Ubuntu :: 10.04 - Close My Lid Or Physically Click To Hibernate - Screen Goes Black
May 4, 2010
When I updated from 9.10 to 10.04, the only thing I noticed immediately was that the Application menu and the things next to (Similar to window's Start button). That's still gone. I also am having problems with my hibernate. Whether I close my lid or physically click to hibernate, all that happens is my screen goes black but doesn't shut off all the way and the power button does nothing.
View 7 Replies
ADVERTISEMENT
Jul 4, 2010
out of no where it seems ubuntu no longer wants to cooperate when suspending/hibernating. the screen will just turn to a black screen without shutting down. each time i have to maually power down my laptop.
View 1 Replies
View Related
May 1, 2011
I recently upgraded to Ubuntu 11.04. I didn't really find the Unity interface useable (I didn't like Ubuntu Netbook Edition for this exact reason) and am running it in Classic mode. I have a Acer Aspire One D255, Intel Atom processor, etc. When I start the computer up from a hibernate, the screen goes black with a set of random colored pixels at the top corner. I have a mouse but nothing else.
View 4 Replies
View Related
Feb 26, 2011
I am having some pain with my new Squeeze installation, I am not sure if I am asking to much of it or it is an easy fix.
Firstly my system is laptop which I regularly plug a second monitor into. The video adaptor is an ATI HD4550 mobile.
My problem is that when ever suspend or hibernate my system, and even sometime when I boot up the screen(s) are just blank, although sometime they don't, it always happens if I suspend by closing the lid of my laptop, and only sometime happend with through Gnome is go ->System->Shutdown->Suspend. This is really annoying.
Another issue which I think is connected is that as I said I have a second monitor (most of the time) and when I boot up then it works until I log in, then a message pops up say the configuration can not be applied and it revert to Mirror mode or it does this thing where it places the second screen inside (virtually) the built in Laptop panel, it will not let me fix this through the monitors dialog just displaying the same message. I can fix this by doing
invoke-rc.d gmd3 restart
This gets as far as killing Gnome them it prints an error the to console, at which point Imopen a new terminal by ctrl+alt+f2 and
invoke-rc.d gmd3 stop
invoke-rc.d gmd3 start
then it works fine and even remember that I set the secondary screen to be the primary monitor through xrandr.
I tried install fgrlx drivers instead but it didn't really fix the issue, so I removed them.
View 5 Replies
View Related
Mar 18, 2010
I am using ubuntu 9.10 and when i close the lid of the laptop it does not hibernate or suspend?
what do i do?
View 1 Replies
View Related
Apr 22, 2011
I've been using this feature since Win3.1 days. Double-click the menu button on the top-left of the window to close it.It doesn't work for me right now in KDE, and I can't find any option to enable it. Googling gave a few hits of people requesting this feature in gnome, but no clear instructions on how to enable it in KDE or whether it's possible. (Though perhaps my Google-fu is just weak...)
View 3 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
Jan 11, 2011
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies
View Related
Oct 4, 2010
All is in the thread title. When I log back in after suspend or hibernate I get a lot of flickering on the screen. I noticed (I think) that it calms down a bit when streaming video from the net, if that gives any clue...
I'm using a dual boot with Vista basic/lucid lynx on an Acer Aspire 5100 laptop.
View 1 Replies
View Related
Jan 12, 2011
Ok so I'm still a bit of a Ubuntu n00b and I just installed 10.04 on my new laptop (Asus U35F) and it's working pretty well except for one problem.. Every time the laptop goes to sleep/suspends/hibernates, when I try to resume it again it hangs. So I end up seeing the screen to re-log in and I can usually move my mouse around and start typing my password in and all of that for maybe a second, but after that it just freezes!
Especially since right now Ubuntu is the only operating system I have running, and since I use this in school and need to conserve battery as much as possible so it stays running through 6 hours of class, I really need to get this fixed up soon..
View 9 Replies
View Related
Apr 29, 2010
I try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?
View 4 Replies
View Related
Jul 29, 2010
running 10.04 Netbook edition. I would like my screen to lock after the netbook goes to sleep but NOT after it enters the screensaver. is this possible? i use my laptop to read in the university a lot and to save power tell it to go into black screensaver after a minute of inactivity. if i enable the lock option i have to enter the password each and every time after the black screensaver activates. but if i deactivate this option and then put the netbook into sleep/hibernate mode it doesn't ask for a password (which i would like) is there any way configure separate passwords for these instances or are they firmly linked?
