Ubuntu :: Hangs On Suspend/hibernate Screen?
Jan 12, 2011
Ok so I'm still a bit of a Ubuntu n00b and I just installed 10.04 on my new laptop (Asus U35F) and it's working pretty well except for one problem.. Every time the laptop goes to sleep/suspends/hibernates, when I try to resume it again it hangs. So I end up seeing the screen to re-log in and I can usually move my mouse around and start typing my password in and all of that for maybe a second, but after that it just freezes!
Especially since right now Ubuntu is the only operating system I have running, and since I use this in school and need to conserve battery as much as possible so it stays running through 6 hours of class, I really need to get this fixed up soon..
View 9 Replies
ADVERTISEMENT
Mar 16, 2010
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
View 2 Replies
View Related
Jul 4, 2010
out of no where it seems ubuntu no longer wants to cooperate when suspending/hibernating. the screen will just turn to a black screen without shutting down. each time i have to maually power down my laptop.
View 1 Replies
View Related
Oct 4, 2010
All is in the thread title. When I log back in after suspend or hibernate I get a lot of flickering on the screen. I noticed (I think) that it calms down a bit when streaming video from the net, if that gives any clue...
I'm using a dual boot with Vista basic/lucid lynx on an Acer Aspire 5100 laptop.
View 1 Replies
View Related
Feb 26, 2011
I am having some pain with my new Squeeze installation, I am not sure if I am asking to much of it or it is an easy fix.
Firstly my system is laptop which I regularly plug a second monitor into. The video adaptor is an ATI HD4550 mobile.
My problem is that when ever suspend or hibernate my system, and even sometime when I boot up the screen(s) are just blank, although sometime they don't, it always happens if I suspend by closing the lid of my laptop, and only sometime happend with through Gnome is go ->System->Shutdown->Suspend. This is really annoying.
Another issue which I think is connected is that as I said I have a second monitor (most of the time) and when I boot up then it works until I log in, then a message pops up say the configuration can not be applied and it revert to Mirror mode or it does this thing where it places the second screen inside (virtually) the built in Laptop panel, it will not let me fix this through the monitors dialog just displaying the same message. I can fix this by doing
invoke-rc.d gmd3 restart
This gets as far as killing Gnome them it prints an error the to console, at which point Imopen a new terminal by ctrl+alt+f2 and
invoke-rc.d gmd3 stop
invoke-rc.d gmd3 start
then it works fine and even remember that I set the secondary screen to be the primary monitor through xrandr.
I tried install fgrlx drivers instead but it didn't really fix the issue, so I removed them.
View 5 Replies
View Related
Jan 8, 2010
I would like to disable the login screen when the computer returns from suspension and hibernation, so that it will automatically log me back in. I am using Ubuntu 9.10.When I come back from suspension, for some reason, my key board does not work in the login screen and I cannot type my password.
View 9 Replies
View Related
Apr 13, 2010
I recently installed Ubuntu 10.04 Lucid Lynx. When I partitioned my HDD, I ran out of available partitions and so couldn't make a Swap Partition.I pushed on anyway, because I read here that you can create a Swap File instead of a partition that does the same thing. I've made the Swap File and it's activated (I know because during shutdown there's a message that flashes very quickly that says "Deactivating Swap [OK]".
But here's the real problem. My Ubuntu refuses to Suspend or Hibernate. The screen just goes black and the backlight stays on. Since one of the main functions of the swap file is to facilitate Suspend and Hibernate,I upgraded from 9.10 Karmic Koala, which suspended and hibernated normally.
View 9 Replies
View Related
Mar 15, 2010
kubuntu 9.10, KDE 4.4.1, Nvidia driver 195
jeff@jeff-lappy:~$ sudo hibernate hibernate:Warning: Tuxonice binary signature file not found. Some modules failed to unload: nvidia hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
I even installed this tuxonice thing but to no avail...
View 2 Replies
View Related
May 4, 2010
I can Suspend or Hibernate my Gateway notebook but I have no idea how to wake it up.The power button is set to suspend or hibernate....I not sure which it does, but I can't wake the computer up.
View 9 Replies
View Related
Oct 15, 2010
My suspend and hibernate buttons are not working. When I try to return from a suspend, I do not get a kernel panic, but nothing loads onto the screen.
