Ubuntu / Apple :: Mac Mini And MBR Only - Keyboard Not Working In GRUB?
Jun 14, 2010
I set up my Mac Mini to dual boot Windows 7 and Ubuntu. I started with Windows only, and allowed it to rewrite the partition table (GPT/MBR). When I tried to install Ubuntu, it didn't see Windows until I used Gdisk to delete the GPT portion. Then it recognized the Windows partition and installed Ubuntu as per normal. Now when I boot, I get GRUB and the option to boot Ubuntu or Windows 7. The only problem is that the USB keyboard (Aluminum or standard PC keyboard) doesn't work until an OS is loaded.
Is this an EFI problem? I'm starting to think that EFI is required for USB keyboard support at bootup since it replaces the BIOS functionality. Is this even remotely accurate? Did I mess things up by not going the rEFIt route? I'm not sure what I can do at this juncture as I can only boot into Ubuntu.
I could install OS X, rEFIt, then Windows and Ubuntu, keeping rEFIt as the boot loader, but if there's an easy solution I'd like to avoid that. More importantly, I'd like to understand what's going on.
View 3 Replies
ADVERTISEMENT
May 15, 2010
I'm using an Apple bluetooth keyboard, model A1016 the one with a white bottom inside clear plastic. The machine is a Mac Mini (2,1) and I also have an Apple bluetooth mouse. The mouse works fine on Ubuntu 10.04. The keyboard has issues.
When I add the keyboard using the bluetooth applet, I find that I can't assign a specified PIN. I have to use automatic PIN, and then type the random number presented. That works until I reboot the machine.
After reboot the bluetooth applet menu shows both the mouse (connected) and the keyboard (not connected). If I tell it to connect the keyboard, nothing happens. The only thing I can do is delete the keyboard, re-add it, with a new random PIN.
View 1 Replies
View Related
Aug 3, 2011
Just bought a new Mac Mini, no optical drive. Using a USB drive, I can get to the EFI grub menu, and boot to the installer menu, but from there the keyboard (USB) doesn't work at all. I've tried every combination of boot flag and am at my wits end. Booting using BIOS results in a "Boot error" message, no grub.Update:Using the 11.04 amd64 iso, I have a slightly different problem. Eventually after grub, I get kicked to a minimal shell (dropbear maybe?) with the complaint "unable to find a live medium." However, from other searches, this may be an issue with a corrupt USB disk, and not a problem with the Mac/EFI boot process.
View 1 Replies
View Related
Mar 24, 2010
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like
[code]...
View 9 Replies
View Related
Jan 6, 2011
I bought a Rock Mini keyboard with touchpad MSZ-KBTP. The touchpad is working with fedora 14 but some of the keys are not what they should be. I tried changing the keyboard layout under gnome keyboard settings but the keyboard is not listed.
View 5 Replies
View Related
Mar 23, 2010
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like URL...
View 1 Replies
View Related
Mar 28, 2010
I've noticed that my field keys don't work on my iMac. The eject key works, but if I try ALT+F2 I get nothing. I there something I need to reconfigure to get my keyboard full functioning?
View 2 Replies
View Related
May 4, 2010
I upgraded to 10.04 on my Macbook and everything was working fine. Now, my keyboard isn't working at all. I didn't do any system tweaks or anything.
View 9 Replies
View Related
May 6, 2010
My keboard was working perfectly (backlight, inverse FN) until upgrade from karmic to lucid. Now neither backlight neither inverting FN (in pommed.conf) works- backlight is always off, FN is default OSX-like.
Trackpad worked "almost superb" (missing click with one finger and drag with another!!) but after upgrade (=no mode udev) event number changes with every reboot so I cannot put configuration based on /dev/input/eventX to Xorg.conf. How can I make it have the same number after reboot now?
View 2 Replies
View Related
May 7, 2011
Neither Ubuntu's Unity or KDE respond to the function keys on a regular Apple USB keyboard. I can plug in a non-Apple keyboard and they work just fine. What needs to be changed or configure so that F1 and company on the Apple keyboard work as on other keyboards?
View 1 Replies
View Related
Apr 22, 2010
This morning I bought an Apple wireless keyboard and I got it connected through Blueman. It works like a charm, but I have on problem;
When I log out I can log back in by typing in my password. However, when I restart the computer it seems that bluetooth is not loaded yet and I cannot enter my password. So I have to log in using my wired keyboard, and then disconnect & re-connect to my wireless keyboard using blueman before I am able to use the wireless keyboard.
Is there any way that I can already auto-load bluetooth and connect to my keyboard before I log in?
View 4 Replies
View Related
Jul 13, 2011
I recently compiled a new kernel (2.6.38.8) but it seems I forgot something. Right after grub, when the new kernel is selected (by using the keyboard), the keyboard stops working (it's on usb). When I select the old kernel everything is working nicely.
