Ubuntu :: 10 Doesn't Play Well With Scanjet G4010?
Oct 24, 2010
This weekend I installed Ubuntu 10.10 and most everything works well, but it seems that there is no support for my scanner, an HP Scanjet G4010. Both lsusb and sane-find-scanner report the scanner, and I've changed the permissions of the appropriate USB device, but scanimage -L returns "no scanners were identified" and the HPLIP Toolbox cannot find the scanner. Additionally, the Sane site states that it's unsupported.
View 1 Replies
ADVERTISEMENT
Oct 24, 2010
This weekend I installed Ubuntu 10.10 and most everything works well, but it seems that there is no support for my scanner, an HP Scanjet G4010. Both lsusb and sane-find-scanner report the scanner, and I've changed the permissions of the appropriate USB device, but scanimage -L returns "no scanners were identified" and the HPLIP Toolbox cannot find the scanner. Additionally, the Sane site states that it's unsupported. So I'm just posting here as the final resort to see if there is anyone who has a fix or who has been able to get this scanner working
View 6 Replies
View Related
Jan 20, 2011
I have one scanner HP Scanjet G4010 not work with Fedora 14.
View 3 Replies
View Related
Mar 10, 2010
After many days of trying to tweak Ubuntu 9.10 desktop i386. This subject will focus on my dvd drive. ...Here is what I have done, but I'm not sure what I did or still need to do, or to do different. ...
Basically the problem is, I can't play store bought DVDs, but I can play my copies of them.
When using MDPlayer that I added to Ubuntu, I can play the copies of my store bought DVDs, but not the originals. However, when using Ubuntu 9.10's movie player, it wont do anything and I'll have to do a force quit to close it.
I learned that this may because there is a repository of packages that cannot be included into the Ubuntu distribution, as I'm sure you already knew.
...Yet, Most people have worked around these issues.
I came across the Medibuntu site: [url]
Running the Terminal, I added the bash command that adds Medibuntu's repositiry to Ubuntu. It also adds Medibuntu's GPG key to the keyring.
(The sudo wget - etc etc etc --quiet update)
Then I jumped down to the... "This command should be run in the Terminal, after adding the repository:" ...And did that. (sudo sed -e 's/ etc etc etc /medibuntu.list)
View 2 Replies
View Related
Jan 31, 2011
Whenever I plug my Zune in, Rhythmbox recognizes all the songs on it but when I doubleclick on a song to play it, the song doesn't play and Rhythmbox quits. Any suggestions on how to fix it? I'm running a Dell XPS 410 with 4GB RAM and a 1.75 GHz processor.Also, I imported a CD and it plays fine.
View 1 Replies
View Related
Aug 23, 2009
To get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
View 2 Replies
View Related
Feb 19, 2010
I have installed Amarok on clean Ubuntu 9.10 and when I tried to play some mp3 files it just skip them all and finish the play list. I don't know how to fix this, maybe I need something to be installed. On other programs the files works fine. I have some Intel efault sound card.
View 1 Replies
View Related
Apr 26, 2010
i tried to play any kind of video, it doesn't matter what it is and when i double click it to play, the program acts like it's loading it and then disappears. it doesn't matter what program it is, it does the same thing. i'm using ubuntu 9.10. is their anything i can do about that?
View 4 Replies
View Related
May 15, 2010
For a long time, I haven't heard a startup sound from Ubuntu. I do hear the short staccato drum beat when the log in screen is displayed. However, the other longer startup music doesn't play. Not a very serious flaw but since I upgraded to ubuntu 10.04, I thought I'd like to have everything in perfect working order.
View 3 Replies
View Related
Nov 16, 2010
But audio from DVD is working. May be set other output video driver? I'm gonna watch Kung Fu Panda Ubuntu 10.10 with Xfce4.
View 1 Replies
View Related
Jul 1, 2011
After upgrading to 11.04, it takes ~24 seconds to get to the login screen. I unchecked the startup programs I didn't want to load, but that didn't help.
