Ubuntu :: 10.04: Latest Upgrade Fails To Boot
Jul 30, 2010
It used to be, that with grub (not grub2?), I could restore the boot partition by the following:
# grub
grub> find /grub/grub.cfg
hd0,10
grub> root (hd0,10)
grub> setup (hd0,10)
Now this no longer works with whatever grub 10.04 uses, I suspect it is grub2? How do I restore grub to the specific partition I need and NOT to MBR? I have a different boot loader and this boot loader is directed to Ubuntu's boot partition.... Since I cannot boot directly to Ubuntu's boot partition I am perhaps left with only LiveCD to do the recovery, right?
View 5 Replies
ADVERTISEMENT
May 1, 2010
Installed v9 a couple of weeks back and have been causally mucking about with it since. I managed to get XP and ubuntu running as a dual boot system (which was an achievement ).
Anyway, i've upgraded to 10.04 - and already loving it. However... my XP o/s no longer boots. It use to prior to the upgrade. Now, when the XP o/s is selected from GRUB2, I just get a series of bleeps and a flashing _.
Now, I am a complete novice. I actually have no idea where to even begin trouble shooting GRUB2 (and i'm assuming its a problem with GRUB).
View 6 Replies
View Related
Jun 10, 2010
Dual boot Windows XP SP3 & Ubuntu 9.10 on a single hdd, w/2 partitions. Booted to Ubuntu and upgraded online. XP boots fine, but Ubuntu, not so much; a msg about /dev not found, followed by a shell login prompt. I suspect a grub problem, but haven't been able to find a definitive answer. Since I can at least boot XP, I do not want to do anything that would screw that up and leave me with no bootable OS. I did the "upgrade" shortly after 10.04 was released. Is there a way to reliably fix this w/o possibly screwing up my ability to boot XP, the only OS I can boot? I have no Ubuntu 10.04 disk, as I used their upgrade online option.
View 1 Replies
View Related
Aug 1, 2011
I just upgraded to ubuntu 11.04 but now all the kernels fail to boot. The resolution of grub changed and the older kernels are put into a 'previous kernels' folder. The most recent kernel halts at the message '* Stopping userspace bootsplash [ OK ]' and the previous kernels fail with the message 'Unlink after no-irq. Controller is probably using the wrong IRQ',
or show the background of the login screen with just a white box.
I think the cause is that I have an ATI graphics card (HD Radeon 3650), because on my 2 other computers ubuntu upgrades fine and they have NVIDEA graphics cards.
As a last resort I tried installing different distro's like Linux Mint but it also gived me the 'unlink after no-irq' message.
View 1 Replies
View Related
May 20, 2011
My box has a raid5 array (mdadm) with everything in it (/boot and /) but swap that is actually spread across the 4 drives. I had ubuntu 10.10 installed (amd64) with grub1, when I upgraded to natty (11.04) it automatically installed grub2. Well boot fails, it always goes to grub rescue no matter what happens. I've installed and reinstalled grub2, and boot always fails with:
"error: file not found".
In grub rescue I can see that md0 is actually available, an "ls" to (md0)/boot succeeds but the strange thing is that an "ls" to (md0)/boot/grub prints nonsense, as does an "ls" to (md0)/boot/usr/lib/grub/i386-pc/. When I try to load the required modules for boot (linux raid etc) in grub I also always get a "file not found error" (I fsck'd md0, which says everything's fine). I have installed the latest version of grub2 and executed grub-install in all four drives.
View 6 Replies
View Related
May 2, 2009
I have just finished updating my older box from 8.10 to 9.04 and installing a bunch of programs. I had shut it down several times between sessions but when I unplugged it and moved it, it fails. It goes fine through the BIOS and GRUB (I think) but then when there is a screen of text it flashes to black several times and then displays a screen that looks like static with "Ubuntu" barely visible in several places.
View 8 Replies
View Related
Jul 21, 2010
I was running openSUSE 11.2 on a Dell Studio with a mirrored disk. The upgrade to 11.3 went well it seemed until it got to the point of installing the new bootloader. Then it couldn't mount /boot. Otherwise it seemed to go OK though.It completed and rebooted. I see a very brief flash of the word GRUB on the reboot, but then the screen blanks and I get the BIOS messages again.How can I now install GRUB so that I can boot. I had a similar issue with 11.2 in the past, and was able to repair GRUB using 11.2's DVD's "Repair Installation" which had tools to reinstall GRUB.11.3's DVD is missing this option.I'd prefer not to do a fresh install as then I will have a lot of OS setup to repeat (Samba, Apache, Trac, etc.....)
