Since I upgraded to 10.10 my Canon camera is not detected when I plug it in.
This happened a few years ago and I was able to downgrade libgphoto2, but when I tried that this time I ran into dependency problems. When I returned to the version that comes with 10.10 it worked once then failed ever since.
I'm having some problems with Ubuntu 10.04 64bit finding my digital camera (Nikon CoolPix S4000). For whatever reason, when I plug in the camera via USB connection, Ubuntu will not detect it. The odd thing is that on my old Ubuntu 9.04 32bit install my camera was detected fine (it appeared as an icon on the desktop, akin to a flashdrive or any other mounted drive).
View 7 Replies View RelatedI installed skype on my linux distribution (Linux singh-VGN-CR35G-L 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 i686 i686 i386 GNU/Linux) but when i make video calls the camera doesnt work. I checked with the lsusb command ...it confirmed the availability...even when i Tried to run Cheese..it gave me error "No device found"
I installed luvcview and when I Tried to run it...it gave me following error....
SDL information:
My previous laptop died (HD failure, etc.) so I just put F15/LXDE on a Dell Latitude D610. All updates applied. I inserted my Canon Powershot A480 in a USB port, but o/s doesn't seem to react. No desktop icon, no FileManager presence, nothing in /media folder. Other USB devices are detected, mounted and recognized (external HD, memory stick, etc.), but not the camera. what I should do to get the camera recognized?
Edit: DigiKam and Digikam libs are installed and system was rebooted. Still no camera detection.
I am a newbie. I have a Dell Vostro 2510 running XP. I have virtualbox and installed ubuntu 10.10 aS guest.
The one issue I seem to have is i cannot get my webcam to work. I searched everywheres for some tips on what do to, but nothing seems to work.
I installed both Cheese and Skype. The camera is not even detected.
Have logitech camera, seems to be detected initially, but dropped later for some reason.
[Code]...
I am new to Linux, and have started using Ubuntu 9.10. everything seem to be in place except for the Web Cam. i think it is not being identified by my OS. i have tried Ekiga, but still of no use. i am using a Compaq Laptop with an inbuilt camera.
View 1 Replies View RelatedThis device doesn't automount, doesn't show in KDE 4's device notifier, and I can't mount this camera manually because it doesn't appear to get assigned to a device node. Any known solutions? It worked in Slackware 12.2, but not in 13.0 or 13.1.
View 2 Replies View RelatedI had my Canon DV camcorder working well with Kino for capture in Fedora 11. I upgraded to F12 recently and tried to capture some video tonight. It does not seem to even recognize my camera.My card: 02:08.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 04)My kernel: 2.6.31.12-174.2.22.fc12.i686.PAEI read somewhere about installing ieee1394 kernel modules from ATRPMs and rebuilding the kernel but
View 1 Replies View RelatedI was looking to iphone and i was surprised the quality of such tiny camera.
Is there any alternative camera for my laptop to have similar or much better then the one in iphone? So that i can use it from my laptop, but have very sharp HD quality with maximum megapixel + highest frame per second.
I'm using Ubuntu 10.04 LTS and I'd like to upgrade to 10.10. I tried following these instructions:
[URL]
But the message notifying me of the upgrade does not appear after I install all of the 10.04 LTS updates. I've tried quit and relaunching the update manager and clicking "Check" a few times, but nothing has popped up. Is there some setting I need to have configured right somewhere?
I've upgraded a P4 system from 8.04 to 10.04 and it hangs on boot saying it can't find root (/dev/md0).ALERT: /dev/md0 does not exist.I've added rootdelay parameters in case it was a timing thing and cat /proc/modules shows raid1 etc. (although no md ??).I noticed the md and raid1 modules weren't in the /etc/modules and /etc/initramfs-tools/modules - so i added them and did a: mkinitramfs -o <name> 2.6.32-22-generic
Oddly at the initramfs prompt when I type "reboot" I see it flash up with syncing md devices (or similar) just my /dev/md0 and /dev/md1 are not in the /dev partition (although the individual devices are - /dev/sda1 etc.).
My USB devices are being detected when I run the 'lsusb' command.However there is no driver that is set to the device.Also the /dev/sdX device is created so there is a mount point
View 1 Replies View RelatedAfter upgrading to 11.04 everything went fine for almost 6 weeks. Now the keyboard is no longer detected. It happened overnight, without any updates or changes. Mouse is working. (Partial upgrade from 10.10, desktop computer)
View 3 Replies View RelatedI'm using an external Cambridge Audio Dacmagic with F12 and Amarok. This worked great, until I upgraded Fedora this morning. The Dacmagic does not appear anymore in the Multimedia Audio Systems settings, only Pulseaudio is shown. However, in my hardware info widget, the Dacmagic does appear? This is shown as "C-media USB Headphone set". Now I'm totally lost. I did restart Fedora with the Dacmagic on, I did restart the Dacmagic with Fedora running, but nothing changed.Any good suggestions on what I can try next--- Post added at 04:47 PM CST ---------- Previous post was at 03:05 PM CST ----------Isn't the net fun? Poking around, I found I could try "lsusb". The output gives:
[root@Mediacenter ~]# lsusb
Bus 004 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I am running Fedora 14 64 bits on a Thinkpad 510:
2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
I installed 6 GB of ram. My bios is detecting the 6GB but my OS is only using 2.9GB.
cat /proc/meminfo:
MemTotal: 3013448 kB
MemFree: 64704 kB
Buffers: 10516 kB
Cached: 438716 kB
SwapCached: 127460 kB
Active: 2033756 kB
Top:
Mem: 3013448k total, 2951100k used, 62348k free, 11128k buffers
Swap: 5111804k total, 653136k used, 4458668k free, 437464k cached
The kernel is likely not detecting all the memory. Is there a workaround/patch available for this issue?
