Ubuntu :: Can't Log In From Terminal Mode
Mar 17, 2011
I'm trying to install Nvidia drivers and need to get out of X to do so. I hit Ctrl+Alt+F1 and am asked for my login.I enter my login and password and get kicked right back to the login prompt after this message: Cannot execute ksh: no such file or directory.I had switched to ksh by default back when I first installed Ubuntu. I am afraid I don't remember what changes I had to make in order for it to be default for me but there's obviously some script I edited that is running at boot time.
View 1 Replies
ADVERTISEMENT
Jun 11, 2010
I'm using a system with nvidia graphics card gt220 with driver version 190. I tried installing mplayer and that installation procedure upgraded my nvidia driver. The installation was not successful and it gave an error that there are some broken packages. I ignored that warning and shutdown the system. When i tried to boot again after some time, it took me to a terminal instead of login screen.
I tried to recover the system using "report broken packages" option from recovery mode. I could able to delete all the broken packages. After removing all the broken packages, i tried to install nvidia drivers using command "apt-get install nvidia-glx-190".
View 2 Replies
View Related
Sep 8, 2010
I know I have seen/read this someplace before but I cannot find it.
Just installed ver 10.4 -64 bit desktop, I want to make some modifications to the environment -- want to boot in terminal mode and not desktop (for fun and giggles), but if I open up a terminal, enter su- and password, then edit the (I hope) appropriate file it comes back and says that I do not have permission.
Is it because I installed the desktop version, or because I don't know enough linux to shoot myself in the foot yet? Should I go back to square one and install the server version then configure it so that it starts up the desktop?
View 2 Replies
View Related
Jan 19, 2011
I have just upgraded my IBM desktop to Ubuntu 10.10 form 10.04 (which by the way worked well). After the update it boots up into the terminal mode. What gives and how do I exit it and get into the deskop.
BTW I also updeated a 10 year old laptop and there are no problems. I am using it right now.
View 2 Replies
View Related
Jul 2, 2011
how I might try using Recovery Mode to fix whatever is wrong? When i'm booting, I no longer get the gui login prompt. Instead I get a Terminal-like login prompt. I can login and everything but I'm a noob and don't know what to do. I booted to recovery mode and selected fix broken packages but this didn't fix the problem. is there anything else I can try?
View 5 Replies
View Related
May 6, 2010
I'm trying to exit X entirely and use the console to install my nVidia drivers, I have a .run file. I've tried all of the normal commands like init 3 and everything, killing the X process, Ctrl Alt F1, Ctrl Alt Backspace, but nothing wants to work. What do I need to do?
View 13 Replies
View Related
Aug 5, 2011
I wonder if it would be possible to create a custom boot menu entry in grub under Ubuntu (11.04), that boots the system into terminal instead of the login screen.
The effect should be something like the root shell in (rescue mode) boot menu entry, one that gives me access to a root shell or a less privileged shell, without the need to select "root shell" explicitly.
If possible, I also would like to customize the shell started by, most preferably by specifying a shell script to run so that I can start something other than bash, like vim.
My intention is to create a "fast" boot mode to give me a usable system within seconds (to take notes, for instance) without needing to start GUI. Therefore, it is preferred that the silent option is turned on.
Note: There is a requirement: that no existing feature of the system is removed. That is to say, the gnome desktop (and Unity) should remain intact, and is only disabled when I choose this mode.
View 2 Replies
View Related
Mar 8, 2010
How could I add quick edit mode in fedora terminal?i.e. In terminal, if highlight a word and and press enter, it will copied to clipboard and click mouse right click, I should be able to copy like if we enable quick edit mode in Windows.
View 2 Replies
View Related
Dec 30, 2010
I want to run pdf files on fedora 13 through text-only mode(i mean not gui but when i change it to init 3).At gui i know how to do it by converting pdf to html but if we are not at gui?
View 4 Replies
View Related
May 5, 2010
Im running a virtual linux server on a low-end system, and i wold like to configure the server to boot in terminal window and not to the Gnome log in window, this is because of the low specs on the hardware.