I actually used the config of the old kernel to configure the new one but excluded some modules before I finally compiled it. Now I'm asking myself which modul did I erroneously throw out?
Edit: A somewhat related question: Is there a log somewhere in the kernel source folder (or someplace else) which shows the kernel compilation process?
View 1 Replies
View Related
Mar 31, 2010
I noticed that ubuntu only detects 1 core on a mini 3.1 dual core. Has anyone the sam issue? Or has someone an idear an what's happening. Already tried 32 bit and 64bit.
View 9 Replies
View Related
Sep 23, 2010
Im having an odd problem with an installation of 10.04 on my Macbook (the white one with firewire, dunno which generation). Sound works fine from built-in speakers, but when i plug in headphones i have no sound at all..
The levels in alsamixer are all fine, so no problem there..
View 3 Replies
View Related
Dec 12, 2010
I've got a final revision of the G4 Mac mini, the 1.5GHz model, dual booting 10.04 LTS and OS X. One of the issues I've had is that the internal speaker doesn't work under Linux, or so it's been reported on various post and sites. It turns out it's a simple matter of flipping some ALSA control options. With an ALSA mixer you must enable both the Speaker and the Headphone to get audio to play over the internal speaker. It will still play over the external headphones/speakers if they are still plugged in. I'm not sure if this is a problem with the ALSA, OSS, PCM or snd_powermac drivers or just something setup wonky in the configs. I've used both GNOME ALSA Mixer GUI and the alsamixer command line tool to do this. The alsamixer tool will mostly work in an X-term, as the F-keys don't pass though. It is fully functional on a console login. I also noticed that audio plays back per-user. When I switch from X to a console he sound is cut off, and when I get logged in as the same user the audio comes right back in.
View 1 Replies
View Related
Mar 10, 2011
I've been attempting to boot Ubuntu on my Mac Mini with absolutely no success. I tried 32-bit and 64-bit versions of 10.10 and 10.04. In all cases, I see the little keyboard and man at the bottom of the screen and then the screen goes black (i.e. my monitor stops receiving input).
My monitor is connect via the HDMI-to-DVI convertor, so is this a driver issue related to that?
View 3 Replies
View Related
Aug 14, 2011
Anywhere from 2 -> 6 times a day, my computer will freeze up. If any audio was playing, it will repeat the last few seconds over and over again. I've been dealing with the problem for a couple of months now, with no solutions.
View 1 Replies
View Related
Jan 19, 2010
I have a MacBook Pro 5,2 with the Mini-DisplayPort for external video. I have the displayport-VGA adapter which works (albeit sometimes at an unideal resolution) with an array of projectors, LCDs and other stuff. Everything except for my nice Samsung SyncMaster 2433. When I plug it in, I get the weird rainbow screwed up look with only the far left hand column looking normal and the rest looking like I've got the wrong refresh rate or something. However, the same setup works when I boot from Karmic to OS X. Note this also didn't work in Jaunty. I'm using the NVidia 185.18.36.
It also did not work through a KVM switch (long shot) but oddly the "Monitor Out" works when I run this monitor through my Dell projector. if I unplug the projector and then plug the monitor in directly without rescanning for displays, the monitor continues to work.
View 1 Replies
View Related
Jul 20, 2010
I am installing Ubuntu 10.04 on my new Mac Mini. It has 2 500GB hard-drives, and I have created a partition for Ubuntu. During installation, however, Ubuntu is not able to detect my disk drive, neither my network interface. So I am not able to 'Partition Disks' which is part of Ubuntu installation. Did any of you encounter this problem? Any solutions or workarounds? Should I setup my disks in anyway before installation or use boot args?
View 2 Replies
View Related
Nov 25, 2010
I just purchased a new Mac Mini 2010 to replace my older Mac Mini 2006 Intel. The problem I am having is that when I boot Ubuntu from the MM 2010 CD-ROM the initial menu that allows you to select a language is displayed, but after that the screen goes blank and stays blank. I am using the HDMI port to DVI output and I am wonder if that could be a cause of the blank screen. Is there a boot command that I can use to allow Ubuntu to display with the HDMI port or other item I need to fix to get Ubuntu CD installer video display to work with my MM 2010?
View 1 Replies
View Related
Sep 15, 2014
I have Debian Jessie 8.0 amd-64 installed. It is a dual boot system with Widnows 8.1 alongside. Both the systems work fine with a few glitches coming at times on jessie. But I assume it should get stabilised with time.
Problem is:
The usb keyboard is no longer detected until the GRUB stage crosses.
* This implies I am unable to press F2 to enter into BIOS
* I am unable to chose Windows 8.1 by using arrow key on the keyboard.
When the default system (first in the grub list), in this case Debian is selected after time runs out then the keyboard comes back to life and works properly thereafter.
So far I have tried the possible solution given at [URL] .... but it did not work.
