I need to boot into a Windows XP installer CD from GRUB. How can I do this?
(The reason is that I need to use drivemap to install to a secondary hard drive.)
Are there any viable workarounds? For instance would installing to the primary disk, copying to the other disk, and then using chainloader to point directly to ntldr work?
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
Not sure if this is the exact right spot for this post, I've got an .ISO file of windows 7, but no DVD's to burn it to. I've read that I should be able to use GRUB to boot, but I can't exactly get it to work. I've been poking around the map function trying to sort of mount the iso somewhere within the hard drive, but I'm not sure if that's how it should be done.
View 3 Replies View RelatedI recently installed Ubuntu 9.10 and when i rebooted, GRUB fails to boot to windows. What exactly happens is that when i select Windows, it simply goes to a black screen with GRUB at the top, and a blinking cursor (that accepts no input) Summary:I am running Windows XP Professional No, i do not have the Windows disk My hard-drive has been partitioned between Ubuntu and Windows I have Ubuntu 9.10, which boots normally Windows failes to boot, and hangs on a screen that says GRUB _ I am a total linux noob I dont want to simply rewrite the mbr as i still want to be able to dual boot. I have important data on the windows partition that i want to keep.If you want any logs/info, you'll have to tell me EXACLY how to view/capture them
View 6 Replies View RelatedEvery time I use GRUB to boot into Win7, I can't reboot back into GRUB or Windows. I think Windows is forcing itself into the MBR then proceeding to corrupt it. I believe I can just boot into a Live session use "sudo grub-install /dev/sda", but that seems like a lot of work just to reboot.
View 1 Replies View RelatedI have to test Ubuntu 11.04 across multiple systems in my company and enable dual booting with Windows Vista PE x86. On selecting the Windows GRUB entry, the Grub menu just loads again without loading Vista and thus enters into an infinite loop.
Fdisk -l gives me:
Code:
When I did a update-grub, the output shows that it detected and added a Windows Vista OS. Also, I went ahead and added "MyWindows" as an option as well which has (worked for all other versions)
Code:
Selecting either of the GRUB Windows entries just loads GRUB menu again. I'm very confused and this deployment is critical for my company.
Right, so I've looked high and low for the answer to this problem and haven't found it, although I've found a million and a half threads about grub especially when it comes to dual booting windows. Which I'm not. What I am though, I suspect, is an idiot who shouldn't mess around with my computer at 4 am.
So the problem is every time I turn on my pc, grub tells me it can't find a file system and goes into recovery mode. Can't boot into ubuntu at all. Am using the live disk to type this.
I also think I know why grub is doing this, I was dual booting windows before, I had windows installed originally, added ubuntu to a new partition. Was having problems with grub. Figured that reinstalling it wouldn't be a bad idea, it might fix it. In that process I did something rather stupid, I accidentally installed grub to my other internal hard drive. There is no operating system on it. Just movies, music, etc. The problem, I think, is that my second hard drive is sda, and the one with my os is sdb, which I suspect means that grub is loading from sda and finding no operating system, rather than from sdb. (It's like that because my larger drive wouldn't fit into the sda slot on my computer, long story.) How do I remove grub from sda?
I will like to triple boot Ubuntu, XP and Windows 7, but I already had Ubuntu and XP running on separate HDDs, Ubuntu was installed first, then I installed XP on a separate HDD (with the Ubuntu HDD disconnected), now I did the same for Windows 7, I disconnected all other HDDs (Ubuntu, XP and Data)and installed windows 7 on a separate HDD.When I connected everything back(Ubuntu HDD, XP, Data HDDs and Windows 7 HDD, Windows 7 does not appear on grub boot menu and now Windows 7 does not boot up by it self.
Is there a way to simply add Windows 7 to Grub so I can have all 3 OS's on grub menu?Can grub search HDDs to look for OSs to add to the menu?Funny thing is the XP entry on grub appeared by it self, I've never edited grub to add XP on the booting menu, I was booting directly to XP by going into the BIOS and selecting the XP HDD as my booting drive instead of Ubuntu HDD, somehow XP was added to the grub booting menu.
