I have an issue with Adobe AIR, which I use to run Tweetdeck. It keeps on asking me to authenticate for my proxy server - every time Tweetdeck tries to load someone's avatar, for instance, which is making it pretty unusable right now.
I'm not sure why it's doing this, other than that I've just upgraded to 9.10 (well, to Mint 8, actually, but I would think the issue is the same). I've got all my proxy settings working, and indeed AIR seems to be able to read the settings from somewhere (it autocompletes the authenticate box with the correct details), but it just doesn't seem to be able to authenticate once and then be done with it, like it had done previously.
when i use the terminal, and i run "sudo apt-get update", there is a notification which says, "407 proxy authentication required". i use the internet of our school which requires its users to log into its proxy server so that the user can have access to the internet. the problem is i cannot run update or install commands through the terminal, though i can connect to the internet through firefox.
On 8.04 when I connect to the internet for work, it normally asks me for proxy authentication. When I type in the correct credentials, it allows me access to the web. For some reason, when I use 10.04 to access the web via firefox or chromium, I do not get the proxy authentication dialog box, so I cannot access the web.
I've just installed Ubuntu Server for the first time with the goal as setting it up as a proxy server for our Apple computers here since I can get neither ISA of OS X Server's firewall to play properly. So far I have the machine authenticating against our OS X OpenLDAP server and multiple NIC's setup ready to be connected to the outside world. My question is does anyone have a preference on what proxy I should be using? So far my search efforts seem to of turned up Squid Proxy as a favorite among Ubuntu users but I can't seem to work out how to get it authenticating against my OpenLDAP server.
I intergrated the CAS on Liferay, it is working fine for single service. Now my goal is to configure Proxy Authentication on CAS to authenticate set of Liferay Services. I used the following services for proxy authentication, but unable to validate it.
How do you get SSH to use a socks proxy? I have tried: Code: ssh -o "connect -5 -S socks_proxy:1080 %h %p" host_server 22 I have tried to use socksify but I am not sure how to setup the client.
i want to setup a proxy authentication on fedora 15 for minimum of 5 users using squid but i had successfully setup a proxy sever on my system and its working perfecly.# vi /etc/squid/squid.conf this was the output.
I need to enter credentials for a system wide proxy, on a fresh install of Kubuntu 10.04. Everything hunky dory, but: Network Settings->Proxy->Authorization has 'username:' and 'password' grayed out all the time; even at 'Manually specify ...'. The only 'alternative' (not to chose from) is 'Prompt as needed'. But I don't get any prompt, and so I'm out of luck. To me, this looks like a bug. Because one should be able to enter a username and a password there, for good.
how can I change the text in the Squid Proxy Authentication Dialog Box...? I would like to change the text "The proxy localhost:3128 is requesting a username and password. The site says: "Squid Proxy Caching Server". Is there a file or a configuration to change the text?
I am using Fedora 12-i386 in my laptop and have installed teamviewer5 for linux. I am unable to connect teamviewer. It always says, "Not Ready, Please Check your Connection". My network needs a proxy authentication. Teamviewer for Windows works well in my desktop having Win XP, in the same network.
I set up the 'Proxy' from Yast and they tested successfully. I can connect to internet, but why am I getting 'ERROR 407 proxy authentication required'?
FYI, my comp is the part of company .NET network with bunch of firewall and security...
i have just installed Red Hat linux 9 workstation ,i have configured the lan ip and successfully ping to other pcs on network ..but problem is internet is not working , i have already set the proxy setting, i have windows environment and running isa server 2006 proxy server ,when i trying to browse any site , isa eroor page occur "error code :407 proxy authentication required" Linus machine couldnot prompt the user credentiall.
Am using Fedora 15, in which i was able to configure the proxy server and authentication. i confirmed this by configuring web broswer and it works. Now the problem is that i want to deploy it out to other computer system(client) i dont want to use the transparent proxy because the Proxy Authentication will not work. I even tried to configure a DHCP server if it will work but i cant still configure for other computer system to work.
I have a problem with the NTLM proxy we use in school. YAST proxy configuration won't work, it just says authentication error. We have to login with the user in DOMAINuser style and a password, in Firefox it works.
I am trying to set up Apache and Webmin so that I can access Webmin by going to [URL]. I am using the direction at [URL] under the "Webmin In A Sub-Directory Via A Proxy" section. I had this setup working before, but I think an update of either Webmin or Apache broke it. Now, I can go the the webpage and I see the login screen. However, when I try to log in, I get an error.
Quote:
Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode I have tried adding the ProxyPassReverseCookieDomain and ProxyPassReverseCookiePath directives to my virtual host config file, but it still doesn't work.
I'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
On a Debian system, I installed Adobe Acrobat Reader using the Linux binary (AdbeRdr9.4.2-1_i486linux_enu.bin) downloaded from Adobe's website. I realized there's a way to install it from a Debian package as opposed to Adobe's binary (and be able to keep up better with security updates), so I want to remove Adobe's version and install the Debian package. What's the right way to uninstall Reader when it was installed this way?
On Ubuntu server 10.10, with a relay smtp server with authentication via postfix; I keep getting 535: Incorrect authentication data. I'm sure my username and password is correct. Heres how I set up postfix: I created a file called smarthosts.conf in my /etc/postfix/ directory that contains the following:
[Code].....
my server uses plain text authentication on port 25. I would like to use security like SSL, but this particular server is unsecured.
Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter ddns-update-style interim; ignore client-updates;
I downloaded Adobe Air, both the rpm and the .bin versions. First I tried the rpm, it went through the motions of installing but just disappeared. then I tied the .bin, got tot the installer, accepted the license, entered my root password, but it stopped installing with "an error occurred. Adobe AIR could not be installed. Install either Gnome Keyring or KDE KWallet before installing Adobe AIR". I opened Kwallet and tried again, but to no avail. I am running OS11.4 64 bit. What can I do to get this thing working?
If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
I need to make a choice on what authentication protocol I want to use for Authentication and Authorization. I was looking at Radius and then literature suggested that Diameter was a better protocol. Keep in mind I need this on a hetrogeneous setup ( linux & windows together). Diameter seemed like a good fit until I discovered that the open source code no longer seems to be maintained ( C/C++).
I was also looking at Kerberos as an option though there is alot overhead with the server. SSL/TLS or EAP? I am looking for simple but secure and am new at the security protocols.
I have a problem with ldap client authentication in ubuntu. I am using rhel5 as openldap server and I configured ubuntu as client, when I am trying to login the following message is coming."su: Authentication service cannot retrieve authentication info. Sorry" But when I do search through "ldapsearch" command output is coming without any errors, Can anybody explain what would be problem.
I've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
I am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
