and used without a reboot.
Drive is a ASUS DRW 1612DL IDE
Happens in both Brasero and K3B
Ubuntu 9.04 Jackalope
View 4 Replies
ADVERTISEMENT
Jan 14, 2011
I can't burn a data disk through Ubuntu.I tried using the built-in disk creator, It had some kind of error saying the disk cannot be mounted.So I used Brasero instead and I got essentially the same error. When I tried to open both CD's the files appeared to be present but were all corrupt.Braso works fine for burning music CD's but I can't get it to work for data.here is the error log from Brasero:
BraseroReadom stderr: Time total: 131.474sec
BraseroReadom stderr: Read 666760.00 kB at 5071.4 kB/sec.
BraseroReadom stderr: HUP
BraseroReadom process finished with status 0
Session error : Some files may be corrupted on the disc (brasero_burn_record brasero-burn.c:2862)
View 3 Replies
View Related
Jul 31, 2010
have previously burnt many iso Ubntu disks with no problems but evry time I try whether Linux or win I cannot boot from the disk. The burnt disk shows separate files rather than a single iso. I've tried them on 3 different computers with the first boot device set to CD and they all boot normally into Grub (except the netbook which only has XP).
View 4 Replies
View Related
Jan 14, 2011
I can't burn a data disk through Ubuntu.I tried using the built-in disk creator, It had some kind of error saying the disk cannot be mounted. So I used Brasero instead and I got essentially the same error. When I tried to open both CD's the files appeared to be present but were all corrupt. Braso works fine for burning music CD's but I can't get it to work for data. here is the error log from Brasero:
BraseroReadom stderr: Time total: 131.474sec
BraseroReadom stderr: Read 666760.00 kB at 5071.4 kB/sec.
BraseroReadom stderr: HUP
Session error : Some files may be corrupted on the disc (brasero_burn_record brasero-burn.c:2862)
View 1 Replies
View Related
Dec 17, 2009
how can I burn a Blu-Ray Disk under CentOS 5.3 without any gui?
Is there anyone who tried this before?
View 1 Replies
View Related
Sep 20, 2011
Since updating to C5.7 (64bit) when I go to burn an ISO it is not recognizing the blank disk and I have to use the force option(k3b). In 5.6 it worked fine. This is the same box of disks(and everything else) I was using before the update. The disks seem to burn fine (verify ok). It is just a PITA to have to hit the force button every time.
View 1 Replies
View Related
Jun 28, 2010
Problem is that I can't burn disk using nero linux as normal user. If I try to do so, it tries to create a .nrg image in the drive rather than burning those files in the disk. But if i run nero as super user then it works okay. If I run it as normal itan't even recognize my burner
View 2 Replies
View Related
May 19, 2010
Previously I have Centos 5.3 installed. Eventually I upgraded the systems to Centos 5.4 Now is it possible to generate an ISO and burn into a DVD to make a new copy of Centos 5.4 installation disk? This is far better than downloading.
View 1 Replies
View Related
May 30, 2011
Everytime i reboot, it appears on the screen " The disk drive for /usr/local is not ready yet or not present" . I need to click S for skip mounting to skip that part everytime
View 9 Replies
View Related
Jun 12, 2011
I tried to change my /home to another partition, but after reboot I get an error saying the disk /home could not be mounted..fstab:Quote:
e# /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options>
[code]....
View 3 Replies
View Related
Jun 15, 2011
We are using Ubuntu 10.04LTS server on Vmware Vsphere estate. We are using LVM and have / and /var on separate partitions.
We have been experiencing an odd issue with sda1 always being fsck'd after every reboot. We seem to have traced this to the start/kill scripts in rc0.d and rc6.d. It appears that the reason the disk is not being unmounted is because some of the scripts are never being run because they are prefixed with S. We renamed and reordered the scripts to reflect what we thought should be the correct order - i.e. not halting the system before unmounting disks. System reboots cleanly now.
Before list of rc0.d and rc6.d respectively:
lrwxrwxrwx 1 root root 17 2010-11-18 15:06 K01apache2 -> ../init.d/apache2
lrwxrwxrwx 1 root root 22 2010-11-16 17:03 K01zabbix-agent -> ../init.d/zabbix-agent
lrwxrwxrwx 1 root root 22 2010-11-30 08:16 K03vmware-tools -> ../init.d/vmware-tools
[Code]....
basically are we expected to do these changes as part of building new servers for production use? Quite happy to do this but just surprised that this is the default.
View 3 Replies
View Related
Feb 6, 2011
I have an IDE disk which fails intermittently. It contains data only, no system files. (The system files are on /dev/sda1). Mostly at boottime the system fails to mount it even though it is listed in /etc/ftab as /dev/hda1 /mnt/hda1 ext2 default 1 0 I want to recover the files on it.
Is it possible to mount it after bootup? Is it necessary to reboot to detect attached disks? If the BIOS fails to detect the disk, is it impossible to mount it thereafter?
system is Slackware 10. Kernel 2.4
View 4 Replies
View Related
Aug 12, 2010
I just configured two raid setups but after a reboot they are not mounted and seem to be inactive.