I recently had to reinstall windows on another partition on my hard drive due to there not being any good way to run unrealed under ubuntu (believe me, I've tried everything) Is there a way to install grub from windows without using a liveCD or booting to a USB? I have downloaded WINGRUB and to be fair I have no clue how to use it.I no longer can access my Ubuntu partition.
View 1 Replies View RelatedI have been mucking around with Linux on and off for a while now, but this is the first time I have used a Debian distro. I have to say, it's been a pleasurable experience with it all going easily from install to now. I installed it to my external WD 1tb drive. It worked first up not a worry in the world. I have 2 internal drives also and when the installation of Debian was finished I had a GRUB with all operating systems duly noted. I was able to choose at start up between my Windoze 7 on HD0 and my PCLOS on HD1 and my Debian on HD2. (sda, sdb, sdc).
I noticed today as I was booting into Debian that the Windoze option was gone from the GRUB. I thought I'd put my trusty GRUB disc in, reboot and have the issue sorted in no time, as I have in the past. No such luck. After trying almost every option on the super grub disc I have a list of errors, 15 file not found, error 6 mismatched, error17 can not mount and error 12 invalid device. The only thing I can crank up now is windoze and whilst I have had a pretty good experience with win 7, I would like to have the option of choosing between the 3.
I have recently (today) installed Debian on a logical partition of my master hard disk, but when booting it will just list Debian or Debian recovery not listing windows at all. I know there may be some that will think that is a good thing but I do need access to windows.
I had a root about and found this thread which I thought might solve the problem as it is similar:
viewtopic.php?f=17&t=63601
But when I got to the part where I entered the command su -c "nano /boot/grub/grub.cfg" the terminal prompt changed to a > and I felt a little unsure of what I was doing as I would have prefered to have opened the grub.cfg file as a text file, as it is I recieved a syntax error.
As you can probably tell Linux to me appears to be a bit of a black art, but I am enthusiastic none the less. I will list the output of the terminal window so that you may see the steps I have taken.
anthony@Debian:~$ su -c "grub-mkconfig"
Password:
Generating grub.cfg ...
#
# DO NOT EDIT THIS FILE
#
[Code].....
I wanted windows to appear first in my grub2 menu so I renamed the 30_os_probe file(or whatever it felename is) to 09_os_probe so that it comes before the 10 linux file, problem is whenever these files get updated the updater is unable to find the 30_os_probe file since I renamed it and recreates it... leaving me with two versions (09 and 30) with 09 being of course outdated.
The updater also fails to run update-grub and instead attempts to update grub.cfg manually... and fails. I had to manually do a sudo update-grub.
Is there any way to fix this so its all updated automatically while leaving windows the top choice? No manual intervention required beyond clicking "install updates"?
Also, is it possible to JUST have the Windows and Ubuntu choices, no Ubuntu recovery, memtest, alternative(older) kernels for Ubuntu, etc in the grub menu?
Recently I installed Debuan "jessie". I previously had Windows 8.1 and Xubuntu installed. After installation Debian installed it's own version of GRUB, with entries for Debian, Xubuntu and Windows. The problem is that after I selected Windows when booting, GRUB menu no longer appears. It boots straight into Windows.
It's lenovo Ideapad z510 laptop, with special button that allows me to select between 4 options before booting - one of them is "Boot menu".
I didn't use it before windows "removed" GRUB, but now there are 2 options: Windows boot loader and Ubuntu. When I select Ubuntu it loads my old boot menu (from before installing Debian).
I thought that when I use update-grub from Xubuntu I will at least eb able to boot into debian. After I did that Debian option appeared in the GRUB menu, but it didn't work - black screen.
How to get GRUB menu working again (and avoid replacing it by windows boot loader)?
My Laptop Config is as follows.
Compaq Presario V3700
AMD Turion64
2GB Ram
Windows Partitions
/dev/sda1 == C: (WINDOWS)
/dev/sda2
[Code]...
I have been carrying out updates of both Vista & SuSE whenever i operate in them.
One (Not So) Fine Day, when i Choose from the Grub loader "Microsoft Windows Vista SP2" option it just din't boot into Vista. I have Tried many a time.
