I am using Fedora 12-i386 in my laptop and have installed teamviewer5 for linux. I am unable to connect teamviewer. It always says, "Not Ready, Please Check your Connection". My network needs a proxy authentication. Teamviewer for Windows works well in my desktop having Win XP, in the same network.
View 1 RepliesWhen trying to use Yum install yumex, I get the error that proxy authentication is required, as below.code...
I saw several similar posts but none seem to resolve this issue. Can someone help me in getting out of the proxy and domain?
i have just installed Red Hat linux 9 workstation ,i have configured the lan ip and successfully ping to other pcs on network ..but problem is internet is not working , i have already set the proxy setting, i have windows environment and running isa server 2006 proxy server ,when i trying to browse any site , isa eroor page occur "error code :407 proxy authentication required" Linus machine couldnot prompt the user credentiall.
View 2 Replies View RelatedI have a network and am using squid proxy with authentication I want to create another subnet without authentication.
View 1 Replies View RelatedAm using Fedora 15, in which i was able to configure the proxy server and authentication. i confirmed this by configuring web broswer and it works. Now the problem is that i want to deploy it out to other computer system(client) i dont want to use the transparent proxy because the Proxy Authentication will not work.
I even tried to configure a DHCP server if it will work but i cant still configure for other computer system to work.
How do you get SSH to use a socks proxy? I have tried:
Code:
ssh -o "connect -5 -S socks_proxy:1080 %h %p" host_server 22
I have tried to use socksify but I am not sure how to setup the client.
I have an issue with Adobe AIR, which I use to run Tweetdeck. It keeps on asking me to authenticate for my proxy server - every time Tweetdeck tries to load someone's avatar, for instance, which is making it pretty unusable right now.
I'm not sure why it's doing this, other than that I've just upgraded to 9.10 (well, to Mint 8, actually, but I would think the issue is the same). I've got all my proxy settings working, and indeed AIR seems to be able to read the settings from somewhere (it autocompletes the authenticate box with the correct details), but it just doesn't seem to be able to authenticate once and then be done with it, like it had done previously.
when i use the terminal, and i run "sudo apt-get update", there is a notification which says, "407 proxy authentication required". i use the internet of our school which requires its users to log into its proxy server so that the user can have access to the internet. the problem is i cannot run update or install commands through the terminal, though i can connect to the internet through firefox.
View 1 Replies View Relatedi want to setup a proxy authentication on fedora 15 for minimum of 5 users using squid but i had successfully setup a proxy sever on my system and its working perfecly.# vi /etc/squid/squid.conf this was the output.
# Recommended minimum configuration:
#
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
[code]....
where will i entered the configuration and what are the configuration?
On 8.04 when I connect to the internet for work, it normally asks me for proxy authentication. When I type in the correct credentials, it allows me access to the web. For some reason, when I use 10.04 to access the web via firefox or chromium, I do not get the proxy authentication dialog box, so I cannot access the web.
View 2 Replies View RelatedI've just installed Ubuntu Server for the first time with the goal as setting it up as a proxy server for our Apple computers here since I can get neither ISA of OS X Server's firewall to play properly. So far I have the machine authenticating against our OS X OpenLDAP server and multiple NIC's setup ready to be connected to the outside world. My question is does anyone have a preference on what proxy I should be using? So far my search efforts seem to of turned up Squid Proxy as a favorite among Ubuntu users but I can't seem to work out how to get it authenticating against my OpenLDAP server.
View 5 Replies View RelatedI intergrated the CAS on Liferay, it is working fine for single service. Now my goal is to configure Proxy Authentication on CAS to authenticate set of Liferay Services. I used the following services for proxy authentication, but unable to validate it.
edu.yale.its.tp.cas.client.filter.proxyCallbackUrl
edu.yale.its.tp.cas.client.filter.authorizedProxy
How to configure Proxy Authentication in web.xml.
I set up the 'Proxy' from Yast and they tested successfully. I can connect to internet, but why am I getting 'ERROR 407 proxy authentication required'?
FYI, my comp is the part of company .NET network with bunch of firewall and security...
How to configure proxy server with SQL table user authenticationon fedora core11
View 1 Replies View RelatedI try to download the Tomcat from my LINUX machine with command:
Code:
wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
I got error as follow:
Code:
[root@s003ap23-test opt]# wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
Setting --verbose (verbose) to 1
[Code]...
I have a problem with the NTLM proxy we use in school. YAST proxy configuration won't work, it just says authentication error. We have to login with the user in DOMAINuser style and a password, in Firefox it works.
