I have Ubuntu 10 installed.
I have installed ettercap using:
Code:
sudo apt-get install ettercap
But I cannot see it in any of the Ubuntu Menus(Aplications-->Network etc).
If I type
Code:
ettercap
[Code]....
I have been playing with Ettercap on my home network, learning about packet forwarding and all such things. Recently, after doing some certificate stuff, Ettercap is performing the SSL attack where it sucks out the password of a user after it issues a fake certificate. How do I turn off the SSL attack in ettercap when I'm not interested in SSL information?
View 1 Replies View RelatedI goggled a lot on how to get ettercap working on ubuntu, but unfortunately wasn't able to find anything good.
So, i decided to make a new post about it.
1. The GUI mode crashes after scanning for hosts.[ Fixed by downloading the version by timothy]
2. After Scanning, When you start Sniffing, and run the chk_poison plugin it says no poisoning at all . Why, i am not able to poison it at all?
3. Running the original ettercap in text mode(-T), also gives the error , if you uncomment the two lines required for SSL sniffing, then you are met with error saying that you don't have enough permission to and suggest that i should either upgrade iptables or my kernel[I am sudo]. O.o?
i downloaded ettercap and wireshark but when i ever i press scan for hosts after doing the things before it doesn't scan it just gives me
Randomizing 16777215 hosts for scanning...
I used to have ettercap on backtrack 4 and everything was ok...But on ubuntu 10.04 I'm having this issue; it is not showing passwords (if i log in for example in a forum with a http link )and not sending false certificate (if i try to log in in https links, after uncommenting the redir ip tables in etter.conf).Other features seems to work alright (such as dns spoofing) and the arp poisonning is succesful. Besides, Wireshark gets the passwords.
View 9 Replies View RelatedI can not manage to get any passwords on my network with Ettercap.I have followed several tutorials but I still seem to have no luck in getting them.I have BT5/KDE/32bit installed and using an alfa network adapter (RTL8187).First I configured etter.conf script to look as below:
ec_uid = 0 # root is the default
ec_gid = 0 # root is the default
# the command used by the remote_browser plugin
[code]...
How can I create an ettercap log ?, how can I read it with etterlog command ?.
And how different new version of etterlog and etterlog v0.6.6 ?. How can I get ettercap v0.6.6 manual ?
ettercap can see http request but not response
I'm trying to see regular http responses from my wireless ipad (victim) from my wired pc (attacker). Everything's working great but I can only see the http requests not the responses.
I've done much reading and googling and tried registering in more relevant forums but some forums were shutdown, so I've come here.
Code:
# setup ip forwarding
echo 1 | sudo tee /proc/sys/net/ipv4/ip_forward
# use ettercap to do the mitm using only mitm
sudo ettercap --iface eth0 --text --plugin autoadd --only-mitm --mitm arp:remote /192.168.0.1/ /192.168.0.155/
[Code]....
for dns spoofing in my local network (one laptop and a router switched), but that does not work. An access to a specified site does not redirect.If you need any details, The command I use is:
Code:
#ettercap -T -q -i eth0 -P dns_spoof -M arp // //
I am using fedora 13 and have installed ettercap from Add/Remove Software in Fedora. But when it is starting(Application->Internet->ettercap), it is not able to detect any interfaces ( i am using eth0 interface, wired lan ).
View 4 Replies View RelatedMy Host Lists of Ettercap is empty when I try to sniff my Lan. I modified /etc/etter.con, obtaining this:
Code:
# if you use iptables:
redir_command_on = "iptables -t nat -A PREROUTING -i %iface -p tcp --dport %port -j REDIRECT --to-port %rport"
redir_command_off = "iptables -t nat -D PREROUTING -i %iface -p tcp --dport %port -j REDIRECT --to-port %rport"
and the error is this:
Code: iptables v1.4.6: can't initialize iptables table `nat': Permission denied (you must be root)
Perhaps iptables or your kernel needs to be upgraded. I lunch ettercap as root.