My First doubt was towards Vista only, so i choose the "Windows Recovery Mode" option from Grub. It went into the Recovery mode. I ran Memory Tests on Windows Partition, took its own sweet time, whatever missing indexes and all it carried out and finally gave the Thumbs Up result. After that, i carried out Startup Repairs, all came out well. So, Yet again i restarted and tried to get in Vista. Nope, dint work.
I've been trying to get a dual-boot system with a truecrypted Windows partition and grub 2 in combination to work successfully and to date, I haven't had much luck. I'm using the grub 2 version from Ubuntu 10.04.2 LTS.I understand from searching through Google that there is presently no easy way to chainload the Truecrypt boot loader from Grub 2 in a similiar way that was done with Grub 1. This is because the Grub 2 payload is much larger and actually overwrites some of the Truecrypt boot loader, preventing it from starting.Does anybody know what might be going wrong here? I've been looking for ages now and can't seem to find any solution to this problem apart from restoring the Truecrypt loader to the hard disk and trying to chainload Grub 2 from Truecrypt. I'd rather use Grub 2 as the main loader though as Ubuntu Linux will be the main operating system in use.
View 7 Replies View RelatedI have just updated my Ubuntu linux to Ubuntu 10.4, not my grub menu isnt letting me boot to Windows Partition.The problem seems to be with grubs new update from using an editable menu.lst file to using a non editable grub.cfg file. Everywhere I look it states "DO NOT EDIT THE GRUB.CGF FILE". I am at a loss as what to do. I figured that the new configuration has screwed up the Windows Boot File. Anyone have any suggestions on how to fix this. I am not sure if it is a windows issue or an issue with the Grub boot menu.
View 2 Replies View RelatedI have a Dell Studio laptop, which I am trying to make dual boot and in big trouble. These are the steps I completed.
1. Backedup all my important data on a USB drive.
2. Prepared a Ubuntu LiveUSB and booted in Ubuntu.
3. Used GParted tool to repartition my hard drive (320GB) as follows,
Partition 1 NTFS (Primary) ~50GB
Partition 2 NTFS (Primary) ~100GB
Partition 3 EXT4 (Extended)
Root EXT4 (Logical) ~20GB
Swap Linux-swap ~2GB
Home EXT4 (Logical) ~129GB
4. Accepted all these changes in GParted and restarted the machine.
5. Used VISTA installation disk to start VISTA installation on 1st NTFS partition (Partition 1).
-Everything was fine until now -
6. The VISTA installer took a really long time (around half hour) just showing copying files with 0% completion status message.
7. Somehow I got impatient and tried to cancel the installation.
Now, the problem is the system does not boot up even with my USB LiveCD or Windows VISTA installer. It just shows blank screen and nothing appears.
I am installing Jessie to a dual-boot Dell Inspiron 1150 laptop currently booting Windows XP + Ubuntu 9.04. I downloaded the small installation image:
Code:
Select all//cdimage.debian.org/debian-cd/8.1.0/i386/iso-cd/debian-8.1.0-i386-netinst.iso
and created a live dvd using growisofs.
The Jessie install documentation says: "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from." For the downloaded image this produced the result
Code:
Select all~$ md5sum debian-8.1.0-i386-netinst.iso
095a83b715e1b74b6d30b2259275f4af debian-8.1.0-i386-netinst.iso
There is no MD5SUMS file in the download directory. There is an md5sum.txt file included in the iso image: this lists the md5sum of every file in the image, but not that of the image itself. The check for the burned dvd was successful :
Code:
Select all~$ dd if=/dev/cdrom | head -c `stat --format=%s debian-8.1.0-i386-netinst.iso` | md5sum
645120+0 records in
645120+0 records out
330301440 bytes (330 MB) copied, 1.28047 s, 258 MB/s
095a83b715e1b74b6d30b2259275f4af -
Is this a documentation error ? I next booted the laptop from the live installer dvd. After generating a number of messages, it stopped displaying a message along the lines of: "Invalid video mode - press Enter to select a mode".
