use fedora system, and installed fedora 12 on my usb disk by live-usb creator.Now, the problem is everytime i reboot the computer, the user data and software i installed will disappear.When installing, i choose persistent space which is described for user data and software, but it seems not work now.What can i do if i want my fedora on usb disk is just like the system installed on hard disk
View 1 Replies
I managed to damage my 11.2 installation so it starts in the GUI mode only in failsafe mode. Actually I tried before to repair the installation, using the install DVD, but the automatic repair procedure failed. More than that, since then boot loader also seams to be "repaired" so that the Windows installation doesn't appear in the boot menu, but this is another thing.For me, now, the fastest way to get a stable system is to make a new installation. The biggest problem is that I cannot save/backup the emails and accounts settings in an elegant way. I'm using Thunderbird. Of course I would also like to save other apps settings.So is there a way to save user application settings so that I can used them after a new install? I had a look to the yast backup tool but these seams to be a way to archive files, or am I wrong?
View 9 Replies View RelatedI change the audio channels to 6 in alsamixer by choosing my sound card and change the channels to '6ch'. But this setting is not preserved. I see that after a reboot the channels are again going back to 2ch. I have to manually change everytime to 6ch after each reboot. Is there a way to save the setting in alsamixer so that I will get 6ch everytime after reboot? I am not sure I have explained my problem in a way so that you can understand.
View 2 Replies View RelatedSince Fedora isn't a rolling release distro like I'm used to, I was wondering if there was a way to save a list of installed packages to make the next upgrade easier. I'm eagerly waiting for FC15, but still on FC14, and I would like to know if there's a way to export a file that yum can reference to reinstall what program titles I already have installed.
View 6 Replies View RelatedI want to buy another laptop. I want to use FC on it. I need bluray because I want to save data on bluray disks of 25 gb (better than dvds, more space). I have one option, a fujitsu that has bluray writer, big display (I have another one, other model, same size and it's working fine with Fc14, only some small issues).
Second option is a Dell (I had an older dell inspiron before, which worked fine with FC), more expensive, lacking a writer, but it can read bluray. If I take this, I would have to also buy an external bluray writer. Has nice specs, but I am really worried about the graphic card, whether I can make it work with Fc14. I saw some people having problems with linux and this graphic card, while searching on google.
Here's specs for both (sorry for the language from website, but I found in English other specs than these, I guess the specs can be read easily): Dell XPS L702x and FUJITSU Lifebook NH570 I am inclining more towards the Fujitsu, but haven't decided yet.
I already have XP, I installed Fedora to a partition on another hard disk to make it dual OS. During installation, I choose XP for default OS in boot loader. Now the problem it only reboot into XP, I am not able to choose which OS boot.
View 6 Replies View RelatedI installed the live CD version of fedora (dual boot with vista) on my laptop. After I connected to the internet the updates downloaded and all went well. however when i restarted at the boot screen I found two instances of fedora such as
Fedora(2.6.27.9-159.fc10.i686)
Fedora(2.6.27.5-117.fc10.i686)
Other
The "other" is vista. I am wondering if this is OK or whether I have two fedora. If so i would like to remove one of them to save disk space.
I just got an update that installed, and after a reboot I've got one core at 100%. The "you need to restart" icon in the notification tray said "glibc glibc glibc glibc nscd". Now that I look at it, It's switching between both cored. This behavior is consistent over multiple full reboots as well as kexec reboots.
Edit: Strange, just when I finished, the CPU load settled out and now everything is fine. I wonder what was going on. I'm rebooting right now to double check. Edit2: Yep, same issue 100% usage on one core. And it probably will level out soon. I'm not sure what could be causing this. I assume that glibc could be the issue.
I have a laptop, installed with window XP. I just installed Fedora Core, re-formatted all parition on the system, and installed default packages. The installation was successful. But after I took out the installation CD and reboot the system, chose Fedora core (the only banner), the screen just become green, and nothing else from there.
The only thing I am not 100% sure is, during the installation, my monitor was probed as unrecognized. I have tried both 'go with default' and specify one "LCD 1024x...", but either way, after the installation, system won't reboot.
I recently downloaded grub2 source code for my F13 installation and it compiled and installed perfectly, but when I rebooted nothing had happened and grub was still version .97. Is there something I didn't do?
View 1 Replies View RelatedWhen we copy a sector to a file like using dd command, the data in the file is of which format? and of which type of conversion is nesessary to see the data in read able formate. i have tryed the ASCII conversion in dd command but still the data is in un-readable format. and also tell that if i access hard disk sector's data using c language program and copy data to a file then which type of conversion should i do ?
View 7 Replies View RelatedI have a 500GB Hitachi external hard drive that I use for backup. It's about 17 months old and has barely been used. Two partitions reside on it: a 446.2GB ext4 partition I use for backup and an LVM partition that contains an NTFS partition and another ext4 partition.
I started it and connected it to my laptop today (after not using for 4 months). A libnotify message warned that "drive failure [was] expected in less than 24 hours." Palimpset shows "Reallocated Sector Count" with status "FAILING" and value "343 sectors" and "Current Pending Sector Count" with value "1556" and status "FAILING". At first I figured it was just the self-check being programmed for NTFS only (not unheard of). But then I saw that Palimpset has the Linux partition labelled as "unrecognized". The temperature is normal (about 20�C). What's going on here?I have not mounted the drive yet and the data is largely unimportant, so I'm more concerned about the hardware (even though hardware damage seems the unlikely possibility). To prevent or minimize hardware damage, what would my best course of action be?
I need to save mac address (that I already changed it) even when I reboot.
View 3 Replies View RelatedI have a gentoo distribution and need to store the information of dmesg collected until a system crash. At present, after a reboot or a crash the information in dmesg are lost and are not available at the next reboot. How can I save all the information in dmesg until a crash and read them after the succeed reboot?I also checked for dmesg.x files in /var/log or similar files but with no success.