View 5 Replies
View Related
Mar 29, 2011
I Am considering adding a sound card to my system and I am open to any suggestions. I have a lot of media files and I also do some gaming.
View 1 Replies
View Related
Jul 1, 2010
This is after months of Mint, which is limited. One problem. It (Deb)boots to the terminal mode. uh... call me stupid, but I have no idea how to get to my desktop. Never needed that command once in my life. I can't find the answer anywhere. Typical. The most basic info is always overlooked. Whats the command line to get to the desktop so I can reconfig this?
View 14 Replies
View Related
Sep 11, 2010
I had Emacs installed in Fedora 11 and want to run it text-mode,but everytime when I type emacs command in gnome terminal,an emacs graphical window pop up. I want to emacs to back to text-mode by typing M-x text-mode, and it doesn't work.Can emacs run in text-mode in X11 environment?
View 2 Replies
View Related
May 8, 2010
My password doesn't work to enter super user mode in the terminal. this password works for all other administartive uses in and out of the terminal, just not for entering super user mode.
View 8 Replies
View Related
Apr 10, 2011
I have a ubuntu linux working in TEXT mode. I would like the change the font size (or if possible, get my terminal with inconsolata font). How can i do it?
PS: i don't have a GUI or X Windows running.
sudo dpkg-reconfigure console-setup
View 1 Replies
View Related
Feb 5, 2011
I've recently setup a custom home server running openSUSE 11.3 64-bit in terminal mode. I've since successfully setup and configured it to act as an iSCSI target using the iscsitarget package and the corresponding kernel module, along with the YaST module for the configuration. Prior to setting up my hard drive accordingly, however, I noticed that when I ran 'zypper up' in a terminal I got the following:
Code:
pph-server:~ # zypper up
Loading repository data...
Reading installed packages...
[Code]....
At the time I accepted, and found later that it removed the setup I had, meaning I had to start over. However when I ran YaST in a terminal it then wanted to re-install the iscsitarget package, which subsequently removed the tgt package, and so this continued for a bit. (Thankfully no actual data was stored on the target at this stage .) For the time being I've locked the iscsitarget package and the kernel module to prevent zypper from wanting to remove it and install tgt instead since I now have my target working as I want.
The question I have is why zypper was trying to remove iscsitarget and install tgt, and yet the corresponding YaST module was wanting to do the opposite. Is tgt considered a better option by the openSUSE developers, in some way, for setting up an iSCSI target? Is iscsitarget development/availability being ceased by them in favour of tgt? Is there something else I'm missing? Neither of these packages seems old to me: the latest version of iscsitarget was released on SourceForge last July, while tgt was only updated this month.
View 2 Replies
View Related
May 13, 2010
What are the differences between "su -" in a GUI terminal and directly logging in as root in a text mode terminal (tty1-tty6)? Any environment, path or other functionality differences?
View 14 Replies
View Related
May 10, 2011
I searched and found several solution but those are distro specific. I need to find out if distro is running in live mode (from CD, USB) instead it's installed on hdisk. The solution should be independent of distribution.
View 7 Replies
View Related
Aug 30, 2010
Below is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
View 3 Replies
View Related
Apr 23, 2010
how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies
View Related
Nov 18, 2010
I attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies
View Related
Sep 21, 2010
I ordered this USB 802.11n dongle for about $10 and am having problems.I found a firmware related bug (Bug #595455) that keeps it from working out of the box and got around that. I put the right firmware file in the right place and CAN CONNECT TO B or G Access Points.hen I put my AP in N-Only mode, I can see the network, but cannot associate. With the AP in mixed mode I can Associate using G.The most interesting thing I found was something that had very
few google hits (like 4). In the dmesg output after associating I see the message:
Successfully associated, ht not enabled(0, 1)The most interesting thing about this is the (0, 1) at the end.I don't know what that means but it seems like a clue as to what the problem is.This device uses the realtek chipset 8191S, there are conflicting reports on this, but all the reported possibilities seem to use the same driver from realtek (rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.2010 0625).Here is some random info:
Dmesg output:
[85082.620027] usb 1-3: new high speed USB device using ehci_hcd and address 6
[85082.754586] usb 1-3: configuration #1 chosen from 1 choice
[85082.755456] ==>ep_num:4, in_ep_num:1, out_ep_num:3[code]........