Also, I can't figure out why the Login Sound doesn't play. I've set everything I know of except for where you unmute the startup audio. thought it was in /etc/init.d/alsa(something).
View 9 Replies
View Related
Mar 15, 2011
i m relative new for ubuntu as a technical user, and i m facing problem in installing HP Scanjet N8420, i searched many forums but i m unable to get success on it, i already tried the given code below it works for Canon scanner lide 110, but doesn't works for HP ScanJet N8420.
$ sudo add-apt-repository ppalaxx/random-fixes
$ sudo apt-get update
$ sudo apt-get install libsane sane-utils
View 3 Replies
View Related
Aug 26, 2010
anyone know about a driver to the hp scanjet 4890. i am running ubuntu 10.4 lts. i have heard that there is no driver for linux for that scanner, but those posts were old.
View 1 Replies
View Related
Mar 1, 2010
I am looking for drivers for HP Scanjet 3670,
View 1 Replies
View Related
Jul 30, 2011
This is about a DVD that I have that was recorded from a VCR tape, if that makes any difference. I've been trying to rip the DVD to my hard drive, without much luck. I just tried to play it, and I'm finding that I can't even do that, so maybe I need to put the horse in front of the cart and get playback working. The video has chapters, but no titles.
I've got Kaffiene, Movie Player,VLC and Xine. I've gotten livinia and followed the guide here:[url]
I have libdvdcss (I think that's what it's called). I ran"ln -sf /dev/scd1 /dev/dvd" per a post that leigh123linux gave.
Kaffiene shows " Cannot find plugin for MRL"dvd:///dev/sr0"
Xine shows "The stream "There is no MRL" uses an unsupported codec: video codec MPEG 1/2 (0x0) null"
Movie Player shows the opening frame as a thumbnail, but doesn't play it.
VLC seems to think it's a regular file.
View 2 Replies
View Related
Jan 17, 2010
I recently installed Ubunut 9.10, and I plugged my Ipod 5g nano in, and Rythmbox detected the music and played everything. When I was done, I unplugged everything. Okay, so I did this iver a few days, but everynow and then, Ubuntu would freeze when my ipod was plugged in. Now when I unplug my ipod, it dosent detect any songs. But when I plug it into any computer (mac, windows, linux, etc.) itdetects the music and i can play it. But when unplugged, my ipod says no music is detected.
View 2 Replies
View Related
Mar 17, 2010
when i cut and paste a movie player playlist elsewhere it says "An error occurred, location not found"
though it shows the videos names and in the right order etc.
i can't be the only one noticing that..
View 7 Replies
View Related
Jul 25, 2010
In 10.04 lucid my SONY CRX 140E drive reads data CDs but does not even read and audio CDs. This was not the case in Hardy and I dual boot and just checked in Windows and audio CDs are no problem there.
View 8 Replies
View Related
Dec 26, 2010
ready some 3gp files so had to install the w32codecs and mplayer version from the medibuntu repository. Now I can play back these files perfectly with mplayer from teh command line but when I open them with smplayer there is no video, just (choppy) sound. Xine also plays them back now although it didn't before. I know the first time I ran smplayer on this installation I had to choose which version of mplayer it was running with but don't know if I can do this again to tell it to use the installed medibuntu mplayer. I'm at a bit of a loss as to why the front-end smplayer would not simply play files with the exact same results as mplayer from the CLI. I haven't rebooted since,
View 9 Replies
View Related
Feb 13, 2010
tell me to install hp scanjet g2410 on ubuntu
View 1 Replies
View Related
Feb 16, 2011
I have a system which has been running 8.10 for two years (and am preparing to rebuild). Yesterday I thought to reboot it and am now stuck in a boot-loop getting the "not responding" x.xxxxxx error.
I made no changes prior to the reboot (just felt it was time) other than moving documents off the main drive onto a spare (preparing for the rebuild).
I have tried booting into several of the previous kernels and I ran memtest (flying colors). I keep getting the same error.