I have installed ettercap using apt. But, when I scan for hosts, Ettercap crashes. I've found on the Web that there's a solution, but I don't manage to solve this problem.
View 3 Replies View RelatedI am using fedora 13 when i am starting ettercap, i get following warning and when i clicked "scan host" , the program quit after scanning hosts due to some segmentation fault...here is warning
Code:
[piyush@localhost ~]$ sudo ettercap-gtk
ettercap NG-0.7.3 copyright 2001-2004 ALoR & NaGA
(<unknown>:2315): GLib-GObject-WARNING **: gsignal.c:3079: signal name `depressed' is invalid for instance `0x9f9ee00'
[code]....
I am using unbuntu as root. I've made all the edits to my etter.conf file as follows:
[privs]
ec_uid = 0
ec_gid = 0
and:
remote-browser = "firefox -remote openurl (http://%host%url)"
I also turn on ipTables. I then start my attack as follows:
ettercap -T -Q -M arp:remote -i eth1 /client-ip/ // -P remote_browser
echo 1 > /proc/sys/net/ipv4/ip_forward
ettercap -T -Q -M arp:remote -i eth0 /target_ip/ /gateway_ip/ -P remote_browser
My problem is Firefox only shows https:// pages and not regular pages like google. I'm stumped. I have no clue why. I've tried other versions of linux. Different computers and still the same result. If I turn quiet off I see in my terminal all the traffic.
a client asked me to install ettercap on their linux gateway machine - two ethernet machine. I tried it in bridged mode, it but as soon as I start it, the traffic stops and no one can access anything. Did anyone ever succeed in running it on the gateway?
View 1 Replies View RelatedI am quite new to Linux. Just some basic information, I am using windows xp but have installed vmwork station and am running Red Hat enterprise linux 4.
When i run ./configure it gives me this error. "configure: error: libnet >=1.1.2.1 not found "
I've been using ettercap for awhile now for testing the security of the websites I manage for others along with home network stability and I've recently come across this issue:
When running:
Code:
ettercap -G
I get an error in the terminal saying:
Code:
Dissector "dns" not supported (etter.conf line 70)
I proceed to select my interface and scan for all hosts, then ettercap crashes, exits and outputs the infamous message:
Code:
This shouldn't happen...
Segmentation Fault...
recompile in debug mode, reproduce the bug and send a bugreport I took a look at line 70 in my etter.conf file and it looks like this:
Code:
dns = 53 # udp 53
I've searched online and it seems like others have this issue as well, but I can't seem to resolve it.
I have been using ubuntu since 10.04 version and configure with compiz to activate the corners, cube, etc. No problems with that. When I upgraded to 11.04 these things were not working but honestly I did not care that much and was just playing with compiz, so I was playing with an option in compiz about the size of the icons in the new 11.04 launch bar, just when I clicked it my top bar and launch bar are gone and not coming back after rebooting many times. BTW I already uninstalled compiz via terminal and the same problem is happening, maybe important for you to know (alt+f2 or other shortcuts not working except for ctr+alt+t)
View 9 Replies View Relatedi run xubuntu 10.04 and for the past 2 hours i was trying to launch a .jar file and finnaly when i installed java properly this happened:
Code:
sasha@sasha-laptop:~$ java -jar '/home/sasha/Desktop/Minecraft stuff/minecraft.jar'
Exception in thread "main" java.awt.AWTError: Cannot load AWT toolkit: gnu.java.awt.peer.gtk.GtkToolkit
at java.awt.Toolkit.getDefaultToolkit(libgcj.so.10)
at javax.swing.plaf.basic.BasicLookAndFeel.initialize(libgcj.so.10)
[Code]....
I am attempting to use tomboy and it does not launch giving me the following:
Code:
~$ tomboy
(/usr/lib/tomboy/Tomboy.exe:3602): GLib-WARNING **: g_set_prgname() called multiple times
(/usr/lib/tomboy/Tomboy.exe:3602): GLib-WARNING **: g_set_prgname() called multiple times [INFO]: Initializing Mono.Addins
[Code]...
installing all the packages again without comment or error, but the problem persists with exactly the same error as above.
