Ubuntu :: After Upgrade To 10.04 - Cannot Load Web Pages
Jun 30, 2010
Yesterday I upgraded from 9.10 to 10.04 using the built in upgrader. After upgrading, whenever I open Firefox, it will just say "The connection has timed out" for every page, but I am connected to the internet. Also, w3m will not load any web pages as well. But I am connected to the internet, because pidgin works, apt-get works, ping, and telnet work.
I will ping google.com with success each time, then attempt to load google.com in Firefox and it will say that it cannot connect to the host. I have tried both "Connect directly to the internet" and "Connect using system proxy settings" for Firefox (the system settings are to connect directly to the internet).
I then thought that maybe something was blocking port 80, so I used telnet (telnet google.com 80), and with that, I got the HTML response of [URL]. what can I do to make my computer able to brows the web again? I am running Ubuntu 10.04 with kernel 2.6.32-22 on a Compaq Presario CQ60-417DX Notebook.
Processor: Intel Celeron 900 @ 2.20 GHz
RAM: 3.00 GB
View 3 Replies
ADVERTISEMENT
Mar 15, 2010
Pages do not load on certain sites (such as LinkedIn and Which? for example). The sites themselves load but when I click on links the pages load forever. With Which? I can close FF and open it again and then the link loads but after a few clicks they stop loading. It happens on all browsers (at least I tried FF and Chromium) but OK on Windows.
View 4 Replies
View Related
May 17, 2010
Out of no where Firefox has just decided to not load web pages anymore. I've restarted my router, restarted my wifi card, restarted my computer, *completly* uninstalled Firefox then reinstalled it, still no luck at all. Anyone have any idea how to fix this? I'm stuck using Google Chrome now, I like it but I need the Add-Ons FireFox has (AdBlock Plus, Xmarks, DownThemAll, etc.)
Here are my specs:
Ubuntu 10.04 64bit
Acer Aspire 3680
Intel Celeron M 1.6GHz Single Core
1GiB RAM
40GiB Hard Drive
Basically all it does is sit there saying "Connecting to www.google.com..." for like 15seconds then gives me one of two pages, "The connection has timed out - The server at www.google.com is taking too long to respond." or "Unable to connect - Firefox can't establish a connection to the server at www.google.com."Google Chrome, Skype, Ubuntu's built in messenger, System Update, and so on connect just fine to the internet.
View 5 Replies
View Related
Dec 19, 2010
To see what I mean take a look at the screenshots below.And this screenshot was taken in Windows 7 64-bit of what it should look like.
View 9 Replies
View Related
Jan 5, 2010
I can't seem to fire up any web pages but I can do everything else on my ubuntu box. This seems to have started within the past day or so. My /etc/reslov.conf file looks solid.Again, I can ssh, vnc and ping to the outside but just can't load any web pages.
View 9 Replies
View Related
Mar 30, 2010
Ive just install Midori, and overall I like this browser. But certain pages aren't loading in Midori. Like this forum, Fedoraforum.org. On exactly the same laptop, I can open this page with Firefox. How can I fix this?
View 14 Replies
View Related
Jun 22, 2010
I seem to have stumbled on a problem regarding internet connectivity. My web browser (Firefox or any other web browsers) can't completely load the desired webpages like yahoo.com or even google.com.But as I read different blogs in this forum, I have convinced myself that there is an internet connection.= when I ping different websites, Iseem to get good responses from those sites. Only when I need to browse the webpage do get no results.= ifconfig seems to respond well enough.= even "route" shows the IP my router/gateway correctly. The problem , I think, lies on the proxy settings or the DSN.
View 3 Replies
View Related
Oct 23, 2010
I have an odd problem loading certain webpages (not all) from the New York Times in Firefox.
If I try to load this for instance:http://well.blogs.nytimes.com/2010/1...-shoes-or-not/
the page will not load and I see the text "Waiting for graphics8.nytimes.com..." in the status bar.
I did a complete reinstallation of Firefox and it worked fine (yesterday). Today the problem is back again.
I tried the page on a friend's computer also running Firefox in Ubuntu and it worked fine.
I tried it in Windows Firefox and it worked fine.
I have the same add-ons/extensions in Windows as I have in Ubuntu and, in any case, I have removed them all once and tried the page with the same non-result. I also noted that the same thing happens if I try to load the page in Google Chrome in Ubuntu.