I have now built a 10.04 system for this machine. The old 8.10 drive seems to be in perfect order and I was able to pull various files from it.
I thought this would be the end of it but if I boot this new machine with my HP scanner attached via USB (any port) I get the boot-loop as in 8.10.
Again no changes were made to the 8.10 build prior to yesterday's reboot, and that scanner has been attached for more than two years (and working with fair reliability). I have had to alter its USB port or (inclusive) power-cycle it for Ubuntu to find it, but I had to do this when it was attached to an XP machine and so thought nothing of it.
Why has (presumably) the kernel driver suddenly crapped its pants?
Oh, and for the doubters I was able to boot into 10.04, open x-sane (which I prefer over Simple), locate the scanner (after power-cycling it), and scan an image. I just had to attach the scanner to the machine after the kernel loaded (at the login screen).
View 2 Replies
View Related
Jan 11, 2010
How can I get mplayer to play files over the network? It seems like I am not the only one that wants this feature. Does anyone got a work around for this?
View 9 Replies
View Related
Apr 12, 2010
When I used Hulu Desktop on my old integrated VGA video output, it played fairly well. Now I got a new video card and connected my monitor and installed the latest drivers and it doesn't play as well, it buffers and I don't know how to explain the rest.
View 9 Replies
View Related
May 13, 2010
I run lucid. I already have installed Medibuntu and the package libdvdcss2. Nevertheless, I still can't get DragonPlayer to play a DVD properly. Indeed, Dragon starts to play the DVD. However, the image is distorted and you can't recognize anything... This is what the terminal messages say when I start Dragon over the terminal:
Code:
norma@norma:~$ dragon --play-dvd /media/cdrom0/
dragonplayer(2265)/kdeui (kdelibs): Attempt to use QAction "aspect_ratio_menu" with KXMLGUIFactory!
dragonplayer(2265)/kdeui (kdelibs): Attempt to use QAction "audio_channels_menu" with KXMLGUIFactory!
dragonplayer(2265)/kdeui (kdelibs): Attempt to use QAction "subtitle_channels_menu" with KXMLGUIFactory!
libdvdnav: Using dvdnav version 1.1.17 from http://xine.sf.net
[Code].....
View 2 Replies
View Related
May 25, 2010
i installed ubuntu 10.04 on my desktop pc. I previously used 8.10 without any problems. Now I have a problem with amarok. I can't play any music at all. i tried to find what the problem was but i don't seem to succeed so far.
View 1 Replies
View Related
Apr 30, 2011
is there a way to make it work with .ape files? i try to open ape files and it will open instead a prompt window in songbird asking which program to open the file with.
View 3 Replies
View Related
Feb 14, 2011
I am using Ubuntu 10.04 and 10.10 and hp scanjet 3770 does not detect in ubuntu 10.04 ,even tried with xsane and simple scan but it doesnot detect.
View 1 Replies
View Related
Jun 17, 2010
I downloaded a video in .m4v format and I only use TOTEM to watch videos.
When the player start the video, totem look for by Quicktime demuxer, then it finds gstreamer-plugins-good.i686 to install. I click the "Install" button, but after it show that all packages are plugin already installed.
And after, it shows a ERROR
How do I do the TOTEM works with .m4v format ?
View 3 Replies
View Related
Apr 16, 2011
Surprisingly, VLC doesn't play shockwave files. Can anyone recommend a shockwave player for Linux?
View 5 Replies
View Related
Jun 3, 2011
I can eventually use the ssd for a Gentoo install but it takes too much work(more than it should). What happens is that every live or install cd I've tried automatically decides that the ssd is a raid device and sets it up as raid with double the size. Its 32GB and its set up as 64GB. Of course it doesn't work.
I have to manually unmount, turn off dmraid, install and then disable dmraid completely(I have trouble doing this on OpenSuse). The SSD I'm using is a Patriot100 MLC 32GB. Other SSD's that I've tried have no problem being found and manipulated with cfdisk, fdisk or parted but my Patriot SSD just doesn't want to play nice.
View 1 Replies
View Related