Some Information
================
$ lsb_release -a
No LSB modules are available.
Distributor ID:Debian
Description:Debian GNU/Linux testing (jessie)
Release:testing
Codename:jessie
$ uname -r
3.13-1-amd64
View 1 Replies
View Related
Oct 25, 2010
I'm using the Rii Mini Keyboard with touch pad on my home theater setup and love it. Does anyone know of a way (other than the mouse settings) to set the sensitivity and settings on the touch pad. There are no touch pad settings under the mouse options and no special drivers loaded (that I can find) for the keyboard and touch pad.The Synaptic touch pad posts that I've found don't seem to apply. Lucid 10.04 64/bit
View 2 Replies
View Related
Apr 20, 2011
just find this mini keyboard,and wondering whether it is interesting to use. I have ever think of getting a remote to control all electronics,but this keyboard can give a total control,Is it similar to remote?
View 1 Replies
View Related
Feb 1, 2010
I had a thread about installing on a Mac and decided to go the VirtualBox route and everything is running splendidly EXCEPT for the fnmode setting in /sys/module/hid_apple.
The problem is that the directory hid_apple does not exist for me to modify the settings for the apple keyboard. I'm assuming that when installing in VB, Ubu assumed it was a PC. Anyone know of a way to get the keyboard config directories in there so I don't have to hit Fn to do Alt-F2? Also, I tried to create the directory (sudo mkdir) and it returned "Cannot create directory...no such file or directory", but not in so many words.
View 1 Replies
View Related
Jun 27, 2011
Computer: Toshiba Satellite Pro L510 laptop, 10.10.This has always happened but I have gotten around it by time-out and putting my menu.list in order. When I first boot the machine (switch on for the day from computer being off) I get to the grub options to select a kernel and I have no keyboard. No up/down arrows so have to go with the kernel on top of the list (not always desirable).
When I get to the log-in screen if I hit restart and go back to the grub screen I have a keyboard and can select any kernel. If I login to the kernel I have full keyboard, no problem. If I then restart, I have keyboard at the grub list.
Nutshell: It is only when starting the computer fresh that the keyboard is dead at grub menu (and then only). Any time after that, once the computer has been switched on, if I restart I have keyboard at grub menu and can select different kernels. (Of course, if I switch the computer off and back on again, no keyboard ...)
View 6 Replies
View Related
Sep 3, 2010
I want to give a new life to my old Mac Mini that has become too weak for Mac OS ...I successfully installed the Ubuntu 9.10 PPC version (alternate) on the machine. EXCEPT for the support of the wifi antenna. Network manager says: "device not ready". I suppose there is a standard tweak to get over this hurdle.
View 5 Replies
View Related
Jan 21, 2011
I have installed Ubuntu 10.10 Minimal on a 2GB USB using CLI and it is working very well after I added a few things. I intend to use it on machines other than my own. But the GRUB boot loader was installed to the main system on my machine and it is booting from there.
During the installation it was said that the bootloader can be installed on a floppy. So I started a new 2 GB stick and tried to install the boot loader on a floppy but my computer does not recognize floppies anymore (seems to be a wider problem with recent distributions).
So I tried to install the bootloader on a different USB stick and and this also did not work. Cannot find recent and relatively easy way to install GRUB boot loader to a stick.
View 3 Replies
View Related
Apr 22, 2010
I was able to make a grub.efi boot loader finally. But in the end it did not make or generate a grub.cfg, so every time i boot using this loader I get the grub bash shell and nothing else. I tried copying the on from my harddrive to the EFI folder on my flash drive but still nothing.
What i did was compile the loader from source using the directions here, then formated a 4 GB flash drive to gpt, and a fat32 File system. Then moved all of the grub items to /efi/grub. Once done i then rebooted, booted to a rEFIt cd and then used it to boot to the USB (the folder is not blessed yet). Then once i got to the loader screen its just a EFI screen, no boot choice Nothing... just a recovery bash. What am i doing wrong... did i do a step wrong, did i compile wrong? What?! could some on PLEASE tell me how to get the EFI grub to make/use a grub.cfg file!
View 4 Replies
View Related
Jun 2, 2010
I've tried Ubuntu awhile ago. I popped the CD then restarted my Mac. Upon restarting I usually pressed the C key. The system boots to the Ubuntu CD but when I get to the language selection thing, I cannot use my keyboard. I had to snag my PC's keyboard from the other room to make it pass through the said window.
Is it normal? I selected the "Try Ubuntu" first to get my feet wet.
View 6 Replies
View Related
Nov 23, 2010
I have tried hours of followed fixes for my situation to no avail.I am stuck in grub line command and cannot get out.I have tried everything under the sun and nothing. every command comes back with disk read error, unrecognized command, etc.I am about ready to throw the mini 9 through the wall.
View 4 Replies
View Related