View 2 Replies
View Related
Oct 1, 2010
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies
View Related
Jun 25, 2011
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
View 4 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Nov 30, 2010
I have Ubuntu 10.04 running kernel .26 installed on my Dell Dimension 2350 with 512mb of memory. The problem I have been having is, When I am using the computer mostly Internet stuff for no reason the monitor will go black then on the screen it will be at a terminal screen, kind of like when you start up the computer, I don't remember what is all on it but the last thing in the list was: checking battery state: OK after that the screen will flash in multiple colors and then it goes into a loop of just black screen than a colorful flash and back over to a black screen. the only way I can fix that is by holding down the power button. this will happen mostly on face-book on the games and just on the profile page, but it does happen just checking my gmail or play solitaire it does this around 4-8 times a day.
View 3 Replies
View Related
May 16, 2011
I've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
View 9 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jan 8, 2010
I would like to disable the login screen when the computer returns from suspension and hibernation, so that it will automatically log me back in. I am using Ubuntu 9.10.When I come back from suspension, for some reason, my key board does not work in the login screen and I cannot type my password.
View 9 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Oct 9, 2010
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
View 1 Replies
View Related
Jun 14, 2011
I am using debian 6 on an acer 5338, intel 3d integrated graphics (don't know the exact type)
When I hibernate and restore the display/fonts can be corrupted. It can be fixed by logging out and back in. Switching virtual terminals (ctrl-alt-f?) has no effect. Is there a better fix?
View 1 Replies
View Related
Jan 25, 2011
This obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies
View Related
Jun 22, 2010
Before I go any further let me make it perfectly clear that this post is not in regards to Shuttleworth's recent decision to move the "titlebar buttons". I honestly don't care and in fact it saves me time since I've always moved the close button to the left side and then removed the minimize and maximize buttons anyway.This problem is made even more annoying because I thought we were all done with it. I've been back and forth between distros, KDE, and GNOME since 2000. . . I would run head first into this issue often out of nowhere. . . I feel like I'm back in 2003 again.
According to Fitt's Law, corners and edges have infinite width as far as the user is concerned, one of the reasons I have loved GNOME for so long now is because of the use of corners, so imagine my surprise when I can no longer simply throw my mouse cursor up into the corner and simply CLOSE the maximized window that I'm currently using, instead it drags the window. This is obnoxious and useless. I can already grab at any other part of the top edge of the screen outside of the far corner in order to drag a window, why is this happening again? It is SO frustrating particularly since GNOME is supposed to be so damned concerned with usability.
I think this change might have something to do with that monstrosity known as gnome-shell. I guess they were figuring that with the proposed 2.30/3.0 switch over to this new window manager, they could simply do whatever they like with metacity. . . or maybe gnome-shell USES the same configurations as metacity (seems plausible), all that I know is that this truly pisses me off.It may seem trivial but it's a daily use factor for me and I have no way of changing the behavior. I just want to be able to throw my mouse in a corner and click, it never seemed that big of an issue in the past, I don't see why the developer(s) saw the need to change this.
And to forestall all those that would ask me to switch from metacity to compiz or vice-versa, it's with both and I am NOT going to use compiz's own digusting window manager themes, I like my metacity themes.My other choices are KDE, enlightenment, openbox or Xfce, Well the first two are travesties since I'm used to my GNOME applications and they don't look good in those DE's, the third looks like crap (to me) and Xfce has corner close button functionality only per theme (some themes do and some don't)
View 5 Replies
View Related
Jul 30, 2010
Last night everything was fine and running normally.When I booted up today all my windows have no borders and the maximize/minimize/close buttons are all gone! WTF? Did somebody eat them?I have read many threads with several fixes but none has worked for me I have uninstalled emerald as I thought that may be the cause, but it's still the same.Screen effects are still present (wobbly windows).
View 9 Replies
View Related
Oct 24, 2010
i want to remove shutdown/restart/hibernate buttons from my gdm login screen on ubuntu 10.10. if i disable these buttons with ubuntu tweak or gdm2setup it is just ignored and all buttons are still there.
View 9 Replies
View Related
Mar 30, 2011
Trying to hibernate causes a blank screen to show up with a blinking text cursor. I have to force restart to get it working again.
View 2 Replies
View Related
Feb 1, 2011
When I press the power button and select 'Hibernate' I get a text string come up on the screen. The last characters are "fail: -6". There is more to it but it's there and gone so quickly I haven't written the rest of it down yet. What this might be?
View 3 Replies
View Related