I assumed it would wait for me but it soon rushed on, producing screeds of segmentation fault error messages, eventually slowing down to a rythmic display of:
Code: Select all*** Error in Xorg:free() invalid pointer: 0xb7101ce3
***Surely it should have waited for me to press Enter?
I was unaware of the difficulties of installing and booting Ubuntu from the "onboard raid" that the NVIDIA nForce chipsets provide. However, I've managed to get it working reliably with one single caveat:
When update-grub builds the grub.cfg, it refers to all of my partitions as follows:
Code:
menuentry 'Ubuntu, with Linux 2.6.35-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(/dev/mapper/nvidia_caifaefg,msdos5)'
[Code]...
So I'm guessing that the whole nvidia_blah,msdos5 is because of that. However, it doesn't seem to explain why Grub would THINK that would work and it in fact does not work. That's the biggest source of confusion on my part.
My questions are as follows: First off, because as an IT person I want to know: Why does this sort of change work? What does changing that device name change in GRUB's behavior? Is there a setting in /etc/default/grub that would change the way it's naming these RAID devices? Is there a value for this setting that would give me the device names that work, as explained above?
If there is no setting change I can make in /etc/default/grub, could I add a sed command on to the end of update-grub or can I make a modification to one of the scripts in /etc/grub.d? What sort of change would be recommended? How would I preserve this change through later package upgrades that would possibly rewrite these files?
I'm new to linux, and I'm just trying to learn OpenSUSE. I just installed it and I have a few quick questions. #1 I accidentally installed the "OpenSUSE Installer (LOCAL)" on Windows 7, so now I get the option to choose windows or the installer at the windows boot screen. I ended up just installing OpenSUSE on a completely different HD (my original intent) from a burned DVD, so this installer is useless and I don't know how to remove it.
#2 After installing opensuse on my second HD, the boot screen is now SUSE's instead of Windows, and I can choose suse's desktop, the suse failsafe, windows 1, and windows 2. Windows 1 brings me to the windows boot screen with the choice i mentioned above (windows or the local installer i accidentally installed), and windows 2 i assume is my second windows partition which is just my SWAP file, and selecting it does nothing (which would make sense if thats all it is).
My question here is how do I make it so my default boot screen is the windows one with an option between windows 7 or suse? Or would this require reinstalling the system? If it does and its simple enough to explain please do I wouldnt mind removing it and reinstalling at this point, I would just wipe my whole second HD from windows.
#3 I have a netgear adapter. unfortunitly i'm not at home right now and I don't remember the model, so I'll provide that this evening if necessary. What I do know is they do not have a driver for linux. I've found ACX100, but I didn't find my netgear adapter listed on their website. I also found NDISWrapper, but thats for XP and I still don't know if that'll work. I will of course try both unless someone here has a better solution. If anyone knows anything that will work on any netgear adapter for linux please let me know, if not then I'll provide the model later on.
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
I just formatted the partition that contains fedora 15 using windows.. Now when I attempt to boot my PC the grub bootloader comes up and I cannot boot anything.... The error that I get|| i feel i need a boot command to boot boot win7 from grub... grub propmts me " minimal bash-like line editing is supported. for the first word tab possible list a possible commands completion anywhere else tab list
View 1 Replies View RelatedI know this is not strictly a Ubuntu question, but I was unsure where to ask this question and since it is about installing Ubuntu Server, I put this question here.
I have used the Universal USB installer to create an install USB device, but I also need to be able to boot to a DOS prompt so I can update the bios if I need to. I would like to have just a single USB drive rather than having to carry two of them around.
Has anybody used the Universal USB installer and is there a way to modify the resulting USB installer so that I could say add a menu program such as grub or something else that would allow me to either access the installer or go to a DOS prompt? Kind of like the way CloneZilla does or perhaps the gparted Live CD.
I am installing Whezzy and the installer failed to install grub on the MBR of /dev/sda
My disks are
- /dev/sda : the flash drive with the debian ISO
- /dev/sbd : a small SSD for the / partition (sdb1)
- /dev/sdc + /dev/sdd : a software RAID-1 array with LVM for /home, ...
Grub fails to install on /dev/sda which makes sense since this is the flash drive containing the Debian ISO so no MBR.
