I'm finally making the change away from rhythmbox for the now adopted Banshee and I'm noticing that my fans run really hard when I'm running banshee. I'm monitoring speeds and don't notice a huge increase in temp but the fans none the less run hard. CPU usage is running around 6% for banshee not nearly enough to cause this fairly large laptop so having the fans run hard make it a bit loud when around others
View 1 Replies
my computer sounds as if I have been playing crysis warhead for like 5 hours, because every fan in my computer is running including the graphics card. They are not just running normal either they are running at the max.
View 4 Replies View RelatedI upgraded my Asus Eeepc 900a to 10.4 yesterday. Since then, Xorg has averaged between 30-40% CPU, and my fans have gone nuts running high/low/high/low, ad nausium.
Any ideas what might be going on? Another clue perhaps: on reboot or shutdown, I get a "program not responding" message with "unknown" as the hung program. I have not been able to determine what this program is or if it is related to the hyperactive Xorg.
I have an HP ProLiant DL560 server with Debian 6.0 installed and cannot figure out how to get the fans to run at anything except high. I have searched google and this site, but cannot find anything that works on Debian 6; the SLES packages will install, but don't do anything.
Server Specs:
HP ProLiant DL560
4x Intel Xeon 2.20GHz processors
6GB RAM
2x 72.8GB 15k rpm SCSI HDDs (Raid 1)
2x power supply
How can I set my processor fan to 100% in linux?
View 1 Replies View Relatedi'm using slackware 13.37. (Sony Vaio VGN-FS315H)
my fans are working all the time, they are loud and it's annoying.
I already did sensors-detect, but I get this message every time.
Code:
Sorry, no sensors were detected.
This is relatively common on laptops, where thermal management is handled by ACPI rather than the OS.
I have problem with funs speed in my fujitsu rx100 s6 server, rpm funs is 3000 ? I think it is not standard speed funs. On windows 2008 server funs works quietly. Fujitsu supports only windows servers, red-hat enterp. and suse enterp. Is there any software to control speed fans?
View 6 Replies View Relatedrecommended that application to display temperatures and fans, and to create security alerts and turn off the pc for the kde desktop?
View 4 Replies View RelatedI am trying to use GKrellM [URL].. to monitor my system's fans/temperatures (I am trying to undervolt the fans a bit to make the systems quieter), but there don't seem to be any sensors available. I have lm_sensors installed.
View 2 Replies View RelatedI am going to upgrading the cooling in my computer, so I bought 3 case fans (the amount my case has room for). They have 4 pin connectors, so I was just going to plug 2 of them into the 2 available fan headers, and then plug the last one into a molex connector considering that they all come with molex adaptors. However, according to this site, your not supposed to because its too much strain on the motherboard? I am not (never have never will) overclocking so is that just for overclockers? My motherboard manual says it will work with 12 volt fans which are what these are.
View 5 Replies View RelatedI just did a clean reinstall of Ubuntu (10.04 --> 10.10). After the install, any time I do CPU intensive work, my PC is suddenly shutting down like it's overheating.Everything was working fine for months, and started having problems immediately after the reinstall. so this is not a problem with my hardware, and it's not a problem with my fans needing cleaning -- it's a problem with software. So please don't tell me "that sounds like overheating, clean your fans". Something is different in software-land between 10.04 and 10.10 that is causing this to happen -- I assure you that the upgrade did not magically fill my fans with cat hair.
I have checked my log files, and can't find anything related to overheating -- searches for things related to lm_sensors, "temp", and "thermal" are not turning up anything in the system logs (syslog, kern.log, or messages). I also looked at the logs around the times of the sudden shutdown, and couldn't find anything unusual.How can I diagnose this? I'd like to file a bug report, but since I can't find anything in the logs, I honestly have no idea how to go about providing useful information.Is there anything besides overheating that might be causing my laptop to suddenly shut off?
I am running Fedora11 on a brand new HP Pavilion Elite, and the fans just won't stop running at full speed.
