Ubuntu :: Can't Load 10.04 After Installing Fedora?
Jul 26, 2010
I download the latest Fedora live disc to try it out for a little while. I decided to install it to my hard drive to have both Ubuntu and Fedora. I went through the process and had it compress Ubuntu (I guess it moved the files together but I'm new to this so I can't be sure.) Now when I have the startup screen to pick either Fedora or Ubuntu, Fedora works properly but Ubuntu gives me Error 13. It can't find the kernel. I went into the command line and went to where I knew Ubuntu was saved (hd0,0 and Fedora is hd0,2) and ran cat /etc/issue to check that it was there (read somewhere online to do that) and it returned with: Ubuntu 10.04 LTS
l
I think all I have to do is edit the pre-boot options or something, as they are way different looking than Fedora's and I think they may just be insufficient.
I have recently changed cpus in my dell e520 from a Celeron 346 to a core duo q6600. after switching the two I can no longer access my 32-bit Ubuntu 10.1 partition, the splash screen loads and then after that a garbled mess of pixels appears that somewhat look like my windows 7 desktop.I have already tried reinstalling Ubuntu by usb as well as cd, but to no avail. I have also tried installing mint-Linux 10, but only to have the same problem.
ve got this issue.The history of this notebook is:came up with windows vista preinstalled with a recovery partition.Installed windows 7 without removing the vista recovery partition. While doing this partitioned the hd in this way:
/dev/sda1 recovery /dev/sda2 windows 7 /dev/sda3 backup space (ntfs)
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start then this $ /etc/init.d/httpd graceful
I had to erase a swap partition on a hardrive that has ubuntu in order to install windows xp on another hardrive. After I did it win XP loads on both hadrives. How do I get to Ubuntu and how can I make another swap without having to reinstall the whole ubuntu?
After installing Ubuntu in a partition of my HD, I cannot load Windows XP. It hangs in the logo page (the blue tracking keeps moving forever). When I try Safe Mode it hangs in the I have read many posts in this and in other forums, but could not solve the issue yet. I am posting here my Boot Info Script's results:
[Code]...
My Windows installation is in /dev/sda1, and my partition with all my files are in /dev/sda5. I am not sure if that is supposed to be that way, but in the "Drive/Partition Info" section it say sda1 starts at 63, while in the "Boot Info Summary" section it say that sda5 "starts at sector 63" too.
Now I installed Opensuse on my system which already had Ubuntu 10.04 and Windows 7 on it. Whilst Opensuse's replacement Grub correctly identified Windows as an alternative system it did not do the same for Ubuntu. I've been tinkering around in menu.lst (after taking back ups) and I can't ever get Ubuntu running - I either get a Grub error 15 (file not found) or error 17 (unable to read partition). By booting on a live CD I can see that all the information is still there, I just can't for the life of me figure out how to get to it from Grub! Did Opensuse move the partitions around during install?
I decided not to use Photoshop in wine on my computer but to only use GIMP because I heard there is so many free plugins on the internet that makes it function almost exactly as Photoshop.I install plugins but then GIMP wont open at all.I did a complete fresh install of 10.04 because I was having this GIMP problem after installing gimpshop and installing Photoshop 7, I figured it was the Photoshop that caused the problem
So now with a complete fresh install GIMP still wont work with any plugins installed.is there something i need before I can add any plugins or whats going on?
I have Windows 7 on SSD and have installed Ubuntu on a separate HDD. When the PC boots, I get the boot manager menu, if I choose Windows 7 it fails with error "no such device or partition".
I can mount the SSD and see all the Windows files still there, I think that the boot manager just needs to be pointed in the right direction but not sure how.
I am trying to setup a computer with xubuntu 10.10 for my dad. It is mostly working, but flash animations/games run somewhat poorly. I think I might be able to fix this by using the non-free nvidia drivers, but I cannot seem to get them installed.
Sysinfo reports that the video card is an nvidia geforce mx200, so I downloaded the nvidia 96 driver package from the repositories, ran the configuration program, & rebooted. As you may guess, x did not load.
I have been working on this intermittently for a few weeks, & I do not remember everything I might have tried to fix it, but here is what I am sure of:
Sysinfo reports that the video card is an nvidia geforce mx200
when i try "sudo modprobe nvidia," I get the message "FATAL: Module nvidia not found." "sudo modprobe nvidia-96" gives no such error.
When I check the Xorg.0.log, I find:
The nouveau driver does not seem to work either, but if I remove the xorg.conf file, x works okay. How to get Flashplayer running more smoothly.
I reinstalled fedora the other day, and it's been working just fine, apart from the internet. It shows that I have a full connection with the wireless network, but it's really difficult to actually load a page. 80% of the time it just fails and shows "Page Load Error". It's really frustrating because it is connected to the internet. In fact, the icon in the address bar even loads from the site I try to access, but websites just will not load.
I've tested my wireless internet with another laptop which is running vista, and it works perfectly on that. Also, I'm running Fedora 10 on an Acer Extensa laptop.
I want to load grub2 from grub4dos.I want to load directly the grub2 core. I know how to load first 512 bytes from some patition by chainloader and load grub2, but what I need is to load directly grub2 core without passing by bootstriping code (first 512 bytes).So, my first boot manager is grub4dos, then I can load grub2 and later I load Ubuntu. But I think I have to edit --set-root What I dont know is how.
