I have to test Ubuntu 11.04 across multiple systems in my company and enable dual booting with Windows Vista PE x86. On selecting the Windows GRUB entry, the Grub menu just loads again without loading Vista and thus enters into an infinite loop.
Fdisk -l gives me:
Code:
When I did a update-grub, the output shows that it detected and added a Windows Vista OS. Also, I went ahead and added "MyWindows" as an option as well which has (worked for all other versions)
Code:
Selecting either of the GRUB Windows entries just loads GRUB menu again. I'm very confused and this deployment is critical for my company.
i have recently started my masters degree program and i have to install fedora 11 for one of my courses. The problem is when i try to install fedora 11 on my laptop, it wipes out my windows vista installation. I want to keep vista. I have a sony vaio laptop model VGN-FW340D. 4GB RAM and 400 GB HD. i first shrink my hard drive to free up around 100 GB. Then i run fedora 11 DVD and let it make the partitions on my free space.. I have tried everything.. I chose use free space the first time, but i didnt work, it wiped out my vista, next time i chose custom layout and defined boot, root and swap partitions , but again it wiped out my vista.. I have read many guides to dual boot vista and fedora and have carried them out step by step, but nothing works.... Also i dont have vista installation DVD, i just have the recovery CDs, so everytime it wipes out my vista, i have to do system recovery, ive been trying for a week now, and its driving me crazy, i asked a friend of mine to help me out, he has dual boot system, and he tried it and it did the same thing, wiped out my vista... i just have one drive C: with two partitions, one small partitions which contains recovery files, and the rest of the partition has vista.......
when I select Vista/Longhorn from my grub list, it shows a black screen, then shows GRUB again. I recently had to reset my menu.lst, so I'm not sure if the settings for the windows option are correct. This is my /boot/grub/menu.lst:
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I got this laptop today and decided to dual boot Linux, as I've been using it for a bit on an older laptop. I downloaded and installed Ubunutu 10.04, using the first install option to have it install next to Windows, and afterwards on startup I get 6 options: Whenever I try to boot with either of the Windows options, it goes to the Windows loading bar, then the screen goes black and the computer resets. I didn't make recovery disks. I already had Vista recovery disks and I did try that, but it said I wouldn't be able to restore the system with them. F11 on startup splashscreen does nothing.
My windows vista stopped booting so I had re-install vista. Now that I have done that Vista automatically boots every time I turn on my computer. I can still see that the Linux partition is there but I do not know how to boot it.
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I had a fresh copy of Windows Vista installed (original from the factory)- and I followed a document of dual booting - however I think I did some mistake or automatic skip of install Grub boot loader-
Now my fedora 11 is running smoothly but windows vista is gone or does not boot - I don't have any boot disks- they give examples having floppy disk a boot disk- my laptop doesn't have floppy drive- I guess I could manage in cd or flash drive.
I see my computer's config in fedora desktop as computer:///250%20GB%20ATA%20WDC%20WD2500BEVS-6.drive computer:///250%20GB%20ATA%20WDC%20WD2500BEVS-6-1.drive computer:///PIONEER%20DVDRW%20%20DR-KD08HB.drive computer:///root.link
I noticed that the partition NTFS still exists and it has not been erased. I did install linux on hda5 since hda1 was partitioned with NTFS
Is there any manual and precaution to be taken while doing the same dual boot system ?
Or is it possible to have dual boot with the present config- although i am ready to install fresh window vista and fedora as my dual booting systems...
I'm installing Ubuntu 10.04 for a friend, dual booting it with windows vista. The installation was going just fine up until the 4th step- partitioning the drives. After designating space for vista and ubuntu and running it, it popped up the window and displayed 0%... for the next hour. After looking around on ubuntu forums for a solution, I tried manually partitioning the drives in vista. Vista wouldn't let me, saying that access was denied. I tried using gparted next, which had an error with it as well. Does anyone know what i can do to work around this?
I can dual-boot on my PC by using my SATA drive for Windows & a second IDE (PATA) one for Ubuntu.However when I try to install both OS's on the Primary SATA drive side by side only one is detected (and I have no option to boot the other).