I am using Ubuntu 10.04. The Tata Photon+ card Huwai EC1260 was working flawlessly. However, I recently did a firmware upgrade on the card that was provided by Tata Indicom for it to work on Windows 7.
After that, the card is no longer detected as a mobile modem in Ubuntu. If I try to add a new connection, all options are disabled (whereas earlier Tata Photon card would appear automatically).
The product ID has changed. What change can I make to Ubuntu to enable it to detect the card again.
I am running -current on an ASUS eeePC 1000HE. Wireless was working fine up until the time I applied the latest changes from the Slack -current tree, which upgraded wpa_supplicant. Now, no networks are detected.
I looked at some related threads here and did some basic checking: neither the eth1 nor wlan0 interfaces show up in iwconfig or ifconfig output. Am afraid I am still a wireless dunderhead and don't know where to start troubleshooting this issue.
No wireless after upgrading to linux kernel 3.0 in opensuse 11.4. I'm using Kde and gnome 3, everything was working fine under the 2.6.39 kernel, but now both only detects my wired connection. Any help resolving this would be greatly appreciated. I have a Netgear WNDA3100 adapter that uses the Atheros drivers. It also is no longer detected in my Fedora 15 after upgrading the kernel, but it still works in Mint 11 with the 2.6.38.8 kernel.
View 9 Replies View RelatedI plug my camera into my computer and a window pops that says a camera has been detected. There are two buttons, "Ignore" and "Import Photos". I click on "Import Photos" and nothing happens. I'm wondering if I can just navigate to a folder where I might find the pictures, kinda like /media/cdrom/ to get to a cd.
View 6 Replies View RelatedThe camera is plugged into the usb port. But nothing is happening. I do not have a cd or anything with the camera. Is there any way to make it work?
View 2 Replies View RelatedI recently did an upgrade to ubunut 10.04. I have a nikon d70 that I plugged into the computer to download the pictures off of but to my surprise my computer no longer sees the camera. I did a search and found a few threads about USB cameras and skype but nothing about this issue. Is there anyone else having this problem?
Is there a fix for it? So far everything has been working OK with UBUNTU 10.04 I would hate to go back to windows xp only because I am not able to download the pictures from my camera.
Can I run this camera:
Quote:
Bus 001 Device 007: ID 046d:0809 Logitech, Inc
as something other than a UVC driven camera?
It appears that UVC in 640x480 format is only available at 15 fps. I need to record at fps=30. So I can splice into existing video.
Code:
#!/bin/bash
##Turn on webcam and save video and audio output to file.
# check if there is no command line argument
[Code]....
I just got a new Olympus FE-47 and the CD is in DOS as a PDF. I have not been able to figure out what program in 10.10 will open and auto run it.
View 9 Replies View RelatedI have a Samsung Digimax S600 camera that I'd like to use to download pictures to my ubuntu v 8.04 LTS with all the latest updates.
However, there doesn't seem to be an application that will work with my camera. I've tried Camera, gtcam and Digital Camera that gets loaded while installing the version. gtcam and Digital Camera have an option for a Samsun Digimax 800 but none for my camera.
Does anyone know of an application that has my camera as an option.
Bob
I want to add a web camera and microphone to my desktop 9.10, what seems to be the best combination for Linux? I don't necessarily mean the best but a good affordable model that works.
View 3 Replies View Relatedi have camera webcam on my laptop..but it didn't work.
how to install correctly with the right step?
I have ubuntu on one laptop and arch linux on another. Ubuntu allows me to easily take photos from my camera and put them on my laptop. Arch does not, even after I've installed the "necessary" software.
What is it that ubuntu has that allows me to do this? I'd like to know, so that I can install it on arch.
picasa & digiKam can connect & grab pix/vids+ i can see my files in dolphine with the path
camera:/USB PTP Class Camera@usb:/how do i get to these files from the command line ?i'd like to process new videos with a scriptbut for now i'm having to use the GUI to copy locally... then run my scriptmy setup (though probably irrelevant): kubuntu lucid + a new shiny iphone4 (preloaded with 4.0.2, so not JB'd, yet ... otherwise i'd just SCP the files over)
Sony DCS-W55 not working with Shotwell, i had no problem with Canon S80, but Sony gives out USB ptp class camera is there any way to mount USB ptp class camera on Ubuntu.
View 2 Replies View Related