Ubuntu :: Booting Into Blank Prompt 11.04 Aspire One?
May 25, 2011
Reformatted and reinstalled Ubuntu 11.04 on my Acer Aspire One netbook. It crashed the other day when I turned on desktop cube.Everything was fine, I installed the gnome desktop environment, but I powered up the netbook this afternoon and it is doing the same damn thing it did after I activated desktop cube, booting into a black screen with a flashing underscore on the upper left, that responds to absolutely no keyboard input. I'm forced to hold down the power button until it turns off. This has apparently happened for no reason. Not particularly happy today.
View 1 Replies
ADVERTISEMENT
Jun 12, 2011
I'm working through this issue with my Acer Aspire 5336-2524. Blank screen, can't see anything after reboot.
(Display=Mobile Intel (R) 4 series express chipset family)
Enter;'msinfo32.exe' in the search programs and files box. Open it up after search finds it. You'll then be able to see BIOS version. Go to Acer support and update BIOS if needed. I needed to and so far the result has been that I'm not able to see the install of Ubuntu, butttt,cannot see it after going through all the start up, up to the point where the desktop page should be, then blank screen again.
I'll come back with results.I also am thinking about updating video driver too. (Tried but said it was up to date)Additional (6-14-11@7:36PM) So far by updating BIOS I was able to view ubuntu long enough to install, but couldn't view fully loaded OS (as in couldn't see desktop). As mentioned by foresthill, plugging an external monitor into the laptop allows me to see everything on the external monitor. Ahhh, sweet progress! Waiting for reply from foresthill about exactly what they did in grub for a permanent fix.Additional Two: FYI: Xubuntu 10.10 runs great on the laptop. But no wifi (I cannot remember if I updated and ran across broadcom driver install as 10.04.2 did)
Finial Update: I Installed ubuntu 10.04.2, which had no problems with screen, couldn't use wireless until I update and then a note poped up about broadcom driver which I allowed to install, now I have a fully functional ubuntu. Someone recommended using "LTS" versions for initial install, then go from there if you want to try different versions. I'll wait for the LTS before messing around, just glad to finally get a fully functioning ubuntu!
View 4 Replies
View Related
Jun 17, 2011
I installed Umbuntu (MythBuntu 11.04 as backend system) and initially when starting it just went to a blank screen (no prompt, nothing). After going through safe mode I was able to get to a prompt and into the UI in low graphic mode.After updating the graphic drivers (nvidea) to the latest and changing some grub options (GRUB_CMDLINE_LINUX_DEFAULT="acpi=off splash") when I restarted it went to the busybox initramfs prompt. I typed "exit" and the UI started up normally.
The next time I restarted it went through to a blank screen. I typed "exit" again and enter and the UI started up normally again (even though I couldn't see what I was typing at the time).While I was going through the recovery mode I do remember some messages about disk not found/mounted, when I googled it I found stuff about entering rootdelay=90 in menu.lst which doesn't exist anymore. Is there a similar option I can enter somewhere in 11.04?Also I'm new to Ubuntu (in fact any Linux distro as an admin), where would I find any log files that may help with finding the problem.
View 2 Replies
View Related
Nov 28, 2010
GNU bash 3.1.17. I say there must be, in bash, a keystroke combination that does this: I type say, two words at the prompt. Then I press HOME. And now, holding down some control key, I press a key that erases from current cursor position up to the first blank (the space between the two words). If I am right, which is the key combination? You could as well refer me to the bash manual section where the different combinations, one of them a control key are listed.
View 2 Replies
View Related
Feb 25, 2010
I have tried the following techniques to try and boot from CD on my Acer Aspire 5515 laptop: Change SATA information to Native in BIOS. Set the Boot order for the CD/DVD Drive to start first, along with Main driver starting second.
INFORMATION
My laptop is an Acer Aspire 5515.
BIOS Version is V1.0 (latest) from Acer.
PhoenixBIOS bios (?).
I have still not been successfully able to boot from CD. No matter if it says to boot from CD/DVD Drive first, it skips on to Main driver and starts Windows. It's not because I didn't burn the .ISO image right, because it worked on my desktop, which is ALSO an Acer, an Acer Aspire T180. What I am trying to do, is install Windows XP Professional, and dual-boot it with my Windows Vista. Only thing is, it WON'T boot from CD.
View 7 Replies
View Related
Jan 11, 2011
I had a problem with my system today when I came home and unlocked the screen and the single program I had left running had crashed and so did AWN, I restarted the system and it just goes to a blank screen just before it got to the login and does nothing. I reinstalled the system and reinstalled the ATI drivers downloaded from the ATI website just like I had previously (had problems with the Ubuntu drivers in the past) and rebooted the system and got the same blank screen... Now I'm on my second system reinstall of the night but haven't installed the ATI drivers yet, but I need them to set up my dual screen gig.