View 9 Replies
View Related
Jan 24, 2010
When I ran the distribution upgrade from 9.04 in update manager, my screen went blank on reboot and will not recover. Every time I reboot, screen goes blank. I cannot press CTRL-ALT F1 - F6 to gain access to text shells.
I tested booting from the 9.04 live CD and it works fine. So I downloaded the 9.10 live cd on another computer and booted it on the disabled system. Same exact problem on the live CD that I had upon installation: on boot screen goes black and cannot access text shells.
What can I do next to get out of this short of going back to 9.04, which has problems that I do not want to live with?
View 1 Replies
View Related
May 12, 2010
I run "aptitude update;aptitude full-upgrade" today, then I updated /etc/default/grub changing only the default boot line number, and I dully run update-grub, with no error messages. Now Kubuntu will not boot. The new kernel 2.6.32-22 is in the boot menu. When I turn the computer on, a blinking cursor appears on top line, column 8, and after a few seconds this cursor disappears and the screen is blank - my monitor indicates no video signal.
The failsafe 2.6.32-22 grub line does not boot either. I tried pressing Ctrl-Alt-F1, Ctrl-Alt-F2 etc. up to Ctrl-Alt-F10 to get to a text mode login prompt, but the screen remains blank and my monitor indicates no video signal. The workaround is to boot to kernel 2.6.32-21. The machine is Athlon XP, 2GB RAM, ATI Radeon 9600
View 1 Replies
View Related
Dec 4, 2010
I have a 1.0 ghz G4 eMac running Tiger. Using Ubuntu 10.04's Live-CD I installed 10.04 on a 8-gig USB flash drive and it worked very well despite spending nearly five hours to download its files via DSL and a pokey USB 1.1 port. The flash drive's 10.04 installation worked just fine on my eMac and 900mhz G3 iBook except for Airport wireless non-connecting issues.(I like Ubuntu 10.04 because unlike Mint for PPC, you're not hassled or barred from accessing your Mac HD and its files.) THEN, to resolve my wireless issues, I decided to upgrade to 10.10 which took nearly 12 hours, and it seemed to've installed well until I tried booting the flash drive and it doesn't work. I get the Ubuntu icon in the Startup Disk screen but it keeps returning to it even after I select Ubuntu. The error screen I get reads code...
View 5 Replies
View Related
Sep 1, 2010
Debian testing: Kernel: Linux 2.6.32-5-amd64I can now only boot into safemode because I cannot get these 4 packages to upgrade:
udev
media-player-info
xserver-xorg-core
[code]....
View 6 Replies
View Related
May 22, 2010
I got tired of not being able to run any 3D apps on my integrated Intel and went out and came home with a ATi Radeon HD 4650. Skip the bit about how I could have gotten an nVidia (they didn't have any HTPC compatible low-profile nVidias on shelf).
Actually the card works very well, it runs all the 3D apps I've thrown at it so far (and quite a bit faster too).
My problem is with video playback: it is jerky. The framerate stalls and then speeds up and is out of sync. When not out of sync, there is tearing. Yes I have tried turning Compiz off, didn't do anything. Weird thing is the CPU utilization is really low, so everything should be working.
I figured I would update the video drivers to the latest available on ATi website (following the instructions here) but I've ran into trouble with the installer:
Code:
How do I proceed from here? If you've got a fix for the video with the drivers in the repositories that is cool also. I don't necessarily need the latest drivers.
View 9 Replies
View Related
Feb 20, 2010
found this in my boot log nvidia.ko for kernel 2.6.31.12-174.2.22.fc12.x86_64 was not found. and the driver is disabled and X is not working correctly. I tried removing the driver "yum remove kmod-nvidia "
then re-installing and rebooting. same issue I went to the fusion site and followed there install guide again same issue. made sure the free driver is blacklisted in grub.conf kernel lines
View 2 Replies
View Related
Sep 23, 2010
sudo yum update
Loaded plugins: fastestmirror, presto, refresh-packagekit
Loading mirror speeds from cached hostfile
* fedora: ftp.linux.org.tr
* livna: rpm.livna.org
[code].....