View 4 Replies View RelatedI am having a Xen server xend daemon is taking care of giving interface names like vif1.0 or vif0.2 to the connected guest operating systems on it.I can not save the current IPTABLE rules since upon reboot the xend daemon gives different names to virtual ethernet interfaces i.e. vif1.0 or vif3.0 or vif9.0 like that.I have some rules that I want to be active upon subsequent reboots and not all.Say for example an SSH to external server at port 8000 should forward the request to a machine on LAN.Which I have done by port forwarding from IPTABLES.So I need to save some rules.I was thinking to make a script which on reboot activates those rules.
I am not clear on where to do that.I came across internet and found /etc/network/if-up.d/I am not clear with this directory my question is if I make a scrip which has IPTABLE rules as I want and save it in above folder will it work. I am not clear with what is /etc/network/if-up.dfor.Suppose my logic is wrong then how should I go for it.Also I want to know does a protocol uses two port to make a connection.I have forgotten that thing,i.e if I run an SMTP or ssh then do they use port 22 and 23 both in case of ssh or 25 and 26 both for SMTP like that or just specifying the rules for one port will be enough.I tested these rules in a secure environment where i had disabled firewall and ssh forwarding on router worked well
I am student of MCS and working on final project. I am the user of windows xp. I am new in Linux. I am working on a project that titles "Hard disk data Recovery of ext2 and ext3 in linux". In windows, including dos.h and bios.h header files in program of c language I can send interrupt to bios and access most of the devices like parallel port, hard disks etc. But problem is that there is no bios.h and dos.h files in gcc. Now how can I access my hard drive using c program. How can I call int13h interrupt in linux or there is any other function in the linux to access the hard disk. In fact I want to access sectors of my hard disk using c language program. How can I do it?
View 2 Replies View RelatedI have never used Linux before and know nothing about it . But my cousin installed a Fedoro linux CD on my laptop which previously had Lotus symphony . Unfortunately my laptop had single partition and so Linux overrode the old OS ,ie lotus symphony .
I have some critical data on my hard disk but I have no clue how to take backup this data using Linux . I desparately need this data .
Could somebody let me know how I can access this data and take the backup ?
I am investigating full disk encryption and have made a DD copy of the hard drive which has been encrypted, this DD file is stored on my computer for analysis.
First question is - Anyone know how i can access data in this DD file even though its been encrypted?
Second question - Is there a DD command where i can image the systems memory? I ask this because when a system is turned on, to get past the pre-boot authentication stage you need a password. From what i understand, this password will be passed in to ram when power is applied to the system. Making a copy of the memory will also copy the password?
So I have a fresh updated install of 10.10 on dell dimension 4550
The pc connects to my monitor through a dlink KVM switch so I can switch back and forth between computers.
When I reboot my monitor settings disapear and everything is real real large.
If i disconnect from the KVM and connect Ubuntu directly to the monitor and detect monitor it will allow me to adjust settings so everything looks normal. Until I reboot and I am back to the same huge icons again. If I try to go back and adjust monitor settings there are only 2 settings options because it does not see my monitor through the kvm switch again.
Last time I installed Ubuntu in a dualboot configuration with Win7 on one of my machines, my entire boot sector and Windows install got corrupted, resulting in a complete loss of all my data and requiring a fresh install of Windows.
I looked into this a bit after the fact, and it seemed to me it was due to conflicting hard disk geometry between Linux and Windows.
My question is, how likely is this to happen with Fedora? Is this because of Ubuntu? A bad install? Is there someway I can avoid this from happening when I install Fedora if it will happen?
There is a disk 500 gb, it is broken on /boot and on /root and on /dev/sda1 and /dev/sda2. Whether prompt it is possible to redistribute a disk without loss of data namely it is necessary to make/boot and two equivalent on disk volume.
View 3 Replies View RelatedAnyone knows how to save the currently workspace settings on my desktop when logout/reboot/shutdown the old setting will resume? Currently, i have configured the multiple xterm sessions and placed them in each corner of workspace on dual monitors, but after the system rebooted the xterm sessions are resumed, but they display on one monitor instead of two monitor and overlapped each other. I followed to save the desktop setting at in the "startup Applications preferencesemember currently runnign application". This would not work as i wish. Littlery, i want each xterm session reopen and place in each corner of workspace
View 2 Replies View RelatedIs there an easy way to see what packages use the most disk space? I am running of disk space and need to cleanup.
View 1 Replies View Relatedi've fedora 15 & windows vista installed on hard disk partitions.i can access windows files from fedora but how to view fedora files when i'm working on windows???
View 11 Replies View RelatedTake a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
My system ubuntu 10.04 crashed. Now I boot from liveCD and I can�t mount HDD.
fdisk �l give partitions, but mount does not work. Crashed system should be on sda1 and it is ext4. code...
i'm going to do a fresh install and was wondering, what program i can use to compress and save my data. right now i only have a 2 gig flash drive. i have around 4 gigs of info i need 2 save.
View 7 Replies View RelatedI can not boot into ubuntu anymore, I have a kernel problem. Is it possible to save the stored data? Maybe with a livecd? I am really tired to solve the kernel problem I will only save my data and then I will install ubuntu again.
View 5 Replies View Relatedi want to use tshark to save captured data i want it to save it in a certain directory and every x seconds and 5 files so every x seconds Tshark saves another 5 files
View 2 Replies View RelatedI have Fedora Core 8 installed. I would like to reinstall it so as to get back commands that have been lost. To preserve my user data that has been stored in logical volumes, what selections should I make in the installation process? Are these selections essentially the same for Fedora Core 10?
View 5 Replies View Related
