Usually I start my remote deluge seedbox as a normal user
Code: Select alldeluged
deluge-console &
What is the best way to monitor those processes and bring that up when it crashed?
I for the life of me can not find the list of CLI/console commands for Deluge. I'm trying to at least find the command to change global download speed.
View 3 Replies View RelatedI would like to achieve to get this logo at start, exactly like this: [URL] It is normally something, but maybe there is a package for that ?
View 8 Replies View RelatedThe title says it all.I'm not much for the command line so I really don't know how to debug this.Any help would be appreciated .It was working fine then I had some updates and now the window opens but It is just blank.deluge never fully starts.Transmission starts and I was using it for a while but it never worked as well as deluge.no where near for that matter. It was very slow and seemed to choke itself.
View 14 Replies View RelatedI don't know what exactly I did to wreck the functionality but something did Deluge in. I've purged the configuration files and libraries and reinstalled them three times over and every time in terminal that I start it using deluge-gtk I get the following output:
Code:
ryan@ryan-PC-Ubuntu:~$ deluge-gtk
Traceback (most recent call last):
File "/usr/bin/deluge-gtk", line 9, in <module>
load_entry_point('deluge==1.2.2', 'console_scripts', 'deluge-gtk')()
[code]....
I was seeding a folder with deluge and when I removed the file from deluge I chose remove data by mistake, so can I recover my folder?
View 4 Replies View RelatedHow can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.
View 6 Replies View RelatedI have a "time-server". It's sending time to different devices through different ports/protocols. The problem is that it has no operator and that makes some extra difficulties.
Now when i try to start it using terminal Code: Select allsudo ./myprogram works fine and
Code: Select all./myprogram doesn't work.
It is so because without sudo i have no access to ports. As a result If i add my program to System->Preferences->Startup Applications it has the same problem. So i need to start it as root, auto-start, right after auto-login to system but without entering password cause nobody will do it.
Also I need to start ntpd but it also asks password sometimes I've tried googles but it offer a few ways with entering password that isn't suitable for me or writing some scripts/changing system files but with no example I'm afraid to break it all. So is there a way to start Myprogram and NTPD as root with no password entering?
My system is Debian 6.0.10 Squeeze, Kernel 2.6.32-5-686
After install debian 8, I can't see system start and stop message from console ... How can I enable system message from console in debain 8?
debian 7 output
----------------------------------------------
root@demo:~# service apache2 restart
[ ok ] Restarting web server: apache2 ... waiting .
root@demo:~#
debian 8 output
-----------------------------------------------
root@demo:~# service apache2 restart
root@demo:~# <=============================== No message (start or stop)
I am using Deluge on my Debian server, for a simple auto start at boot I us the following lines in the /etc/rc.localsudo -u User delugedsudo -u User deluge-webDeluge is running after boot but i wane check if its running with User account and not as root.So I did a ps -aux | grep deluge and notice a line that root is trying to run the command sudo -U User deluge-web (i think its trying).
User 1735 1.5 1.0 187680 21604 ? Sl 16:30 0:04 /usr/bin/python /usr/bin/deluged
root 1736 0.0 0.0 20924 1168 ? S 16:30 0:00 sudo -u User deluge-web
User 1737 1.5 1.1 70400 24084 ? S 16:30 0:04 /usr/bin/python /usr/bin/deluge-web
The question is what does this mean? can i leave it running, is it better to kill it if so how to prevent that it happen on start-up.
I have just did a fresh install debian jessie today in virtualbox, the X window manager is fxce. By default the default runlevel is 5, and I tried to change the /etc/inittab content:
Code: Select allid:3:initdefault:
and reboot, but it didn't effect to the result, the X-window auto loaded again >.<
I need to change it that will boot in to console mode first, and can run startx if necessary, how can I change it permanently?
I'm not sure how to do this. I checked the hard drive preferences and looked through the forums... I don't want to manually mount my hard drives(s) every time I boot up just to access my music and wallpapers.
View 5 Replies View RelatedHow to auto start programs in startup time?
View 4 Replies View RelatedI have a debian 8.1.1 server running owncloud and a proxy server at home. I have everything working fine, with one exception. The proxy server won't start on boot. If I ssh into the server, then run "sockd -D" as root, it starts up and runs just fine. Any guides I find refer to the init.d script method that worked in Wheezy, but that isn't working. I think it has to do with Jessie switching to systemd? I had used someone elses script in init.d, and ran update-rc.d, but it still doesn't start.
With Jessie, how can I make "sockd -D" execute on system startup?
I'm not using one atm, tried "exec startxfce4" in my .xinitrc but didn't work.
System is Debian Stretch.
How to get compiz to auto-start. What seems to be the generally accepted method (from what a few google searches and the debian wiki tell me) of using gconf-editor and changing the window manager from 'gnome-wm' to 'compiz' in desktop > gnome > session > required_components doesn't change anything. The only method I found that did not involve using a terminal and running 'compiz --replace' every time I boot the computer was to add compiz and fusion-icon to the gnome startup apps, but this causes unwanted flickering (it starts metacity and then replaces it with compiz, ie it's simply automating what I would do with the terminal). Autostarting the fusion-icon alone does not start compiz, although it allows me to start it from it's menu if I right click the icon. Note that I sometimes use fluxbox as well, so starting it on boot isn't really an option either.
