Software :: Hp Scanjet 3770 Driver For Ubuntu 10.04 - Does Not Detect
Feb 14, 2011I am using Ubuntu 10.04 and 10.10 and hp scanjet 3770 does not detect in ubuntu 10.04 ,even tried with xsane and simple scan but it doesnot detect.
View 1 Replies
ADVERTISEMENT
Ubuntu :: Hp Scanjet 4890 - No Driver?
Aug 26, 2010anyone know about a driver to the hp scanjet 4890. i am running ubuntu 10.4 lts. i have heard that there is no driver for linux for that scanner, but those posts were old.
View 1 Replies View RelatedUbuntu :: Detect And Install A Mic Device Driver?
Jan 8, 2010how to detect and install a mic device driver? i only plug and play the mic in xp.
View 1 Replies View RelatedUbuntu Networking :: Cannot Activate Detect Wireless Driver
Sep 28, 2010I installed ubuntu 10.04 alternate version recently. I am able to install broadcom STA wireless driver for model 4321. Even if it is listed under System>Hardware Driver, it gives me an error when I try to activate it. It asks me to read the file var/log/jockey.log.
I read the file and i found this:
/sys/module/wl/drivers does not exist, cannot rebind wl drivers.
BroadcomWLHandler Enabled(). knod disabled, bcm43xx: blacklisted, b43: blacklisted, b43: blacklisted.
Debian :: Nvidia Driver Won't Detect Resolution
Dec 18, 2010 The nouvea drivers work with some xrandr magic, but the closed-source drivers won't. They fail to detect a possible resolution over 640x480. My monitor has a native resolution of 1440x900 @ 60hz. I've tried to modify my xorg.conf, but to no avail. I installed the latest nvidia drivers from the site instead of the repo drivers, version: 260.19.29, this is my xorg.conf, basically a standard xorg file:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.nvidia.com) Wed Dec 8 12:27:39 PST 2010
Section "ServerLayout"
[code]....
Software :: Linux Installation CD Cannot Detect The HDD \ Add The Driver?
Dec 18, 2010I have to install a linux destribution (Ubuntu 2.6.21) on an embedded PC which contains a FlashCard instead of the HDD.On the bootup, the installation cannot start since it cannot detect the FlashCard on which it will make the installation; therefor, i have to add the driver of this FlashCard to ISO CD
View 2 Replies View RelatedUbuntu Multimedia :: Mplayer Can't Detect VDPAU With Recent NVIDA Driver
Feb 10, 2011I have a nVIDIA Geforce 8500 GT on my Ubuntu system.and have the latest 260.19.36 driver installed.the Mplayer was from SVN checkout also the latest version.but the configure script from mplayer can't detect VDPAU on my system. just give me the output like this
Check VDPAU .... No If I force Enable the VDPAU. the make process won't be successful.just googled, most article that I can find about Mplayer and VDPAU is out of date.
Networking :: Driver - Unable To Detect Any Wireless Networks
Mar 9, 2011Right so I just bought an Acer TimelineX with a Broadcom BCM43225 BCM43225 802.11b/g/n WiFi card. With this card I am not able to detect any wireless networks and after googling around I found out other people have had similar issues. But my problem is kind of unique in the sense that I'm using Backtrack as my Linux distribution (I'm not a blackhat or anything, more of an enthusiast with no malicious intentions) Also I'm not a God at Linux so if you have any solutions please be verbose! I tried the following: [URL] But the Makefile spits out a syntax error. (Makefile:29: *** missing separator. Stop.)
[Code]....
Programming :: Detect Which Module/driver A Network Interface Use?
Dec 28, 2010In C++ or C, is there anyway to detect the name of the module or driver currently used by a network interface card (either wired or wireless, INCLUDING USB DEVICES)?My application must have this feature. I just want to detect whether the module / driver is ndiswrapper or not.
View 4 Replies View RelatedHardware :: LAN Driver / Doesnot Detect Lan Card And The Light Goes Off While Boot?
Oct 3, 2010I have Centos5.3 64 bit installed. My board in GIGABYTE GA-G31M-S2L Mother Board. Linux doesnot detect my lan card and the light goes off while I boot into linux but it works well on XP.
What will I do ?
Ubuntu :: Install HP ScanJet N8420?
Mar 15, 2011i m relative new for ubuntu as a technical user, and i m facing problem in installing HP Scanjet N8420, i searched many forums but i m unable to get success on it, i already tried the given code below it works for Canon scanner lide 110, but doesn't works for HP ScanJet N8420.