View 2 Replies
View Related
Jul 20, 2011
I just installed 11.04 on my Samsung n130.
It does connect to the router, but when I open a page it does not load it...
It works ok with the ethernet cable.
Edit: after restoring from sleeping mode, it does not see any wireless network, I have to reboot.
View 4 Replies
View Related
Jan 14, 2010
Excuse me if such thread exists already, i carefully searched the forum so i wont create a second one concerning the following problem:So i downloaded (on my new fresh Fujitsu SIEMENS Li3710 running Vista the Ubuntu 9.04 distro.. im a complete Linux noob, but i wanted to give it a second try) so i downloaded it and burned it on the fast laptop, so there wont be any errors caused by low memory during burning I installed and then i went to the Ubuntu desktop - i had all drivers installed. Everything but Amarok sound worked, i turned off my laptop and went doing my job.. The next time i started up my laptop and went on the desktop .. a tradition is to browse the web, so i did that and i couldnt load a single page, except pages with direct IPs i had Skype working just fine and i had a friend there running SuSe and asked him for help. We identified it as a DNS problem, but because of my noobness i couldnt deal with it and i HAD TO switch back to windows, wich i regret so much.
I know that im a noob, but if i have an internet running at its best i can look at forums and resolve my other issues, so im asking for a screenshots on DNS settings so i can fix it the next time i install Ubuntu.Also! I was using cable via PPPoE (and the only terminal command i know is "sudo pppoeconf" ), now im with router, connecting my laptop directly via WI-FI, will i have the same problem and will i have to make settings so i can connect to my router? Because back then i tried to connect to wireless networks and the ones i could connect on XP/Vista/7 i simply couldnt connect on Ubuntu...I really want some real PC knowledge and to use Linux
View 4 Replies
View Related
Jan 13, 2009
I have been using Linux via my Acer Aspire One for a few weeks now without any problem. Suddenly I find I can get a WiFi connection but consistently it fails to load the pages. I have tried 2 connections so I know it's my machine. And probably something I have touched. How to reset the the internet settings or better still can I reset the computer back a few days (like in Windows) to resolve this problem?
View 1 Replies
View Related
May 27, 2010
I have a serious problem relating network connectivity under all Linux distributions. I have tried variety of browsers, but the webpages either load partially or do not load at all. Surprisingly, app manager still works well, and I can download apps at full speed from xterminal or app manager. This became an issue which renders Linux distributions close to useless to me. I am currently connected through a router, but direct connection does not solve the problem. What is more, my phone, Nokia N900 is experiencing the same problem with its web browser. I assume, it's due to the fact that N900 uses full Linux distribution. Internet works just fine under all Windows versions (XP, Vista, 7).
View 1 Replies
View Related
Mar 20, 2010
I have apache running on my server, and also Zoneminder, a surveillance system running on the same machine. Both services runs without glitches, and I think apache's config as well as ZM's config are fine. I am not sure I understand how apache (not to mention the whole thing zoneminder, apache, web browser...) works. Pretty hard to manage when you dont know what you are doing. Also, when I try the supposed to work zoneminder webpage in my web browser, I get nothing (a blank page), or sometimes a "Not found" error message. The latest seems to be from apache because it is the same font as the "It works!" message when I try http://localhost:80
The only bit of information I have so far is in the apache error log (/var/log/httpd/error_log) and it says:
Code:
[Sun Mar 21 00:35:14 2010] [error] [client 192.168.0.100] script '/srv/httpd/htdocs/zm.php' not found or unable to stat
[Sun Mar 21 00:46:04 2010] [error] [client 127.0.0.1] File does not exist: /srv/httpd/htdocs/zm
It seems that the "zm.php" is missing.... That would be why Apache cant find the page?
View 14 Replies
View Related
Aug 19, 2010
I have just terminated a program which used almost all my free RAM space, so most pages from other processes are now in swap. When I need to access another process (e.g. browser), it will reload its pages from swap resulting in a lag. I would like to load all the swapped-out pages into physical memory before I need that process, how can I do this (supposing that I have enough free RAM for this)? The only way I'm thinking of is swapoff -a, then swapon -a again.
View 2 Replies
View Related
Mar 10, 2010
I had started another thread about this but had a terrible subject line. Others may have this issue.Found the answer deep in the bowels of documentation. My question now is " did version 20 mess this up for everyone with dialup"?
