I just recently installed Xubuntu 11.04 and I want to adjust the brightness levels. I tried using the corresponding buttons on my laptop, but they aren't working. Where can I find the brightness settings on the OS?
I tried this thread: [URL] , but "Power Manager" didn't have that setting.
I cannot adjust the screen brightness in the power management menu. I can access the window and move the scroll bar, but there is no change.
I am on v 10.04 32bit , a Benq joybook s35.
It was working just fine on the previous version of ubuntu.
My computer (Samsung R580 N330M)seems doesnot adjust brightness both power manager and configuration file in /proc, I tried NVIDIA setting and it works,but I think it changes the color,not LCD. is it caused by driver problems?
View 3 Replies View RelatedUbuntu 10.04 lucid with gnome-power-manager installed on a HP elitebook 8530p. FN keys and desktop display applet will not adjust the display. when I first boot my display is pretty bright with either it plugged into ac or not until i either plug or unplug for the first time then the display dims some, but will not get bright again plugged or unplugged, also /proc/acpi/video/DGFX/LCD/brightness shows it set to 100% at all times it never changes. I'm using the ati driver tried running aticonfig --acpi-services off, but it made no difference. It worked fine in karmic and ibex. I'm out of ideas on how to fix this one. Can anyone point me in the right direction on what to try next?
View 5 Replies View RelatedRunning F14 on Dell Studio 14 with LCD screen and US keyboard selected. After initial power on the keyboard selection of "Windows Key" + F4 will dim the screen and the "Windows Key" + F5 will brighten the screen. When being used, either combination will also show a meter on the screen to display the adjustment of the brightness. When the lid is closed the computer is set to suspend by default. After the computer is brought back from suspend the keyboard short cuts no longer control the brightness and the meter does not appear on the screen. I have not found any other way to control the brightness and I have to restart to get the keyboard short cuts to work again.
View 5 Replies View RelatedHow do I adjust the brightness in Gnome?
View 9 Replies View RelatedI have a low end 7" CnMBook running modified Debian OS. Is there any way to adjust the screen brightness, if possible by adding a Fn command Up and Down?
View 4 Replies View RelatedResearching this problem, I find very often this solution:
Code:
echo -n 100 > /proc/acpi/video/VGA/LCD/brightness
Unfortunately, I don't have that on my old PC:
Quote:
ls -F --group-directories-first /proc/acpi/
button/
[Code].....
I just cannot adjust the brightness. When I use Gnome bar's brightness applet or the combination of keys on my laptop,the bar moves but there is no effect. Its too bright for me, I am getting blind for real.
Acer Aspire 5742g
NVidia GeForce GT540
No proprietary drivers detected
Ubuntu 10.04 LTS 64bit
When I first install debian I couldn't change the screen brightness at all not manually nor with function keys, but I tried some of the solutions I found on the internet and now I can change the brightness manually (from the power management or the battery icon) but when I use the function keys it takes them like 2 to 3 minutes to respond and cause the system to hang (even mouse curser not responding) and then I'm forced to manually reboot the system, here is some information :
Code: Select all$ ls /sys/class/backlight/
acpi_video0 intel_backlight
Code: Select all$cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
[Code] .....
And I've tried this:
Code: Select allsudo -i kwrite /usr/share/X11/xorg.conf.d/20-intel.conf
And I add the following in this file
Code: Select allSection "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
dont say xgamma, i need brightness/contrast not gamma
View 2 Replies View RelatedI have acer Aspire 5742 with mint 9 {64/32 bit both} installed.. I cannot adjust brightness of my laptop in any of them.. The shortcut keys are working fine as increasing or decreasing through keys show icon increasing or decreasing brightness but it is not affecting brightness in anyway.
View 2 Replies View RelatedI have just upgraded to xubuntu 10.04 and although some function keys are working (like volume control), the screen brightness function keys aren't (the screen brightness is at top level and can't be reduced)Notes:I am using a Compaq 610 laptopThe brightness keys are working on Ubuntu 10.04 (live session)How can I fix this?, and at least is there any other way to adjust screen brightness?
View 9 Replies View RelatedI'm writing a script to toggle LCD backlight on my laptop between minimum and previous/current level. I will then assign this script to a button. For this I need to be able to adjust backlight by using some command line utility. Also, this must be possible to be performed by a regular user.
What I have already tried:
1) The "xbacklight" utility. This didn't work. Program reported something like "no outputs found".
2) Used "acpitool -l <backlight_level>". This didn't work either.
3) The "echo -n 100 > /proc/acpi/video/VGA/LCD/brightness" works only when I am root. Changing permission of the file to allow writes by a user only valid until reboot. After reboot I need to change permission again, so this approach is not good either.
What works on my laptop, but with GUI:
1) Adjusting LCD brightness in "System->Preferences->Power Management" works.
2) Adjusting brightness with Gnome Brightness Applet works. However, after changing brightness with applet it says "Cannot get laptop panel brightness" and shows red crossed circle icon. Even after applet shows this message, it is possible to change the backlight level. It seems like the brightness level cannot be retrieved by the applet/system, but it can be set.
I can see that it is definitely possible to adjust LCD brightness through software because of the 2 things above, but how do I allow any user to change it from command line?