View 5 Replies
View Related
Aug 17, 2011
I recently installed Ubuntu 11.04 on my laptop. I uninstalled, now I installed again. I used WUBI both times. This time, every time I boot, (after I select Ubuntu in the wubi and grub bootloaders) I get a blank black screen with a flashing _ in the corner. Then I get to the login screen and it works like normal. Are there any solutions for this? I'd sort of prefer to see the ubuntu logo and flashing dots.
View 5 Replies
View Related
Mar 8, 2011
I am trying to give a parameter or string by default to the prompt after booting from CD/DVD after modifying isolinux.cfg file For this I am able to successfully alter the boot.iso present in RHEL+CENTOS DVDs using the below command mkisofs -o /new.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -J -R -V disks . But, when I am trying to alter the Netbackup BMR iso file it does not has boot.cat file and also giving me below errors.
[Code]...
View 2 Replies
View Related
Jan 4, 2010
On this Lenovo netbook: I was playing with Firefox, came across a security.ubuntu.com problem, established in general terms what it was referring to and that it might be easier just to reinstall Ubuntu andupgrade to 9.04.Succesfully installed, it said, please to do a restart. But the screen is blank. Now, all I have is a totally dark screen whether booting off the hard drive (it starts running and clicking, then stops clicking; staysrunning 'til I switch off again) or via the external CD drive (which lights up, flashing, for a few moments while clicking, then runs down).
I've tried the Ubuntu CD which originally installed ok, and also the one from which I'd first installed Ubuntu instead of XP.I wondered if I'd inadvertently switched off the screen, but apparentlynot - in any case, presumably it would default to On? I've also looked forsomething on an external screen, I know that works because I played with
it a few weeks ago. fn-F" to toggle the screen doesn't do anything, nor fn-up/down to change brightness. I've just tried ctrl-alt-backspace, with CD and HDD, to no effect.
The battery's fully charged but in any case I'm using the psu and alllights are correctly lit. I've reseated the CD leads several times to besure.I've never networked it to the desktop - it had seemed a good idea to keep them separate so only one gets broken.
View 2 Replies
View Related
May 2, 2010
I have a Asus A8N-E motherboard with AMD64 processor and NVidia 6600 GT graphics card.I downloaded the AMD64 version of 10.04 (the boot+live cd) and tried booting with it. After looking at the screen showing Ubuntu loading with 5 dots moving forward for about 5minutes, the screen went blank (not completely blank as power-off but a very dark grey color). I waited for about 10-15 minutes in this state but nothing happened.During this whole 10-15 min period the disk usage on the machine was high.Eventually, I just turned off the machine and booted into windows (which was already present on my machine) successfully.Is that blank screen for such a long duration a normal step during installation or was a different process expected?
View 1 Replies
View Related
Jul 5, 2011
several months ago I installed Maverick and it worked well, but eventually I lost the GUI. I fiddled with it to no avail. So I decided to do the Natty upgrade and it ended up not fixing the problem though I am able to boot to graphics safe mode.
I popped on this forum and a couple others but got little response and ran out of fiddle time. SO now I have a little time to mess with this, and I REALLY want to move back over to Ubuntu so if any one is familiar with that could be the issue
View 9 Replies
View Related
Jan 19, 2011
When I start my system on the Ubuntu 10.10 CDROM I get a tiny icon at the bottom, then the screen shuts off due to no signal. So I cannot run the Live CDROM. Relevant here is that Debian CDROM runs just fine. (Lenny installs and runs good, but squeeze does not) Linux Mint (based on Ubuntu) gets me a pretty graphical welcome screen, then the monitor shuts off just like Ubuntu and Kubuntu.WinXP installed and runs without a hitch.
My system: Gigabyte GA-P43-ES3G with 4Gb ram, 750 Gb SATA HDD, Nvidia Quadro video card.I have gone through the BIOS settings looking for clues:SATA AHCI mode is set to IDE (versus AHCI)SATA port 0-3 native mode set to enabled (versus disabled which would be legacy IDE mode)Azalia codec set to auto (verus disabled)
View 6 Replies
View Related
Apr 26, 2011
I downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies
View Related
Apr 15, 2010
So I Installed OpenSUSE A Plethora Of Times. In Both 32 & 64 bit. But No Matter What After It Boots Up And Where I Should See Some Kind Of User Interface The Screen Is Blank. Now this Is The Point Where You restart The Computer And See Where You Went Wrong But Come to find Out My Power And restart Buttons Dont Respond So i Have To Pull the Battery Out Of My Laptop.