I have tried
Code:
Which told me lm_sensors was already installed.
Next I did
Code:
Taking the default answer to all questions asked.
Doing
Code:
Gives me something like this:
Which I suppose are normal values, which do not require fans spinning at full power.
However,when I do
Code:
I get this output:
I installed Ubuntu 9.10 onto my laptop and then upgraded it to Ubuntu 10.4. I've added some software packages along the way, such as MythTV and several smaller apps, but have not gone crazy in adding apps. I have a 160GB hard drive.I ran out of disk space recording a World Cup game and was surprised. I deleted all of the MythTV recordings and ran Computer Janitor and now I have only about 50GB of free space! It is not my primary computer, so I don't have a bunch of videos, music, pr pictures on it.
I did a clean install of Ubuntu 10.4 to a USB flash drive and it has only 3.7GB occupied on the drive.Any recommendations of why I have over 100GB on the hard drive and any cures on how to clear out unneeded files?
I cannot understand why a NFS server is so hard to get running..i tried everything.. googled and searched the forums to find guides and HowTo's but none of the works all i want is the server sharing /media (and all subfolders)everyone with access to the server from my should be able to mount the shares and use have all permissions on the shares..Now when i try the above guide, i can mount the share on the client but the subfolders are empty.
View 1 Replies View RelatedI install Ubuntu from an installation of Ubuntu, rather than using the installation CD?Specifically, I have Ubuntu 10.04 installed (and bootable) on an SD card, and would like to install from Ubuntu (running on the SD card) to the netbook's hard drive.
View 2 Replies View RelatedDoes anybody know how to or even if it's possible to create an ISO image (a snapshot, if you will) of an entire volume on a Linux box so that I can use that ISO to burn to a CD use in the future for creating an identical configuation on another box (which would have the same exact hardware)? It is to my understanding that I'd have to first create the ISO file of the entire system and then burn it to a CD and somehow mount it onto the hard drive of the identical-system-to-be.
I'm thinking that I'd have to use the "mkisofs" command but I'm not sure exactly how to do this. P.S. I do not want to use any 3rd party applications.
My hard disk speed is really slow. the actual reading from 'fio' is as shown in the attached image.
My system is detailed below:
I have a home network that includes a couple of computers {A, B, C, D}. currently, I have a cron jon that runs every minute and updates (using rsync) the hard drives of computers {B, C, D} with the contents of hard drive {A}. So far everything works great, as hard drive {A} barely has any information on it. Now, I am about to copy a lot of information (about 8 GBs) to hard drive {A}. Naturally, the cron job will run (as it runs every 1-min) and try to 'sync' the contents with hard drives {B, C, D}.
Given my network (100Mbit/sec), there is no way the cron job will be able to 'copy' the contents to hard drives {B, C, D} in one minute. It will take much more time. Does this situation create a problem? meaning, will cron re-run a new rsync instance 1min later, even though an existing rsync process is running and still copying information to hard drives {B,C,D}? Will my backups be hurt / slowed down tremendously because of this?
I have two systems, both having file systems running on LVM. System No 1 has 2 PATA HDD (40 and 80 GB) running linux on LVM. System 2 has a single SATA HDD (300 GB) which again uses LVM. What i was trying to do was to add the two HDD in system 1 to system 2, possibly with little or no data loss. So i connected the PATA drives from system 1 to system 2 and booted up. The system booted up to the openSUSE 11.3 splash screen and stopped after scanning the HDDs. Frankly i never expected openSUSE to try n auto mount the new drives. I think the problem was caused because both the systems had VG and LV of the same names. Can the volume group be renamed, maybe from a live CD or somthing?? System 2 is not boot able now.
View 5 Replies View RelatedI have an old unuseable computer at home that became useless after a hard disk failure. I don't want to spend money on buying a new PATA IDE HDD for it, so I was wondering if I can use a PXE boot server on my notebook (using a virtual machine with Linux) and boot a Linux on the old machine with PXE without using Hard Disk. It is possible? Do I will need to make some extra configuration or use some specific enviroment do do this?