md127 = sde1, sdf1 and sdi1 (raid 5)
md0 = sda1 and sdh1 (raid 0)
Code:
root@server /]# cat /proc/mdstat
Personalities :
md127 : inactive sdf1[1](S) sde1[2](S)
78156032 blocks
md0 : inactive sda1[0](S)
488382977 blocks super 1.2
unused devices: <none>
Code:
[root@server /]# fdisk -l | grep "Disk /"
Disk /dev/sda: 500.1 GB, 500107862016 bytes
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
Disk /dev/sdc: 122.9 GB, 122942324736 bytes
Disk /dev/sdd: 160.0 GB, 160041885696 bytes
Disk /dev/sde: 40.0 GB, 40020664320 bytes
Disk /dev/sdf: 40.0 GB, 40020664320 bytes
Disk /dev/sdg: 1500.3 GB, 1500301910016 bytes
Disk /dev/sdh: 251.0 GB, 251000193024 bytes
Disk /dev/sdi: 40.0 GB, 40020664320 bytes
Disk /dev/sdj: 500.1 GB, 500107862016 bytes
Code:
[root@server /]# cat /etc/mdadm.conf
DEVICE /dev/sdi1 /dev/sdf1 /dev/sde1 /dev/sda1 /dev/sdh1
ARRAY /dev/md127 UUID=5dc0cf7a:8c715104:04894333:532a878b auto=yes
ARRAY /dev/md0 UUID=65c49170:733df717:435e470b:3334ee94 auto=yes
As you can see they now show up as inactive. And for some reason sdi1 and sdh1 are not even listed. What can I do to get them back? To make matters worse I placed some important data on them, and even if I was clever enough to keep an extra copy on another drive, guess which drive that was? So, I need to get them activated as is (at least so I can get the data of them) before I can rebuild them from scratch. I'm running Mandriva 2010.1 and rated tehm using the built in disk partitioner.
View 14 Replies
View Related
Aug 13, 2010
Debian and debian based distros issue has a issue that has come to make it self aware to me when I was trying to burn a video on my hard drive with braseo and it won't let me burn more than 4.4 gigs to a dvd with 4.7 gigs of free space even a file that is over the 4.4 gig limit by a megabyte with windows i didn't have this problem. One more thing I have 16 gig flash drive and on debian and debian based distros i can only use 13.1 gigs of it but on fedora I can use all 16 gigs.
View 3 Replies
View Related
Dec 9, 2009
use fedora system, and installed fedora 12 on my usb disk by live-usb creator.Now, the problem is everytime i reboot the computer, the user data and software i installed will disappear.When installing, i choose persistent space which is described for user data and software, but it seems not work now.What can i do if i want my fedora on usb disk is just like the system installed on hard disk
View 1 Replies
View Related
May 12, 2010
I have some large volumes that I don't want to automatically be e2fsck'd when I reboot the server. Is it safe to change maximum mount count to -1 and check interval to 0 while a volume is mounted, or will that cause problems to the file system?
View 2 Replies
View Related
Dec 25, 2010
I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies
View Related
May 4, 2011
I'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.
View 2 Replies
View Related
Oct 7, 2010
I am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.
View 6 Replies
View Related
Feb 16, 2011
last -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies
View Related
Jul 7, 2010
I'm eventually going to download an ISO via wget on a command line Ubuntu Lucid. How would I burn the image to the disc?
View 1 Replies
View Related
Aug 7, 2010
I have just installed Ubuntu 10.04 onto my Compaq Evo N1020v (quite old laptop) The installation seemed to install without any problems and all updates have been done in update manager. Ubuntu is the only operating system on the laptop. My problem is, neither of the file burning apps Brasero Disk Burner or Send to CD/DVD will detect my blank DVD's. Both apps detect the blank CD's without a problem. File browser is able to read data on this DVD type in fact I installed Ubuntu from a DVD of this type.
View 2 Replies
View Related
Dec 22, 2010
I've tried numerous times and different ISO's but I cannot seem to burn ISO's to CD+RW. I'm using Braseo CD Burner. All it does is make the disc have 0 bytes remaining and it acts as if it is a CD-R/CD+R
View 9 Replies
View Related
Jan 31, 2011
I have a dual boot system on a box with 3.6 ghz cpu, 4 gigs memory and 3/4 terrabyte hds. I cannot get a CD/DVD to burn using Brasero. Here is the log: Well here is the last part of the log. for some reason the forum software would not let me put it all in:
[Code]...
View 2 Replies
View Related
Jul 15, 2011
I have Ubuntu 11.04 with all updates installed.
I can not burn any cd / dvd with Braseo, GnomeBaker, nautilus burner, etc.
The discs are "apparently" normally recorded
But then Ubuntu or DVDPlayer does not recognize the DVD or CD I burned.
Conclusion: Waste DVDs because they are unusable and I can not record.
I have a Gateway nv-53 laptop.
P.D: In older Ubuntu editions, Fedora 15, etc, I can burn disc perfectly.
View 4 Replies
View Related
Dec 6, 2010
I want to burn some Ubuntu iso to pass to my my friends . I am myself new to Ubuntu . How to burn an iso image to cd with k3b and where to adjust speed to minimum .
View 2 Replies
View Related
Feb 26, 2011
Some thing is using up a huge amount of my disk space about 10G and I can not determine what it is. When I look at my disk usage in system monitor it say I have used about 25G and when I scan the directory in disk usage analyzer the entire file system used is 15G.
View 1 Replies
View Related
Apr 9, 2010
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
View 3 Replies
View Related
May 19, 2010
Just did a fresh install of Lucid on my new SSD and got this:
View 9 Replies
View Related
Jun 28, 2010
I have an SiI hardware SATA RAID card, with two 500GB disks in mirrored RAID configuration. When I first plugged them in and set it up, things seemed to work ok, but on boot the raid controller told me that the RAID needed rebuilding, and it would happen automatically after POST. So I didn't worry about it, and the drive mounted fine, and it's been that way for years. I just went in and manually on-line rebuilt the RAID in the controller's BIOS, and now when I boot into Ubuntu, both disks show up in fdisk, but neither show up in /dev/disk/by-uuid. Am I missing something?
View 9 Replies
View Related