View 4 Replies
View Related
Feb 3, 2010
I am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
View 4 Replies
View Related
Jul 1, 2011
I installed rhel 5.0 on my hcl laptop, all steps completed successfully, but after booting it goes blank nothing happens, I also have a windows xp installed in c:
View 5 Replies
View Related
Jun 16, 2011
During booting my ASUS 1215T behaves abnormally. It blinks and some part of the screen gets blank during booting. After booting things get normal. For Fedora 14 and Windows 7 no problem found. My netbook has AMD HD4250 Gfx chipsets with embedded AMD RS880M chipsets.
View 2 Replies
View Related
Jan 8, 2011
I just put on my Linux PC now and after booting logging into the user a/c, it just gives a blank screen with the desktop wallpaper - no menu's or anything, so there's pretty much nothing I can do. I know I had removed the menu and replaced it with the dock (awn dock or something).
However, I can log in as root and root works fine (so I'm doing the update at the moment).
Coming back to my question, I used to know an Ubuntu command which I put in as sudo (terminal)and it used to work like a magic command which would literally restore and repair my linux installation - I even used it when I bought a new system and transferred my linux hard drive from my previous machine to the new one and this one command actually setup and prepared my linux installation to work smoothly in my new PC - just one command after connecting my h/drive in the new PC.
View 4 Replies
View Related
Jan 3, 2011
My screen goes blank for few minutes during booting to print the login page.
When I press ctrl+alt+f1 it shows and hangs at
Enabling /etc/fstab swaps
I show below the output of some commands:
[root@ws-test ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 76G 55G 18G 76% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
/dev/sda3 56G 34G 20G 64% /hdd-1
[Code].....
View 2 Replies
View Related
Oct 30, 2010
I had a problem with my grub (system displayed "unknown filesystem" and then the grub rescue prompt). I then used a livecd of ubuntu 9.04 and ran fsck for a while (closed it in the middle). Grub then worked. But when i select ubuntu 10.04 it goes to the purple screen and stops there. There's some error before loading the purple screen.
View 1 Replies
View Related
Jun 8, 2011
I recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
View 9 Replies
View Related
Feb 2, 2011
I'm running Red Hat Linux 5.4 on HP DL580 server with 16 processors and 64 GB of RAM. I'm connecting to the server remotely through SSH. after entering the password, it takes time to return the command line, if I click ctrl+c during this time, I'll have the command line prompt but not the correct bash prompt (I have to run bash to pass to my correct prompt).I tried to install Apache on the server, ./configure took 4 hours to finish instead of 1 or two minutes, Oracle installation same behavior. Server Disks are mirrored using RAID controller.
View 6 Replies
View Related
May 17, 2010
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
View 9 Replies
View Related
Mar 19, 2010
I'm logging on my server via PuTTY but I'm getting the bash # prompt and I can't call the few commands I know i.e.: lynx
How do I get the more familiar $ prompt?
View 4 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
Jun 1, 2011
I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies
View Related
Jan 18, 2010
I've been searching the forums for any posts that cover my problem, but most of the booting problems I've found are different from mine.Anywho, the situation:ell laptop, 2 partitions, first is Windows XP, second is Ubuntu Karmic.Whenever I turn on my computer the first loading screen that shows up (is this the BIOS? Excuse my little knowledge of this stuff), before GRUB loads, is really slow. It takes about a minute to load.However, whenever I restart from my XP partition, it suddenly loads fast! And this does not happen when restarting from my Ubuntu partition or anything
View 7 Replies
View Related
Jan 6, 2011
I am using a linux kernel 2.6.36 using mips architecture. I have succesfully booted the machine through Flash memory, but it is not booting through nfs. It is getting stuck at the stage where the image starts loading. In short the vmlinux.img file is being copied properly to nfsroot but the image is not loading.
View 5 Replies
View Related
Feb 28, 2010
I used Unetbootin to install Ubuntu 9.10 i386 remix onto my USB flashdrive and my Aspire One says it doesn't recognize the operating system or it didn't find it on the flash drive or something. What happen?
Here are the details:
Model name: Aspire One
Operating System: Linpus Linux Lite v1.0.15.E
CPU: Intel Atom CPU N270 @ 1.60 GHz
System memory: 1024 MB
Hard Drive: 16GB (It's an SSD)
Battery: Li-ion 2200 mAh
Bios version: v0.3305
VGA: Intel 945GME Express Integrated Graphics Controller (rev 03)
Resolution: 1024x600
Audio: Realtek ALC662G/268 (rev 02)
Webcam: Acer Crystal Eye Webcam
LAN: Realtek RTL8102E PCI Express Fast Ethernet controller (rev 02)
WiFi: Atheros AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)
3G/WiMax: N/A
MODEL NO. : ZG5
MFG.DATE:0811 AOA 110 - 1626
View 1 Replies
View Related