View 1 Replies View RelatedI recently finished installing Fedora 9 on a Prolient ML 330 G6 Server, but i configured the SATA hard drives to be viewed as four seperate hard drives. I was asked to merge the drives to be seen as one 800GB hard drive, my biggest fear is that we had set up Samba to share folders between fedora 9 giving specific users access to specific files saved on the Prolient server, will those settings be lost.And could you call that a File Server or do you have to enter any more settings And also if anyone could point me to a tutorial on Logical Volume Management and Raid specifically for fedora 9
View 10 Replies View RelatedI'm getting (1)various errors spat out on STDOUT while running X and (2)a hard fault in Openoffice.
(1)
> Warning: Duplicate shape name ""
> Using last definition
[code]....
I have noticed a really bad problem on here that i never had on windows 7 even with overclocking.
It seems the fans stay on and are basically idling or are at minimum speed and the computer and graphics cores are just idling at 99c which is really dangerous, but not critical yet since this is an alienware laptop and the technician did say its temperature rating is above that.
The problem is I need to get the multiple fans in the case to start up and cranking like they do to keep the system really cool in windows 7. I kinda wanna get this fixed ASAP as i dont want to constantly be running at this temperature.
I would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.
The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
View 1 Replies View RelatedI am noticing problems accessing the firewall gui and mounting the second hard drive in my PC running Fedora 13. This is only when I am accessing the machine with VNC. If I am sitting in front of the physical machine, I have no problems at all. I would like VNC to behave more like I am sitting in front of the computer. Is there a way to do this? Thank you in advance for your feedback.
View 4 Replies View RelatedBackground is this: Laptop has an internal h/d (obviously) so I removed it from laptop. Then set Bios to boot from external h/d. Installed Fedora 11 on ext. h/d no swap partition as drive already has 4 partitions. Fedora ran lovely!! I then replaced internal hard drive but left bios to boot from external hard drive. Boot screen for fedora came up, hit enter and fedora started loading. The little balloon started filling up, got to a quarter full and then screen went black. Had to reboot to get going again,same thing happened. Can anybody tell me what may be causing it,i.e. black screen. Fedora boots up and runs lovely with internal h/d removed. Any help very gratefully received. M/c has intel dual core processor, 3 gig of ram.
View 2 Replies View RelatedI currently have a centos 4.4 I believe running with a 250GB hard drive. I want to make an image of that hard drive. I have tried removing the drive and connecting it to my windows pc using an adapter that would allow my windows machine run the hard drive as it was a regular external hard drive. Of course windows doesn't reconize that drive since it is linux partitioned. I am thinking that I need to have the hard drive inthe box I am wanting to copy and put in a blank drive in the box that I want to copy to. And boot from a live CD and use cat or dd to copy it. I have seen the commands before bust I am thinking this is the only way. Basically I am wanting to have a duplicate of the drive and build a whole new server that is already all setup.I will just change the host name and assign it another Public facing UP. Is this correct? Oh, and the new server will have different hardware. Might even be AMD or intel different from source or destination.
View 12 Replies View RelatedI have seen that is possible to boot from a USB stick and use a USB memory as hard drive.I have a server enable to hold 6 sata drives 3.5", But I want to use the 6 drives and make a Raid-5 setup for backups 5 -1 spare. /boot cannot be on a raid-5 level 0 or 1. But I want to have redundancy for my OS, them I can install Centos on a Raid-1 using 2 disk, which let me only 4 for the raid 5. I will run a backup I want to have a lot of space.
Using 4 disk for raid-5 2 TB I will have 6TB no spare, no spare is not a good option at least I will prefer 1 spare.Well, I was thinking, the server MoBo have USB support, if I open the box I can see the small entrances, If Centos let me installed on a USB memory drive, can I trust a USB memory stick?t night with bacula.