View 4 Replies
View Related
Mar 25, 2009
I just updated my Fedora 10 installation with the latest NetworkManager (NetworkManager-0.7.0.99-4.git20090324.fc10.i386) and now my NetworkManager fails to start. The output in the /var/log/messages is
[code]...
View 3 Replies
View Related
Jul 18, 2010
I'm testing out Ubuntu 10.4 LTS, I'd like to upgrade my evolution 2.28 to the latest 2.8
View 1 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
May 8, 2011
I have ubuntu 9.10 how to make it or upgrade it to latest 11.04? I don't want to do new installation?
View 1 Replies
View Related
May 25, 2011
I understand that I can upgrade to the next release using ubuntu's upgrade wizard. But it's been a while and there's 11.04 now. What are some recommendations?
View 3 Replies
View Related
Mar 17, 2010
I just did the latest upgrade in 9.10 via the update manager and it required a reboot. When I rebooted Ubuntu failed to load. In recovery mode it fails saying that it can't find my root device and has some suggestions about what might be wrong. I looked at the file it listed in /proc/something and the devices available by uuid in /dev/ and what's listed in /proc/something isn't in dev. I haven't made any changes yet for fear of causing worse damage. The shell it bumps to is ASH and it doesn't look to have much editor support to make changes to the proc file(ECHO > ?). Is there a safer way to get my system back online?
I'm running 9.10 AMD64 on a Dell Inspiron laptop with a dual boot to Windows 7 (For browser testing web apps/sites)
View 9 Replies
View Related
Apr 26, 2010
We have been using Ubuntu 8.04 with ltsp the server is Intel P4 with 2 GB Ram and the 8 client consist of either Atom or old P3 and P4. Now we want to increase the clients and want to upgrade to latest ubuntu 10.04.
I heard AMD does excellent job with LTSP but is it possible to have intel clients and AMD as a server. If not then which the best intel server I can have other than xenon (Bcoz of the price factor i dont want to go for that)
View 1 Replies
View Related
Feb 24, 2011
I'm trying to upgrade netatalk to the latest version because my Time Machine gets corrupted when the volume reaches its max capacity. How do I do it? I uninstalled netatalk, downloaded the latest package, made configure, make, make install (without any errors, just some warnings), but netatalk doesn't seem to run. I can't connect to the shares. If I install netatalk 2.1.2 via synaptic everything starts to work again. How to upgrade netatalk to the latest version on ubuntu 10.10?
View 1 Replies
View Related
May 20, 2011
I want to upgrade my current evolution (2.30.3) with the latest stable release (2.32.2). How can I do it? Is there any PPA for that?
I am using Maverick.
View 5 Replies
View Related
May 23, 2011
How do I Upgrade to or Install the latest version 1.1.9 of VLC Player in LUCID?
View 2 Replies
View Related
Apr 2, 2009
I'm so tired on how i can change the resolution of my suse 7.3 because i change my monitor into a wide flat screen.
but now i decided to upgrade my OS in to the latest version of suse but i don't have any idea on how to start because i have alot of files and important application in 7.3 i worried if i upgrade my OS it will erase my files and application. does anyone know to do it. i want to upgrade but i dont want to loose my files and application.
View 2 Replies
View Related
Jul 23, 2010
how i can upgrade to the latest MySQL? I have not set up any DB so it should not be any problem in migrating. but i just don't know the basic commands to do this
View 1 Replies
View Related
Nov 18, 2010
how i can upgrade to the latest version of yum on a Centos 5 box?
View 4 Replies
View Related
Feb 10, 2010
I am getting a black screen on the latest kernel upgrade 2.6.31-20. My computer completely boots up, but goes black after a minute or two. For now, I am booting up with the previous kernel.
View 3 Replies
View Related
Jun 5, 2011
Last week I could burn dvd's and cd's and had no problem. I did the latest kernal upgrade for Ubuntu 10.04 yesterday and today I cannot get K3B or Brasero to recognize any type of medium weather blank or filled. Looked on the forum and there appears a bug in the kernal. Is there a workaround? If so how do I use it.
View 6 Replies
View Related
Jul 13, 2011
my sound was working fine until i've updated the kernel this morning through update manager. Now my sound doesn't not work, despite the sound card appears to be normal on sound preferences.
View 1 Replies
View Related