View 7 Replies
View Related
Jan 12, 2011
which ubuntu log file records when a suspend happened?I was ssh'ing into my ubuntu box periodically yesterday, when I discovered that it was no longer reachable. On getting home last night I discovered that it was still switched on, but I think in suspend mode as moving the mouse brought it back to life. The clock however, still showed 12:15pm, which is roughly when I stopped being able to ssh to it. I'd like to see the logs to confirm this.
View 9 Replies
View Related
Feb 12, 2011
My Ubuntu 10.10 on my laptop Lenovo T400 is not able to suspend or hibernate. Whenever I click Suspend or Hibernate in Startup options of the OS: * the moon LED on the bottom of the lid flashes a few seconds, the screen quickly shows something like "some devices fail to suspend, error 5", * and then the moon LED goes off and the display still has ambient light illumination. I suppose in suspend or hibernation state, the display should have no illumination, just like when the laptop is turned off, right? * If I press any key, the unlock screen dialogue will pop out. I have installed 'acpi-support' and 'hibernate 1.99-1.1'. But I don't know how to use these methods to suspend or hibernate my OS. Are they by commands in terminate, or can they be called by clicking Suspend or Hibernate in Startup options of the OS? For example, I type the hibernation command and it shows something is missing although I have installed "tuxonice-userui" ( I don't know if it will provide Tuxonice binary signature file):
Code:
$ sudo hibernate
hibernate:Warning: Tuxonice binary signature file not found.
[Code]....
View 2 Replies
View Related
Jan 15, 2010
I've a MSI V601 laptop that won't come out from neither suspend nor hibernate and I tried almost everything so far...what shall I do?
View 1 Replies
View Related
Feb 25, 2010
I think it might have to do with an app I installed called Jupiter (http://sourceforge.net/projects/jupiter/) that missed with my power configs, I removed it but I still can't hibernate or suspend. Whenever I try to do either, my screen fades to black and nothing happens. If I move the mouse or touch the keyboard, it comes back.
View 5 Replies
View Related
Apr 7, 2010
I just got a Dell Inspiron 1764 and am dual booting it with Win7 and Ubuntu 9.10.Whenever I hibernate or suspend, it goes through everything fine, but then when I resume it just boots to a black screen and I have to do a hard shutdown. Is there a fix for this? I know it's a fairly common issue.
View 1 Replies
View Related
May 8, 2010
I was looking for a way to disable the Suspend and Hibernate options from the logout menu as my laptop hangs on both and requires unplugging/battery removal to restart.
I found a few pages with instructions for older Ubuntu versions but I didn't come across anything that applied directly to 10.04 Lucid Lynx so I thought I'd post what I found worked for me on 10.04.
Open a Terminal from the Applications>Accessories>Terminal. Because the file you will be editing requires root privileges to edit, you will need to use the sudo command:
Code:
sudo gedit /usr/share/polkit-1/actions/org.freedesktop.upower.policy
Enter your password. This will then open the settings file in the text editor with the needed permissions (opening the file directly with the editor you will get an error message if you try to save the file). There are two sections in this file, the first for suspend and the second for hibernate. Near the end of each section will be a line with:
Code:
<allow_active>yes</allow_active>
Change this from Yes to No to disable. Save the changes and reboot.
Code:
<allow_active>no</allow_active>
Now the power menu will not display these options. To reverse changes just repeat the above and change from no back to yes.
View 6 Replies
View Related
May 9, 2010
I've got a Thinkpad X31 with ATI M6 Ly card. Since Karmic, and Lucid, I get no suspend/hibernate/resume. If/when I select resume or close the lid, Lucid goes through the suspend cycle, and for approximately half a second it actually seems to go into suspend, then the screen comes back on, black, but definitely on, and absolutely no response to any keyboard input - have to hard-shutdown by holding down the power button. I've read that the problem is with the Ubuntu kernel, and that installing/compiling 2.6.33 fixes the issue, but causes other ones.
View 4 Replies
View Related
Jun 6, 2010
When I try either one I just get the lock screen where I have to enter my password to return to my session, but the computer never suspends or hibernates.
I've installed nvidia dkms support.
View 3 Replies
View Related
Sep 7, 2010
The other day somebody sat next to me whom I don't feel like entering in my password around, and I wanted to take my computer elsewhere. If I put my computer in my backpack while it's running, my computer will get hot, and the batteries will drain. So I'd like to put my computer in hibernate, or suspend mode, but my computer was already locked, and I couldn't hibernate or suspend without logging in, but I didn't want to enter my password around this guy so I could hibernate or suspend, so I was stuck.