I installed it yesterday. It worked well. I was able to log into windows without any trouble and restart into Ubuntu without a hitch.
This morning I launched Ubuntu as usual vi GRUB. I was asked to install about 135 upgrade files, which went withou an apparent challenges. I then went through the restart and noticed that there was an extra two choices in GRUB, but I just left it to launch Ubuntu automatically. Which it did.
I then messed about with the appearance settings. Noticed a some more updates were waiting which included 49 files. I went through the updating process and restart.
GRUB worked well, and I was soon loggin in with username and password.
The Ubuntu Screen became visible with the flashing horizontal line and about 3 seconds later everything froze. I waited for several minutes - I timed them - but still no progress - everything remained frozen.
I switched off the machine completely, as I knew of no other way to get out of this situation. I rebooted and when GrUB launched I booted into windows 7 with absolutely no problems.
I used restart in windows and then allowed GRUB to boot into Ubuntu. Once more I was able to log in but soon after the Ubuntu Screen appeared and the horizontal line flashed for a few seconds, everything froze. This time I waited five minutes before switching off the machine by disconnecting at the mains.
I am now using windwos 7 to make contact
I am running Kubuntu 10.04 and i want to make some icons on the desktop to launch various telnet sessions. So i make a .sh using vi test.sh and then put in telnet 180.9.x.xx and save and quit. Then i chmod 777 it to make it executable and then moved it to my Desktop folder. But when i double click or right click and open with konsole nothing happens. I know it is probably something stupid which i have overlooked but when i have done this in Ubuntu in the past it has worked.
View 7 Replies View RelatedI have an acer aspire one. I had iPC osx86 10.5.6 installed on it. then I installed ubuntu 10.04.1 and now i cant get OSX to start up. OSx shows up in grub but when i select it i just get a blank screen.
View 2 Replies View RelatedI downloaded the current version of Sigil 64bit from Google Code https://code.google.com/p/sigil/ and it is just not working. Whenever I try to launch it the screen appears for less than a second and then vanishes. Does anybody know how to fix this?
View 5 Replies View Related[URL]theres a thread asking to issue commands to one tty from another, i'd like to know, if there's a way this can be done without screen, and so that you could issue commands to the gui, from other tty.
View 1 Replies View RelatedIs there a way to autohide the launch bar in UNR 10.10? I thought there was a way in the older versions.
View 3 Replies View Relatedhow to tell to the linux system, that when it will switch to the sleep mode, system launch a specific code (in python).
So two solution possible?
1) set a specific config file witch inform system to launch a python.py code. ?
2) config my own screensaver witch execute app when system call it. ?
In the two case, I don't find informations on the web.
Is that possible to ssh to a box and launch a programme, say firefox, have the session disconnet when not using it and then you can reconnect to the same session again?
View 2 Replies View Relatedi've been looking for an answer to this for a few days now before i decided to post. i have a simple script that works perfectly if launched manually from an xterm window. the script has been already been chmod +x.
i have my account set to autologin to an xterm session. i have symlinks in rc2.d and the script itself in init.d. i can't find any clear explanation of where i need to put my script to it launches itself right after my account logs into an xterm session. i can ./script after my xterm session starts and everything works fine but i just cannot find where to put it so it launches after my acct auto logins.
I did a install of 9.10 on a Lenovo T61p a few weeks back. The install went seamlessly and everything was running along just fine, then suddenly, I'm having the problem that every time I go to launch a new window, it takes 30 - 40 seconds for the window to launch. Once the window is launched, performance seems normal, with one exception. When I go to launch Nautilus from the "Home Folder" menu under "Places", it takes 30 - 40 seconds to launch the window, then another 10 -15 seconds for the folder items to appear. If I click to descend into a folder, it takes 10 - 15 seconds for the folder contents to appear. This stuff was all instantaneous.
View 2 Replies View Related