View 1 Replies
View Related
Jan 30, 2010
I installed ubuntu 9.10/9.04 on my usb key as live image couple of time. I have trouble when I try to install wine on my usb key. I am wondering what is the difference if I install my ubuntu into my usb key directly? will that be slower compared with live CD mode? I guess live CD mode may use memory as part of harddisk to save temepory files and normal usb linux installation won't do this for me. Is this true?
If so, do I have a choice to point my tmp directory to system memory area?
View 1 Replies
View Related
Feb 8, 2011
When I first installed ubuntu 10.10, the display was for some reason tinted green and shifted a few inches to the right. After experimenting with the resolution preferences, I eventually got it to a large resolution (1280x720 ... or something like that) yet is was quite blurry. I found out that the problem was with my monitor after I switched it to TV mode, then back to PC mode. It became perfectly clear! All I had to do then was adjust the screen positioning by shifting it left a bit.
Even though I have made the resolution I figured out to be default, whenever I turn the PC on after shutting down, it goes back to the "green-and-to-the-side" mode. :/ Ain't really a big problem, until I tried to fiddle with the resolution preferences s'more.
Somehow, I have set it to be twice as wide of the maximum my monitor can display, went back to being green tinted for some reason, and is completely shifted left (yet the right side is still visible) This means that I cannot see what is going on the left side, and cannot adjust the resolution preferences, nor can I click blindly cuz the border is only around my visible side of the screen. Now it is stuck like this.
I've researched many hours and eventually found the terminal command for the resolution preferences. it popped up on the visible side. Although it was to no avail cuz I HAVE TRIED EVERY SETTING AND OPTION and absolutely nothing changed. I assume a system restore would simply revert it back to the previous satisfactory settings, but the thing is I want to FIX it. I am new to this terminal stuff, so I want to learn it and all that. To put it simply, here's what I want:
Learn how to manually adjust resolution without depending on a simple dialog box. Make the satisfactory resolution default and consistent through turning it on and off. Link that could teach me the essential commands, all this googling is stressful. D:
View 3 Replies
View Related
Dec 7, 2010
I accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies
View Related
Dec 1, 2010
My linux workstation recently crashed. After rebooting, Linux (Red Hat 5.3) will not boot properly and automatically went into emergency mode or recovery mode i think. I can still see my /home/user/ and all the files inside.I boot from CD to rescue mode and tried mounting read-only the /dev/sd5 which contains the files in the crashed hard disk to try to copy out my files but mounting was unsuccessful (invalid argument). I checked the filesystem type using fsck -N /dev/sda5 and shows it to ext2. i tried to mount another known working hdd and was successful.
My question is why in emergency mode, the crashed hdd is able to be mounted automatically as read-only but cannot be done in rescue mode thru a bootable CD?Is there any special mount options used in emergency mode?I also cannot copy out in emergency mode booting from the crashed hard disk as everything is read only.
View 3 Replies
View Related
Jan 2, 2010
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
View 6 Replies
View Related
Sep 14, 2009
The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies
View Related
Jan 12, 2011
I was reading about ext3 feature and I have read about its journaling modes. I would like to ask what is the default journaling mode of ext3 fs in slackware(or is it in all distro using ext3)? I'll install slackware when my new pc arrive and the fs I will use will be ext3 and I like it to have data=journal mode for its journaling. I have read in some wiki how to set the journaling mode into data=journal mode.
Code: # tune2fs -O has_journal -o journal_data /dev/sdXY Do i need to issue this command or is this the default mode in ext3 in slackware?
View 9 Replies
View Related
Jun 13, 2011
I am an emacs user, and I noticed that on my new machine (running F15, 64bit) flyspell-mode will not work in tex mode.
I get errors that look something like this:
Code:
Spell-checking inequality-model.tex using hunspell with default dictionary...
Spell-checking region using hunspell with default dictionary...done
ispell-send-string: Process ispell not running
When done with a buffer, type C-x #
code....
View 2 Replies
View Related