So, what are my other possible choices for changing backlight from command line?
Long, sad story made short. I have a Samsung Netbook running Windows XP Home, SP3. I set it up to dual boot with Ubuntu, just so I could play around with Ubuntu. Well, Ubuntu started giving me trouble: my internet connection went south, I was unable to adjust the brightness of the Netbook screen, etc., and when I looked for troubleshooting help on the internet, it was all Greek to me as it involved working with Terminal.
I did a search for removing a partition in Windows XP and found "How to use Disk Management to configure basic disks in Windows XP" on the Microsoft and followed the instructions there.
[Code]...
I want to know how can I increase the brightness of my LCD screen. I have a toshiba sattelite A500-1f4 laptop with nvidia geforce gt 330m video card. I work on centos 5.6 x86-64 system.
View 3 Replies View RelatedCan anyone recommend an application that will automatically dim my monitors when it gets dark at night?
View 2 Replies View RelatedCan't adjust brightness of display on buttery power mode Have no controller, such as in the tab "On AC Power"
View 4 Replies View RelatedSometimes while watching ..... vids in firefox I often want to adjust the brightness/contrast/saturation levels.I didn't see any addons for the purpose.Is there a way to do this ?I have visited web sites with embedded flash players which includes these controls.
View 2 Replies View RelatedI Install Ubuntu 9.10 and I can't control Brightness, show brightness popup (Fn+F5F6) but screen brightness don't work, I install NVIDIA Driver Linux-x86_64 version 190.53, modiffed xorg.conf.
View 9 Replies View RelatedI'd been trying to get into Linux before I bought it so I figured that I would try to get it onto my new Mac so that I could use it wherever I am. I decided to try Debian Lenny 5.0.3 a whirl after reading about all the different distros available. I've successfully installed it and I can get to it with rEFIt, and I have quite a few things working such as the video drivers and wifi. However, I've had trouble getting it to a level where it'd be usable away from home. Here are the main problems I'm worried about:
1) I installed pommed but I still can't use the brightness keys to change the screen brightness. I'm not sure if there's some other workaround for this?
2) I tried some recommended power management packages (gnome-power-manager) but it doesn't seem to be accessible or functional right now. I don't have any way to control it or get to it that is obvious to me. Is an icon or anything supposed to appear on the task bar when you install or what? Getting some sort of power management on here is important because it gets really lousy battery life otherwise.
3) Being a Macbook, there's no right-click button. Multitouch would be really nice (two-finger scrolling!) but I'd be OK with ANY way to right-click with the touchpad. I have a wireless USB keyboard/mouse combo that works at home at least . . . right out of the box too!
4) I've seen some packages called the Mactel PPA, but they are made for Ubuntu. Since Debian and Ubuntu are so similar, is there any way to make those work on Lenny? I think that if I got those to work, I could fix some of the problems above. Or do I have to install Ubuntu?
5) I just noticed that the sound doesn't seem to work yet either.
I'm having a really strange problem, when I turn on openSUSE, the brightness is fine.owever, as soon as I log in the brightness gets obnoxiously low. I have a MacBook Pro 7.1 with openSUSE 11.4 KDE
View 5 Replies View RelatedI have just did a fresh install of Ubuntu 10.04 to a computer with a generic, low end, on board graphics card. It will not allow me to change the resolution to something other than 800x600 or lower. 8.04 allowed me to set the resolution to as high as 1600x1200 using the same monitor/graphics card.
View 4 Replies View RelatedI know many apps have their own independent volume controls, but not all do. Is there any way to control this in a similar manner as Windows 7?
View 4 Replies View RelatedOn last boot it was fine but now it is showing 800X600 which is too low . How to adjust it
View 9 Replies View RelatedIf one right-clicks on the date and time tab in Ubuntu 10.10 desktop, then there is no obvious way to change the time. If one right-clicks and goes to help, then the explanation for changing time is as follows under the category 'usage':
2.3. To Adjust the System Date or Time.
To adjust the system date or time that the Clock applet displays, perform the following steps:
1. Right-click on the applet, then choose Adjust Date & Time.
2. Type the root password, then click OK.
3. The Clock applet starts the system tool that sets the system date and time. Use the tool to adjust the date and time.
The actual way to do this is as follows:
Right-click on the date and time applet. select preferences, and down at the bottom of the window that opens push the 'time settings' button.
Then you will be able to adjust that date and time.
I'm having trouble with my mouse wheel. On one click, it pulls down to the halfway point. This leaves me with either dragging the bar around on the right hand side, or using the touch pad. this is a new (to me) notebook, which I haven't had for long. I just can't find where to adjust the sensitivity.
View 1 Replies View RelatedDoes anyone know of a way I can adjust the size of a partition in KDE down to the exact size of the files on it so there is no blank space?
View 4 Replies View RelatedI want to adjust clock in ubuntu. When I installed it it asked about location and setting if for asia it automatically take the clock, but that timing is not correct. It showed 10 pm when actually it was 5pm. After installation I tried it to adjust but it could not be managed..it automatically took that previous timing.
View 4 Replies View Relatedwhy both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
View 4 Replies View Related