I have a friend with the same problem who is trying to boot Win7 and Ubuntu off the same SATA drive and the same issue occurs on his (He doesn't have the second drive as an option as I do).
Does anyone know a way to get side by side installation to work on one (SATA) drive? Failing this is it possible to boot Ubuntu off and External hard drive and still be able to dual boot Windows & Ubuntu?
I installed Ubuntu onto a separate partition I have. Now however when i boot up, Grub (v1.98 ) gives m 5 options.
Ubuntu, with Linux 2.6.35-22-generic Ubuntu, with Linux 2.6.35-22-generic (recovery) Memory Test (memtest86+) Memory Test (memtest86+, serial console) Windows Recovery Environment (loader) With no Vista option.
When I run the recovery environment however, it runs just my regular vista boot would have. Is this just a name issue? Ideally I would like to have my Vista option back.
I had Windows Vista installed on my computer and created a partition to install Fedora 15. I chose the option to install fedora on any free space, so it should have installed on the empty partition. When I boot up, there are two boot options. Fedora and Other. When I select other, it gives an error:BOOTMGR not found.Is there a way to add Windows Vista to the Grub Bootloader by editing the grub menu. I don't know if it will help, but here is what I get when I run fdisk in the terminal:
Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes
I have been trying to edit grub to make windows vista the default but whne i got to the menu.lst it is blank. I use this from the official guide gksudo gedit /boot/grub/menu.lst and it still comes up blank as well as sudo gedit /boot/grub/menu.lst
I am trying to boot up Vista Home Premium from USB since my internal (bootable) CD-RW drive has failed and I cannot boot up Vista from CD.
I have Ubuntu running in the Windows partition and all my windows files are in there so I don't want to do a full installation of Ubuntu (yet).
I formatted an 8GB USB stick into two partitions
I then copied over to /dev/sdb1 all files from a Vista CD using an external CD-RW drive (which is not recognised as bootable on USB port).
In my Dell BIOS settings I changed the boot sequence to be bootable from USB disk first.
then I tried to reboot Vista installation in the USB stick.
But I get this message ..."this is not a bootable disk .. insert a bootable floppy"
So I could not boot up the Vista installation files.
When the boot flag is "on" in a GParted created partition does this make the partition DOS bootable for Vista installation?
My question is - What utility in Ubuntu 10.10 can create a DOS bootable partition on a USB stick? It seems that the MBR might have been overwritten when I installed Grub 2.0.
I can Grub dual boot between Windows and Ubuntu but I can't get very far with Windows .. stalls in safe mode.
So a Vista repair is called for. I would prefer not to reinstall Vista afresh at this stage.
There is a thread here explaining how to repair Vista bootloader
[url]
But it assumes that I am able to boot from CD-RW drive.
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen. Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is: Disk 1: Solid-State: Boot Partition SL6 LVM1: Root Partition Disk 2: Hard Drive: SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root) Disk 3: Hard Drive: Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
I installed Opensuse 11.3 on a separate partition to vista on my Acer 5115. It runs fine but the GRUB boot loader failed to show the Vista OS. I tried to add it by editing menu.As far as I can see (and I don't have much experience with these things) the Vista OS is there, on sda5, but doesn't boot correctly because the winload.exe is in the wrong directory. Why the sdax numbers are all rearranged is a mystery too, but I have reinstalled vista several times so that could be why.I don't have a vista recovery cd (wasn't given one), is there any way to fix this within opensuse (which works fine)?
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
I had two OS in laptop windows vista and linux mint and when I used to start my computer I used to get different option for os like linux mint, linux mint memory check, windows vista etc.. but because of virus windows vista got crashed so I formatted disk drive C: which were containing windows vista and reinstalled fresh copy of vista.. but now when I start my computer vista start automatically, I do not see GRUB options to run windows os or linux mint..Is there a way to reinstall GRUB to get options like I used to get before formatting ?
I have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment. Here is my Boot Info Script: .....
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version. I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
Not sure if this is the exact right spot for this post, I've got an .ISO file of windows 7, but no DVD's to burn it to. I've read that I should be able to use GRUB to boot, but I can't exactly get it to work. I've been poking around the map function trying to sort of mount the iso somewhere within the hard drive, but I'm not sure if that's how it should be done.