I know there are reasons to keep things the way they are, (like maybe a server environment, etc...) and maybe it should default the way it is now, but I'd like the option to add the ability to hibernate and/or suspend when logged out, at the log in screen and/or a locked screen, without having to use a password.
View 9 Replies
View Related
Oct 13, 2010
After upgrading to 10.10 on my asus netbook suspend and hibernate is missing, how can i fix this?
View 1 Replies
View Related
Jan 5, 2011
There are no more suspend and hibernate options. I don't know when they disappeared.Before that I installed "laptop-mode-tools", but when I found that those two options are lost, I deleted (sudo apt-get remove) it.
View 4 Replies
View Related
Feb 9, 2011
The OS is Lucid 64-bit . Before I begin I must say suspend/hibernate works fine with 3 other machines, so I'm trying to find out what's wrong with this one. I tried [URL].. and also I tried changing acpi-support. It currently is as this:
[code]....
View 9 Replies
View Related
Mar 11, 2011
Is it possible to disable hibernate, sleep and suspend in Ubuntu 10.10? I have found none of these to work properly on my PC.
View 3 Replies
View Related
Mar 31, 2011
Machine is a Dell Optiplex GX260, Pentium 4 with ATI Radeon RV200 QW [Radeon 7500]. I believe this is an AGP graphics card. I also believe that the graphics card is the root of my problem. In Karmic, I could get the computer to suspend. but it would not resume. The monitor would not initiate and it seemed as though the system froze. Only way out was a hard reboot. Hibernate worked for me without any problems, so it was no deal breaker. Now in Meerkat, Suspend behaves exactly as before. However, I can not get the system to go into hibernation.
The monitor goes down, but the system seems to freeze and never go down. I have tried editing the options in the acpi-support file to no avail. I have tried disabling compiz (which works amazingly well with this card), to no avail. I am using the open-source drivers and I have not tried the closed-source drivers in this system. I tried the closed-source drivers in Karmic and they made no difference. I may try un-installing the ATI card and fall back on the on-board Intel chipset to see if that solves the problem. Only then, I will loose 3d effects, etc.
View 9 Replies
View Related
Jul 9, 2011
I recently installed Ubuntu 11.04 on a HP Pavillion Elite HPE-515sc. Product information is here: [URL]
After I installed I could shut down the computer. Then I tried hibernating and it hanged. I tried also suspending, it hanged as well. After that, I could not shut down computer with software, I have to use the power off button.
how to fix these problems (shutting down, hibernating and suspending)?
View 1 Replies
View Related
Apr 29, 2011
I have already installed gnome-power-manager.
There should be the suspend and hibernate buttons in th System Menu, but there is only two options, Shut down and Log off.Also, in the Power Manager Preferences window, it has no option for suspend and hibernate.
How to add suspend and hibernate options?
View 7 Replies
View Related
Feb 16, 2011
Is there an "official" way to add suspend and hibernate functionality to the KDE logout/shutdown menu in Squeeze? What packages do I need?
ps. My computer is not a laptop - it's a normal desktop machine
View 1 Replies
View Related
Dec 18, 2009
I have a web server running on my laptop(in fact , it's a netbook). But I found it always hibernate automatically in a certain time .(In fact , I don't know what's the differences between hibernate or suspend. So I call this hibernate instead.) I am sure I have disabled the hibernate function in Power-Management from the System menu. But it still hibernates as usual.So could someone tell me how to disable it ( suspend,hibernate whatever )?
View 6 Replies
View Related
Jun 23, 2010
I'm using the version 13 of Slackware. I can't suspend or hibernate my OS. I need something named HAL.
Searched a bit on the net but couldn't really figure something out.
View 5 Replies
View Related
May 3, 2010
The old way of doing this in gconf-editor (gnome power settings) is now invalid. Here is the new way of doing this! First install devicekit-power:
#aptitude install devicekit-power EDIT (aptitude install upower) installed by default on Lucid
Then edit the power policy: #sudo gedit /usr/share/polkit-1/actions/org.freedesktop.upower.policy
Under the following headings perform the following changes:
<description>Suspend the system</description>
Change the following entries:
Quote:
<allow_inactive>no</allow_inactive>
<allow_active>yes</allow_active>
[Code]...
View 1 Replies
View Related