View 4 Replies
View Related
Sep 21, 2010
Laptop: HP 6910p Wireless Card: BCM4312 NO issues with wireless in 8.10 (intrepid) - fwcutter driver. Performed clean install of 10.04 (lucid) onto a brand new hard drive (July 2010) - fwcutter driver. NO issues with wireless in 10.04 (lucid) until a few days ago, when. my laptop shutdown because the battery died and I safe-upgraded to 2.6.32-24-generic. Currently I have chronic wireless connectivity issues - slow to non-existent. Ping tests (ping -c6 google.com or ping -c6 4.2.2.1) sometimes reveal 0% loss, sometimes 100% loss, sometimes "unknown host" - within 5 minutes of each other. Regardless of ping results, web pages are consistently slow to load. Skype will also cut out from time to time as the wireless connection vacillates. I have a MacBook Pro which I am using as my (wireless and consistently well-connected) control - and from which I am currently forced to draft this note.
View 9 Replies
View Related
Dec 14, 2010
I am using BSNL WLL (Wireless Local Loop) on my Fedora system to connect to the internet My modem is Huawei ETS-1201, I use wvdial The problem is that, on every linux distribution I tried, Webpages dont load or load incompletely randomly This happens most during peak net traffic. I tried to edit the /etc/ppp/options file to set my MTU and MRU to 576
But, It does not seem to be working. There is no such problem on Windows and I can connect flawlessly I takes several retries to connect to a site. I sometimes become frustrated with this and switch to Windows But as you all know, Windows is not the right OS for people who want more from their computers.
Below my specs:
Intel Core 2 Duo E8400
Intel BOXDG43NB
1GB DDR2 800MHz RAM
WD 320GB 7200rpm HDD
View 1 Replies
View Related
Aug 13, 2010
I have 2 servers that are mirrored. They host 3 separate websites. Two of these websites are regular HTTP and the other is HTTPS with Digest authentication as well. The reason there are 2 servers is because one is a primary and the other secondary in case the primary goes down. Recently I decided to upgrade the secondary server then make it the primary server. I have done most of the configuration and the sites using regular HTTP are working perfectly fine. The page using SSL is not. Apache fails to load and here are the errors I am receiving the the error log file:
Code:
[Fri Aug 13 09:27:00 2010] [warn] RSA server certificate CommonName (CN) `newserver.domain.com' does NOT match server name!?
[Fri Aug 13 09:27:00 2010] [error] Unable to configure RSA server private key
[Fri Aug 13 09:27:00 2010] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch
For the first warning, I cannot find anywhere that says the CN "newserver.domain.com", only what the CN is in the SSL key. I have no idea where to even start with the other errors.
View 1 Replies
View Related
Mar 4, 2010
I am running OpenVZ.I wanted to use the VPSs IP at a particular port to load the Servers Web Pages e.g. The IP 88.88.88.88 is the VPS IP and 77.77.77.77 is the servers main ip.My files are on the main server at /usr/local/pages/
I want to load the page from the URL: https://88.88.88.88:8888
These should load the files from the main server at /usr/local/pages/ Virtuozzo a OpenVZ panel does it. So how is this going to be possible ? Will DNAT do the trick : iptables -t nat -A PREROUTING -p tcp -d 88.88.88.88 --dport 8888 -i eth0 -j DNAT --to-destination 192.168.0.1:8888
View 3 Replies
View Related
Nov 6, 2010
I have Kubuntu installed under windows 7. It finds my wireless connection and says i am connected. even with a wired connection it does the same. When i go to the web browser and try it out. says problem with connection. will include some pictures of "iwconfig" and others.
View 4 Replies
View Related
Apr 16, 2010
I've enabled LDAP authentication on my 2.2.15 Apache server, but now pages load very slowly. As in, 1.515s with it enabled, and 187.4ms without (just the base page, numbers collected via Firebug). Here's my LDAP config (other directives snipped) -
Code:
LoadModule ldap_module modules/mod_ldap.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LDAPSharedCacheSize 500000
LDAPCacheEntries 2048
LDAPCacheTTL 3600
LDAPOpCacheEntries 2048
LDAPOpCacheTTL 3600 LDAPTrustedGlobalCert CA_DER ssl/ldapserver.der
<Directory "/example">
AuthType Basic
AuthBasicProvider ldap
AuthName "intranet credentials"
AuthLDAPURL "ldaps://ldap.example.com/ou=ldap,o=example.com?mail"
Require ldap-group cn=example,grp,ou=memberlist,ou=groups,o=example.com
How can I speed this up, or at least determine why it's so slow?