I recently installed Ubuntu 9.10 and when i rebooted, GRUB fails to boot to windows. What exactly happens is that when i select Windows, it simply goes to a black screen with GRUB at the top, and a blinking cursor (that accepts no input) Summary:I am running Windows XP Professional No, i do not have the Windows disk My hard-drive has been partitioned between Ubuntu and Windows I have Ubuntu 9.10, which boots normally Windows failes to boot, and hangs on a screen that says GRUB _ I am a total linux noob I dont want to simply rewrite the mbr as i still want to be able to dual boot. I have important data on the windows partition that i want to keep.If you want any logs/info, you'll have to tell me EXACLY how to view/capture them
Every time I use GRUB to boot into Win7, I can't reboot back into GRUB or Windows. I think Windows is forcing itself into the MBR then proceeding to corrupt it. I believe I can just boot into a Live session use "sudo grub-install /dev/sda", but that seems like a lot of work just to reboot.
I need to boot into a Windows XP installer CD from GRUB. How can I do this?
(The reason is that I need to use drivemap to install to a secondary hard drive.)
Are there any viable workarounds? For instance would installing to the primary disk, copying to the other disk, and then using chainloader to point directly to ntldr work?
Right, so I've looked high and low for the answer to this problem and haven't found it, although I've found a million and a half threads about grub especially when it comes to dual booting windows. Which I'm not. What I am though, I suspect, is an idiot who shouldn't mess around with my computer at 4 am.
So the problem is every time I turn on my pc, grub tells me it can't find a file system and goes into recovery mode. Can't boot into ubuntu at all. Am using the live disk to type this.
I also think I know why grub is doing this, I was dual booting windows before, I had windows installed originally, added ubuntu to a new partition. Was having problems with grub. Figured that reinstalling it wouldn't be a bad idea, it might fix it. In that process I did something rather stupid, I accidentally installed grub to my other internal hard drive. There is no operating system on it. Just movies, music, etc. The problem, I think, is that my second hard drive is sda, and the one with my os is sdb, which I suspect means that grub is loading from sda and finding no operating system, rather than from sdb. (It's like that because my larger drive wouldn't fit into the sda slot on my computer, long story.) How do I remove grub from sda?
I will like to triple boot Ubuntu, XP and Windows 7, but I already had Ubuntu and XP running on separate HDDs, Ubuntu was installed first, then I installed XP on a separate HDD (with the Ubuntu HDD disconnected), now I did the same for Windows 7, I disconnected all other HDDs (Ubuntu, XP and Data)and installed windows 7 on a separate HDD.When I connected everything back(Ubuntu HDD, XP, Data HDDs and Windows 7 HDD, Windows 7 does not appear on grub boot menu and now Windows 7 does not boot up by it self.
Is there a way to simply add Windows 7 to Grub so I can have all 3 OS's on grub menu?Can grub search HDDs to look for OSs to add to the menu?Funny thing is the XP entry on grub appeared by it self, I've never edited grub to add XP on the booting menu, I was booting directly to XP by going into the BIOS and selecting the XP HDD as my booting drive instead of Ubuntu HDD, somehow XP was added to the grub booting menu.
I recently had to reinstall windows on another partition on my hard drive due to there not being any good way to run unrealed under ubuntu (believe me, I've tried everything) Is there a way to install grub from windows without using a liveCD or booting to a USB? I have downloaded WINGRUB and to be fair I have no clue how to use it.I no longer can access my Ubuntu partition.
Background: My mother's HP laptop had Ubuntu and Vista on it, Ubuntu my brother's doing. He decided he wanted to take off Ubuntu yesterday (he had forgotten the password), and deleted the partition that it was contained within. The computer now boots to this error.
Inventory: We no longer have the install disk for Windows Vista, he cannot tell me what version he used of Ubuntu, what partition it was on, any of the specs for the machine, or generally any information about the system. All I am aware of is that error on the boot-up screen. I have nothing else to work with.
I would like to remove Grub, and Ubuntu, and leave Windows intact (the request of the owner of the computer), but I have no idea what commands I could use to get rid of either when I can't access Windows, or how to properly remove them if I did access Windows.