$ sudo add-apt-repository ppalaxx/random-fixes
$ sudo apt-get update
$ sudo apt-get install libsane sane-utils
Ubuntu :: Drivers For HP Scanjet 3670?
Mar 1, 2010I am looking for drivers for HP Scanjet 3670,
View 1 Replies View RelatedUbuntu :: Not Support HP Scanjet G4010
Oct 24, 2010This weekend I installed Ubuntu 10.10 and most everything works well, but it seems that there is no support for my scanner, an HP Scanjet G4010. Both lsusb and sane-find-scanner report the scanner, and I've changed the permissions of the appropriate USB device, but scanimage -L returns "no scanners were identified" and the HPLIP Toolbox cannot find the scanner. Additionally, the Sane site states that it's unsupported. So I'm just posting here as the final resort to see if there is anyone who has a fix or who has been able to get this scanner working
View 6 Replies View RelatedUbuntu Installation :: How To Install Hp Scanjet G2410
Feb 13, 2010tell me to install hp scanjet g2410 on ubuntu
View 1 Replies View RelatedUbuntu :: 10 Doesn't Play Well With Scanjet G4010?
Oct 24, 2010This weekend I installed Ubuntu 10.10 and most everything works well, but it seems that there is no support for my scanner, an HP Scanjet G4010. Both lsusb and sane-find-scanner report the scanner, and I've changed the permissions of the appropriate USB device, but scanimage -L returns "no scanners were identified" and the HPLIP Toolbox cannot find the scanner. Additionally, the Sane site states that it's unsupported.
View 1 Replies View RelatedUbuntu :: ScanJet 6200c Causes Boot-Loop
Feb 16, 2011I have a system which has been running 8.10 for two years (and am preparing to rebuild). Yesterday I thought to reboot it and am now stuck in a boot-loop getting the "not responding" x.xxxxxx error.
I made no changes prior to the reboot (just felt it was time) other than moving documents off the main drive onto a spare (preparing for the rebuild).
I have tried booting into several of the previous kernels and I ran memtest (flying colors). I keep getting the same error.
I have now built a 10.04 system for this machine. The old 8.10 drive seems to be in perfect order and I was able to pull various files from it.
I thought this would be the end of it but if I boot this new machine with my HP scanner attached via USB (any port) I get the boot-loop as in 8.10.
Again no changes were made to the 8.10 build prior to yesterday's reboot, and that scanner has been attached for more than two years (and working with fair reliability). I have had to alter its USB port or (inclusive) power-cycle it for Ubuntu to find it, but I had to do this when it was attached to an XP machine and so thought nothing of it.
Why has (presumably) the kernel driver suddenly crapped its pants?
Oh, and for the doubters I was able to boot into 10.04, open x-sane (which I prefer over Simple), locate the scanner (after power-cycling it), and scan an image. I just had to attach the scanner to the machine after the kernel loaded (at the login screen).
Fedora :: HP Scanjet G4010 Not Work With 14
Jan 20, 2011I have one scanner HP Scanjet G4010 not work with Fedora 14.
View 3 Replies View RelatedHardware :: HP Scanjet 8250 Trying To Use ADF - Getting Error-15
Mar 9, 2011I am not a newbie, but not especially knowledgeable (working on it) I am using Ubuntu 10.10 on an HP Pavilion dv7 'Entertainment PC' laptop. (I know, I know... but HP has the 'PC' nomenclature printed on the case.) 4 GB ram, AMD Turion X2 2000mhz, '17" screen', 750GB hard drive space, DVD-CD RW drive. I have an HP ScanJet 8250 linked by USB 2.0, running either Sane or X-Sane and the ADF is driving me IN-sane (LOL)
The scanner works wonderful in flatbed mode, but when I try and use the ADF it goes through the motions until the dialog reports that receiving data has commenced. At that point the screen on the scanner reports error 15. The auto feed never really starts. I have tested the scanner in Vista (gasp-wheeze) and the ADF works perfectly there, with HP's software.
General :: Any Distros That Support An HP Scanjet 4850?
Oct 2, 2010It seems I've cleverly ended up with a distro (PCLinuxOS) that supports almost every HP scanner except the one I own. Is this scanner supported by any other Linux flavors?