View 2 Replies
View Related
May 27, 2010
I am using KVM and created four guest Operating systems on it. The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment. One of our website is running on CentOS VM. Right now there is no traffic on the website static HTML pages. I do not have any clue as why it was taking longer time to be accessed.
View 17 Replies
View Related
Nov 23, 2009
I just completed upgrading from F10 to F12. I had a few problems but now everything works just perfect, except my Apache server does'nt execute the PHP pages on the web-server. The php-pages use to work just fine. I have Apache/2.2.13 (Unix), with PHP 5.3.0 (cli) (built: Nov 17 2009 19:19:17). I tried to remove alle PHP rpm-packages and install them again with no luck.
I have checked the httpd.conf file and it include the following lines:
AddType application/x-httpd-php .php5
AddType application/x-httpd-php .php
AddHandler application/x-httpd-php .php
and
LoadModule php5_module modules/libphp5.so
I get a msg. from the last line, that the php5 module is already loaded.
I have restarted httpd-service. I have the following php modules installed:
php-devel-5.3.0-7.fc12.i686
php-cli-5.3.0-7.fc12.i686
php-common-5.3.0-7.fc12.i686
php-5.3.0-7.fc12.i686
php-pdo-5.3.0-7.fc12.i686
php-mysql-5.3.0-7.fc12.i686
Seems that in the new versions of PHP/Apache with F12 you need to write:
<?php .....?> and not just <? ... ?>
View 3 Replies
View Related
Feb 19, 2010
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
View 2 Replies
View Related
Sep 9, 2009
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies
View Related
May 30, 2011
Installed Lucid as a dual boot on Dell Dimension2400. Upgrade Mgr gave me 501 upgrades to install, which Upgrade Mgr did, after which It locks up on login screen. I am getting the following error: [1.809435] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet00:0b:db:a1:a9 [9.412958] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear. Do I need to buy a new ethernet card, or is there a "BUG"?
View 1 Replies
View Related
Sep 27, 2010
I had installed Ubuntu 10.04 within Windows 7nd everything work perfect until this morning. When I turned my laptop on I was told that Grub could'nt find the storage device and was presented with a grub command line
View 4 Replies
View Related
Mar 6, 2011
When I start my computer GRUB starts, but it only says:Grub Loading stage1.5.Grub loading, please wait...and nothing happensHere is what happened before:I had a dual boot on my computer with Windows and Ubuntu. There was also a problem with Windows, but that's another thing. Now I had not upgraded Ubuntu for a long time. I think I still had Ubuntu 8.9 . So I wanted to upgrade and let Ubuntu do it automatically, it showed the upgrade to 9.4. So let it upgrade, but it asked if it had to change menu.lst, but since I had menu.lst modified in the right way, I choose the option to keep the already installed version. But it just kept asking the same question, so 4 or 5 times and a few hours later I choose the option to change it to the default package version. Then it didn't ask this anymore, but it hung at a later stage.
So I waited several hours longer, but it didn't proceed anymore, so I had to shut it down.It shut down OK, but then when I restarted, what I described above happened.Now I have another problem, my disk reader (CD/DVD) doesn't work either, so I cannot simply use a LiveCD.
View 9 Replies
View Related
May 4, 2011
I have successfully upgraded from 10.10 to 11.04, computer was rebooted and I got working Ubuntu Natty. I did not altered any settings and switched computer off. When I tried to boot computer today I got Ubuntu load screen, but OS does not load properly (only load screent, startup sound and that's all).I am able to load terminal as root. How can I troubleshot my problem?
View 1 Replies
View Related
Mar 17, 2010
After an almost flawless upgrade from 9.04 to 9.10, the desktop doesn't quite finish loading: when I log in I am left with unmovable but otherwise usable windows chiefly noticeable by their lack of title bar. I can kick the system into completing a normal startup by right clicking on the desktop and selecting "visual effects/normal" whereupon it pops up with "desktop effects not available" and subsequently the title bars all return and everything works as normal - even compositing (meta city). Something appears to be choking it at the last hurdle. How I might go about debugging it. Failing that, what do I need to purge/reinstall to make it work normally?
View 14 Replies
View Related