Perhaps this can be useful :
compiz:
Installed: 0.8.4-4
Candidate: 0.8.4-4
gnome-session:
Installed: 2.30.2-3
Candidate: 2.30.2-3
On my debian web server I curently have ImageMagick 6.3.7 08/07/09 Q16 since this is an old version of imagemagick i wanted to upgrade my system that still runs etch, and afterwards upgrade imagemagick. I can not see what version the current lenny imagemagick package has, but I assume it is newer then 6.3.7, no?
When i ugraded I found out that my apt-sources used stable rather than etch. So I already had a mix of lenny and etch I suppose. I then had > cat /etc/debian_version 4.0 Before I upgraded I changed my apt sources from stable to etch, updated the package-tools and did a dist-upgrade (for details, I followed these instructions). After restarting I have still 4.0 as debian version. Also uname -r is 2.6.17. How can I do a correct update?.
Also my services were not started (ftp,ssh, apache2), so I asked my hoster to start the ssh service. This morning everything was up again, but it seems like nobody there have had a look at this. How do I absolutely ensure that my ssh service is start at boot. It is a remote webserver, so I need at least this service to be running.
KDE has shut down without message. Am in runlevel 5, was taken to login screen. I can start xfce, but if I attempt to login with KDE as the window manager, I am presented with the login prompt again. No error messages. where to start trouble-shooting.
View 14 Replies View RelatedI have problem with installing Deluge. I did not find any manual how to install Deluge. And I wanna install deluge newest version, and that is on Debian testing packages. So how can I install Deluge from debian testing packages. I read a little bit Deluge forum and there I see, there is lot of problems with Deluge on Debian Lenny. And all I need is use Deluge from web interfaces, thats all. How could I set it up?
View 6 Replies View RelatedI am trying to keep a stable system (after a date with the unstable version which broke everything ) but a package (namely deluge) is horribly out-of-date. It is better in the unstable packages.I read the official documentation with the preferences file, pinning and the rest of the apt zoo but after a few tests I am still there with my old deluge in my stable environment.(in reality I managed to upgrade deluge by swapping the sources.list file with one with only the unstable repositories -- but this is not a particularly clever approach)I would be very grateful if someone could give me the right content for the preferences file which would allow to keep the system at stable level, except for the deluge package which should be updated to the newest, bleeding edge version.
View 3 Replies View RelatedI just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local
View 13 Replies View RelatedI press On-button, Debian boots, logs in and automatically connects to the Wireless network AND! to my local pc via LAN. It runs an ssh server, so I can ssh into debian over internet and communicate with the local pc (send a magic packet).Here are my problems:
1) I don't how to log in automatically. This and this doesn't work.
2) I need a network tool that can manage multiple connections and has a reconnect feature. With the default network manager I cannot even connect to more than one network simultaneously although I have two network devices of course.
And I guess I can run all that in console mode, right?
Yesterday i fell asleep while my laptop was still on. when i woke up this morning i stared at a black screen. I tried to wake it up but nothing happened so i just turned it off.
But when i turn it on again i get this after the login screen: Xsession: Warning" Unable to write to /tmp; X session may exist with an error
After a few minutes i get the message, that my temp directory id full.
Now the problem is, that i cannot even login in console mode! i tried the "console login" mode from the login window, i tried switching the console with ctrl+Alt+F1, i even tried to start in recovery mode. But all i get is a blank screen with a blinking cursor in the middle, but i can't write anything!
fedora logo animation splashscreen that appeared when the Live CD was booting? Now when I boot into my Fedora 15 I get an ugly verbose console-like output and am not interested in seeing what's happening behind the scenes!
View 3 Replies View RelatedI removed gdm and kdm and my laptop started in console mode.Now I would like to get same thing - I made upgrade to ubuntu 10.4 and it starts again in graphics mode. I removed from grub menu.lst splash and quit, removed gdm and kdm - and again I receive graphics prompt.PS I removed also failsafe-x.
View 6 Replies View RelatedI have a very strange trouble with gnome/X11/Adapter/memory, I really don't know! When I upgrade my memory to 2Gb (1Gb+1Gb), graphic mode not starting! Load only console, but gnome not load. And besides error message not showing. 'starx' command leads to black screen and nothing happends, keyboard doesn't work too. if I leave 1Gb memory, all working perfectly! tell me where I can find log-message or how I can solve that problem. In /var/log I can't found anything interesting.
View 1 Replies View Relatedfor my small home server i want the machine to NOT start x11 automatically but to enable remote logins via xdmcp.The problem: xdmcp is controlled by gdm. If i disable gdm to have no x11-login-screen xdmcp does not run...Is there any way to start gdm without starting x11 on the console?
View 2 Replies View RelatedI have a headless server, and I want to prevent GDM 2.30 from starting the graphical login on the console screen. As I use XDMCP, I still need GDM running on the server... With previous versions of GDM, I was doing that through gdmsetup, which ended with these lines in /etc/custom.conf :
Code:
[servers]
0=inactive
but it seems that it's not working anymore with 2.30...
I need to start a xen domain from console with xm command but the 'new' sub command is missing?
[root@sambie xen]# xm new CENTOS-5.3-PDC
Error: Sub Command new not found!
I could not solve examining the start and stop scripts. When I boot (default runlevel 5) my system all log messages are displayed on /dev/tty1. After the boot process has finished and kdm is started no more console messages are displayed on /dev/tty1. Instead all console output is redirected to /dev/tty7. When I change the runlevel from 5 to 3 boot.msg shows
Code:
Changing back to runlevel 5 gives
Code:
Why kdm redirects console output to /dev/tty7 instead of /dev/tty1?