I already tried to run grub-update manually on /dev/sdb (with chroot /target grub-install --no-floppy --force "/dev/sdb" ).
It works but the system is not directly bootable. I had access to a second PC to read the grub documentation so was able to boot and to fix my system but this is annoying.
Is it normal to see my flash drive as /dev/sda? Could it be that my flash drive is incorrectly detected as a HD?
Is there a way to force the installer to install grub on /dev/sdb?
Is there a method to prevent the grub installer from overwriting the MBR pointer when grub or the kernel is updated? I'm running a multiboot system and when Fedora's grub installs, then OpenSolaris' partition isn't included in the bootlist and Ubuntu's menu line has a chainloader line that doesn't resolve correctly, requiring a hand edit.I may try to do a chmod 444 grub-install , but I'm not so sure what the reprocussions may be.
View 9 Replies View RelatedI have a Ubuntu 10.10 live cd for 32-bit. However it does not work with my system--I am guessing it has something to do with having more than 4 gigs of ram.
Anyway I am wondering if there is a way to install ubuntu 10.10 64-bit with Windows 7 64-bit.
I use to have vista and ubuntu on my PC. Yesterday accidentally I created a new partition "table" the point is that I erased all my partitions on "MyDisk". After a while I decided to re-install ubuntu ( 9.10 karmic koala ) and take advantage of the situation and upgrade to Windows7. Since I already had the ubuntu cd, I installed it first, then downloaded the Win7 cd to install it. The problem is that Windows7 installer doesn't load.
All I get is:
<<BLACK SCREEN>>
Grub loading.
<<BLACK SCREEN>>
underscore
Ubuntu logo
ubuntu login
So I don't know whats wrong. Right now my disk looks like this:
MyDisk >
MyDisk1 ntfs ( For windows 7 )
MyDisk2 > extended (using linux with 2 more partitions: ext4 and linux-swap)
I've previously installed ubuntu using wubi. But this is the first time I've tried installing it directly on the hard drive. I bought a new 320 gig hard disk and divided into 3 partitions of 50gig for windows 7, 30 gig for ubuntu and and the remaining for data. I installed windows 7 on the 50 gig partition. When I tried to install ubuntu using usb boot device, it says no operating system found and all my hard disk is muddled up and I can't see my partitions.
Now I go into live cd mode and see if I can mount my partitions and there I can see all the partitions. I formatted the 30 gig partition which was previously in NTFS to FAT32 and tried to install ubuntu directly from the live cd into the 30gig partition. But still the installer cannot see either my partitions nor my windows 7.As of now I'm using VMplayer and running ubuntu on a virtual machine. But would really prefer to have it installed on the hard drive to derive its full power.
I have a second computer now. I succesfully installed the 'Ubuntu 10.04' 5 months ago but I had to unsintall it because apparently I got a virus when in a google search I clicked one video of cryptozoology (won't tell) and the screen went black or something. For the first time that pc frozen 3-4 times, so I was afraid I got a virus.Now I want to install the Ubuntu again but the Wubi windows keeps asking me for my password to continue.Okay, the problem is that I am using the correct pasword but still is asking me to use the correct one.
View 1 Replies View RelatedI've searched the forums, internet, etc... and I can't seem to find anything on this. I installed Windows 7 using ~70% of my available hard drive space, the other 30% is unallocated. there are two partitions, the 100MB 'System' partition and the NTFS one with Windows 7.
On my first attempt to install Ubuntu: The partitions didn't look right. It detected two NTFS partitions, the first one of 100MB, and a second NTFS partition using ~30% of my hard drive, and 70% (presumably Windows) as unallocated. I decided to go ahead and try to install it over the 30% NTFS partition thinking that maybe the installer just didn't recognize the free space right or something, but after that happened, Nothing loaded and my Windows partition was trashed.
I wiped the drive, and reinstalled Windows again with the 70/30 split. On my second attempt to install Ubuntu: On step 4 of the installation process (partitions) it doesn't detect my Windows 7 installation at all. Instead, it says the disk is 100% unallocated.
Does anyone know why the Ubuntu Installer is not detecting my Windows partition correctly? If so, how can I go about getting Ubuntu to see it and install itself along side Windows?