View 6 Replies View RelatedI need to enter credentials for a system wide proxy, on a fresh install of Kubuntu 10.04. Everything hunky dory, but: Network Settings->Proxy->Authorization has 'username:' and 'password' grayed out all the time; even at 'Manually specify ...'. The only 'alternative' (not to chose from) is 'Prompt as needed'. But I don't get any prompt, and so I'm out of luck. To me, this looks like a bug. Because one should be able to enter a username and a password there, for good.
View 9 Replies View Relatedhow can I change the text in the Squid Proxy Authentication Dialog Box...? I would like to change the text "The proxy localhost:3128 is requesting a username and password. The site says: "Squid Proxy Caching Server". Is there a file or a configuration to change the text?
View 4 Replies View RelatedI am trying to set up Apache and Webmin so that I can access Webmin by going to [URL]. I am using the direction at [URL] under the "Webmin In A Sub-Directory Via A Proxy" section. I had this setup working before, but I think an update of either Webmin or Apache broke it. Now, I can go the the webpage and I see the login screen. However, when I try to log in, I get an error.
Quote:
Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode I have tried adding the ProxyPassReverseCookieDomain and ProxyPassReverseCookiePath directives to my virtual host config file, but it still doesn't work.
Quote:
# webmin
ProxyPass /webmin/ http://localhost:10000/
ProxyPassReverse /webmin/ http://localhost:10000/
[code].....
I'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
View 3 Replies View RelatedI've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
View 8 Replies View RelatedI am working on fc10. I connect to internet using two connections: with proxy and without proxy. Initially I had some problem in configuring yum for proxy and I resolved it by creating files proxy.sh and proxy.csh in /etc/profile.d with the required details (export_proxy).Now when I connect to my connection without proxy I have some problems .Whenever I try to do yum update I get the following error:
"[URL]: [Errno 12] Timeout: <urlopen error timed out> Trying other mirror. Error: failure: repodata/primary.xml.gz from adobe-linux-i386: [Errno 256] No more mirrors to try." what changes do I need to make in order to use yum in the connection without proxy?
Im trying to install the JAVA on my 9.10 Ubuntu, and im having trouble. First off, when su is typed into terminal and im prompted for my password, i type it in and theres an authentication error. Is the root password something else?
View 3 Replies View RelatedHere is my problem:I work with the BioPerl project. At first, I installed cpan modules without any problem,(eg.) sudo cpan -i CPAN::ModuleI've a proxy connection (university) and I'd configured my proxy settings correctly: perl -MCPAN -eshellIn the beginning it worked, but I don't know why it doens't work today. Here is the outline:
fernando@fer-laptop[fernando] sudo cpan -i Algorithm::Cluster
CPAN: Storable loaded ok (v2.15)
Going to read '/home/fernando/.cpan/Metadata'
[code]....
I have been happily running the (always latest) version of PolarCloud's Tomato software on my LinkSys WRT54G for about 2 years now. I am looking for a way to setup a Proxy Server on my Tomato-based router to use from a remote machine somewhere in the web cloud.The reason for wanting to set this up follows. I normally run Squid on a Ubuntu 8.04 box, which I use while I am away from my LAN at home to browse the net (I like to keep things between me and my ISP, as much as possible . I rely on my proxy server on a daily basis. The way it works is I SSH into my Ubuntu box, and forward squid ports. I then point my browser to the proxy on my box. For various reason, however, I would like to set it up so that I can also do this via my router. So, I would like to be able to ssh to my router (I can already do this), forward the proxy ports, and surf the nets happily via my router at home. I am happy to use existing solutions (if possible), such as privoxy or squid, and am also open to setting up a custom-based solution, as may be necessary.
View 1 Replies View RelatedI want to configure SSH key-based authentication and SSH password Authentication in same machine for different user .
View 1 Replies View RelatedOn Ubuntu server 10.10, with a relay smtp server with authentication via postfix; I keep getting 535: Incorrect authentication data. I'm sure my username and password is correct. Heres how I set up postfix: I created a file called smarthosts.conf in my /etc/postfix/ directory that contains the following:
[Code].....
my server uses plain text authentication on port 25. I would like to use security like SSL, but this particular server is unsecured.
If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
View 3 Replies View RelatedI need to make a choice on what authentication protocol I want to use for Authentication and Authorization. I was looking at Radius and then literature suggested that Diameter was a better protocol. Keep in mind I need this on a hetrogeneous setup ( linux & windows together). Diameter seemed like a good fit until I discovered that the open source code no longer seems to be maintained ( C/C++).
I was also looking at Kerberos as an option though there is alot overhead with the server. SSL/TLS or EAP? I am looking for simple but secure and am new at the security protocols.
I have a problem with ldap client authentication in ubuntu. I am using rhel5 as openldap server and I configured ubuntu as client, when I am trying to login the following message is coming."su: Authentication service cannot retrieve authentication info. Sorry"
But when I do search through "ldapsearch" command output is coming without any errors, Can anybody explain what would be problem.