In hdd 0,7 (sda8) I have Ubuntu 10.10 and /boot/grub/core.img is in sda8 (hd0.7)
I tried this way:
Code: title grub2 find --set-root /boot/grub/core.img kernel /boot/grub/core.img
I dual boot XP and FC14 and have 2 routers. I can connect and ping one of these routers when I'm in FC and I have an IP address I just can't load any websites. When I connect to the other router (my main router) it works fine. When I boot into XP and connect to the problem router I can load pages fine. It's only when I'm on FC14 and connect to the problem router that I can't load pages even though I have an IP and can ping around.
while installing ubuntu i made two partitions and set two load points. //home/but in ubuntu there is only one partition shown(filesystem).. what is going on?
I have attempted to install two versions ubunto & mint from OEM cd, ISO and VM and get the same results the load page flashes then disappears (no signal) I can hear it finish loading (startup chime) can someone help without doing bios hacks as I'm not that experienced in that area!
I'm trying to install new themes on ubuntu but it tells me that GTK + themes 'ubuntulooks'is not installed and won't load up the themes as it should. I went to package manager and installed it but still doesn't work. Themes to be installed, either overglossed or sickness-black. environment ubuntu 10.04.
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts). Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I noticed my Firefox loading rather slow (took around 5 - 7 seconds to load and navigate pages, even google, and it would sometimes become unresponsive), I thought it may have been a addon problem, so I opened up a new Firefox profile with no addons but the browser crashed upon loading the certain page I was trying to view, and I figured I'd look into it later and use Chromium for a while (I'll be open, I was trying to watch an pron tube site, and when your, you know, you don't really feel like stopping to go technical and try to fix it or whatever), but Chromium said that the flash player wasn't installed. I thought it was kinda odd, but then again I didn't want to go technical and thought maybe since mozilla firefoxs engine loaded the flash, I'd use Mozilla Seamonkey which uses the same gecko engine. The flash wasn't working either on there.
I tried looking up to see if there was a 64bit deb package for flash, but they didn't have it, and I seen someone mention that doing the 'apt-get upgrade' upgrades it, so I did that, and it also said it installed some extra packages when doing it, but I figured it was just that getlibs grabbing the extra dependencies and went along with installing them (after all there shouldnt be much to lose since its from the repository, right?)
I restarted the computer to give the updates a chance to take effect (it didn't mention to restart, but I thought I'd go ahead and do it anyways to ensure it updated okay).
This is where the booting problem comes in: When my laptop restarted, the loading was going across very slowly (I have ubuntu studio installed through regular ubuntu, so it was showing the text filling up), normally it would just fill a little bit of the first "U" in "Ubuntu Studio" and then be done quickly, but now it goes slowly all the way, and when it fills "Ubuntu Studio", it stills stays there, it doesn't load on.
I pressed the down button to see the terminal and it says this: Code:
I have no clue what to do now, and I wanted to ask for help before I go trying myself editing the command line boot process.
I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. This generates a "Linux Printer Package Setup" pop-up screen.The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
I recently installed Fedora 12 on my Toshiba Tecra laptop. It worked fine for a few days, then I uninstalled xscreensaver because I use gnome screensaver. When I rebooted, the system hung at the splash screen. I booted to the command line and did a Code:yum install xscreensaverand rebooted. However, X failed to load again. I have attached my complete Xorg.0.log as a "doc" file. Here is the some output that may be relevant:
Code: (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device.
I have gnome which is the DE I always use, but today I wanted to try KDE so I did a 'yum install @kde-desktop', the installation went ok, so I rebooted just in case and logged on a KDE session, the animation for loading was displayed and when it was finishing it went back to the login window instead of loading the desktop. If I try the KDE live CD, on other computers it shows the desktop right away but on mine it sends me to the login window and the same, looks like its loading but it sends me back.
Gnome keeps working ok, I can even launch all KDE apps installed like Dolphin and stuff but can't run a KDE session, does KDE 4.X have a special hardware requirements?.
I am testing on Sun Virtual Box.I have 2 IDE Hard Disks
Primary Master Secondary Slave
I have Windows on Master. I am using NTLDR as the bootloader and have 2 options in boot.ini 1.'Windows' 2.'Linux'
'Linux' is a 512byte file dumped from the 1st sector of the secondary hard disk using dd.Should this work or does Grub take up more than the '512' bytes magic sector that MBR's should use?My problem is when I click Linux I get the letters GRUB in the top left of the screen and than nothing, I have to reset.I am all out of ideas as to why this is not working, by all reports I have heard Grub is supposed to be 'the best boot loader' and 'windows sucks etc' but I cant get Grub to load Linux.I have re-installed about 10 times changing settings but nothing works. The only thing left to do is tick the box to write the boot loader to MBR, no!!
F12 + Samba4, services smb and nmb set to run at levels 2345 - after reboot, I need to manually doservice nmb restartin order for all machines on the network to "see" the shared folders. It appears that service nmb does NOT start properly, as when above command is entered it shows "FAIL" as message for stopping the service.