View 3 Replies View RelatedDebian Hardware :: Can't Get HP ScanJet 8200 In Jessie To Work
Apr 15, 2015I'm fairly new to linux. A few months ago I installed Debian Jessie and for the most part everything has gone pretty smoothly. The last piece of hardware I have to get working is my ScanJet 8200 flatbed scanner. From the SANE documentations, I know the hardware is supported, so I assume I must be doing something wrong with setup. It is correctly identified using lsusb:
Code: Select allroot@debian:/home/jessiesgirl# lsusb
Bus 002 Device 002: ID 8087:8001 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.
[code]....
I get an error. Trying to use an application like SimpleScan give me an error telling me that it is unable to connect to the scanner.
Hardware :: Installing HP Flatbed Scanner Scanjet 3200C
Apr 11, 2011Just found out that my old parallel port scanner will work with Linux (SANE told me so...). Since I have a laptop hp compaq nx9010 (Ubuntu 10.10) equipped with a parallel port I thought maybe I could take that into use. Question is: How? And do I have to have a printer connected to the scanner too?
View 14 Replies View RelatedFedora Installation :: Device Driver For Usb To Detect Device?
Sep 19, 2009I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies View RelatedDebian Hardware :: Scanner HP Scanjet 3570c And Squeeze - Does Not Support
Nov 20, 2010Is there a way to get this scanner to work o.k. in Debian Squeeze? I used it under Windoes/XP but had to get rid of that OS because of a brand-new Lenovo PC. Vista does not support TWAIN drivers anymore as far as I know, so it looks that I am "sunk" unless...
View 1 Replies View RelatedFedora Hardware :: Sane Drivers And A Scanjet HP4570 Scanner
Mar 21, 2011I am having a problem with the Sane Drivers and a Scanjet HP4570 scanner. I have sane-backends-1.0.21-6.fc14 and I am running on x86_64 machine. Other info in my signature below. I have verified that the specific Scanner works as I have installed it on a Win Machine. I ran yum provides *libsane* . Results with respect to the hp5590 libs was --->
[Code]....
How to get the Scanner working, as I would expect it to work out of the box. It is one of the scanners that is completely supported, as per SANE web page info. I also have a hp3300c and it found that immediately.
OpenSUSE Hardware :: Scanner Hp Scanjet 3570c - Only Scan In Color
Feb 10, 2009Whenever I try to scan documents (OpenSuse 11.1) with any of the available tools (such as scanlite, kooka, or xsane), I can only scan in color. Moreover, the result is basically unusable. I shows a turquoise background of differing intensity at various places. Why isn't there a possibility to scan black and white, grayscale, etc.? Seems like scanning still is a problem in Linux. I really don't want to have to "fall back" to M$-Windows for scanning, but that seems to be the only solution at the moment
View 8 Replies View RelatedOpenSUSE Hardware :: Hp Scanjet 3300c And Libusb Errors On 11.2 - System Freezes Up
Feb 12, 2010I've been using this scanner on various suse builds all the way back to version 8. This week I installed OpenSuse on a brand new computer and when I run xsane, I receive these messages.
[Code]....
The scanner will scan for a few seconds and then the entire system freezes up.
Debian Multimedia :: XOrg Auto-detect Failing To Detect Max Screen Resolution
May 29, 2011I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
Fedora Hardware :: Endless USB Loop - Detect - Disable - Detect
May 2, 2010I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
Debian :: Where To Find The Fw-detect Command ? (for Firmware / Wireless Detect)
Jan 12, 2010Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
General :: Ubuntu Saving A Scan To "Document" File Using A HP Scanjet 3500c ?
Feb 22, 2010Request help with scanjet 3500c operation. xSane .996 in Ubuntu sees scanjet and scans. As soon as scan completes, the xSane windows(2) disappears and there are no copies in the intended save folder in Documents. Upon original attempt, the xsane windows had an additional third "Preview" window which has not returned since that first scan attempt?
One is not a computer guru by any imagination!
Info; the scanjet worked very well on the other "doze OS" and seems now, does not in the Ubuntu OS. In Doze, there was also a program for a HP PhotoSmart 3200 running and when I added the scanjet it might have been happy with that driver. Currently I do not have access to the driver disc for the 3200 with me. Too, it now takes ~45+ seconds for the scanjet to begin as compared to 2 - 3 seconds on doze.
Some internet self help searching seems to suggest the xSane 1.0.18 is the driver choice to use with the HP 3500c scanjet. When attempting to download, an archive "Failed" notice appears. I am a bit lost from here.
