Software :: Use A Hard Drive On Another Motherboard??
Jan 17, 2011
I bought a new motherboard and put this hard drive and 2 others on it. This hard drive has Kubuntu 8.04, one other has windows 7, and the 3rd one has Mandriva 2010. I re installed Mandriva 2010 so it would recognize the other 2 hard drives (10 hours later). And even though GRUB sees all 3 hard drive I cannot boot to Kubuntu 8.04. I had to put Mandriva on the one because it has a complete GRUB bootloader whereas Kubuntu does Not So is there a way to get this hard drive to work on my new motherboard?
I had to put together another tower with the old mobo to get to where I am now.
View 14 Replies
ADVERTISEMENT
Jul 28, 2009
I have a seagate SATA hard drive that was running a mythtv distro. It had 3 partitions, EXT3, swap, and XFS. I started having I/O errors on boot and saw error messages on both the EXT3 and the XFS partitions. I also heard some clunking sounds on the drive when it was reading, so I thought hell, the drive is dead.
I have since replaced the drive and everything is back up and running on the replacement drive. I thought hell, the seagate drive is toast, but I just want to verify it with some sort of tool. I have the hard drive in a Vantec NexStar external hard drive case (SATA->USB) and found there was a tool called badblocks. Ran badblocks on it, which ran for 24ish hours and found no bad blocks. I also didn't notice any clunking sounds while it was running.
I ran
Code:
badblocks -n -v /dev/sdb
Is badblocks a proper test to run on external hard drives or was I just wasting my time? Is there any way that I can really test it without removing it and connecting it with SATA to the motherboard?
View 7 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Jan 19, 2016
I am currently thinking about moving my debian install onto another more powerful motherboard/processor/ram amount. My question is how difficult will the move be?
I have done some reading on cloning and or moving. It seems like moving is the best bet,
[URL]
It looks like its as simple as moving the harddrive. But what about multiple hardrives with LVM set up? I also realize I will probably have to find the network drivers for the new motherboard. There's probably other drivers that will need to be installed as well. What would need to be configured in terms of VM set up?
The former set up is,
Asus MB with i3 and 8GB of ram 3 hard drives
VLM set up
samba server for the local windows machines
Virtual Box with one VM - Win 7
SNTP server set up to serve the home network.
SSH with keys
VirtualBox PHP
Transmission for torrents
Plex and Subsonic (for remote streaming), other assorted packages
New Set up is,
Intel mobo with i5 and 16 GB of ram
-I would literally be moving the hard drives into this computer
View 0 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Aug 2, 2010
I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
View 9 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
May 28, 2011
- I've recently been donated a second emac by a friend that needs a new hdd. I want to add as much speed as possible, but don't know much about hdd transfer speeds
1)sub 100 SSD vs 7200 16mb 3.5'' platter drive ? I can't seem to find much information here. As far as I can tell, the standard hard drive would be faster unless I'm prepared to spend a couple of hundred on a top of the range SSD - is this correct?
2) will a sata/ide converter slow the transfer rates? is it worth spending the extra 50% to get an ide drive with the same specs as a SATA drive, or just use the converter?
3) Thoughts on connecting the drive via firewire - how much slower would this be than connecting the drive via the ide port on the motherboard? I am only concidering this as I don't use the firewire ports for anything else, and getting to the hard drive is a total pain, not to mention the inherrant risk of electric shock on these machines.
View 3 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Jan 17, 2011
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
View 7 Replies
View Related
Sep 11, 2010
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies
View Related
May 22, 2011
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies
View Related
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies
View Related
Mar 23, 2010
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
View 1 Replies
View Related
Aug 13, 2010
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies
View Related
May 30, 2011
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies
View Related
Feb 12, 2011
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
View 6 Replies
View Related
Mar 20, 2010
I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
View 8 Replies
View Related
Jan 23, 2010
I wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies
View Related
Aug 26, 2010
I just booted one of my computers from a usb drive I had installed Ubuntu 10.04 LTS to, and when I booted it up on that computer, it worked fine. Then, when I powered down the computer and booted it back up to the main hard drive, it booted to the same that my flash drive was running, but my flash drive was not plugged in!! How is this possible? Did it copy itself over my other operating system? There is no trace of it. By the way, that, too, was ubuntu 10.04.
View 2 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Jan 20, 2010
I have ubuntu server acting as a router installed on a 60 gig drive, i'd like to use that drive in another machine and replace it with a 5 gig drive. how can i transfer from the 60 gig drive to the 5 gig drive?
View 9 Replies
View Related
Jun 23, 2010
I am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
View 2 Replies
View Related
Oct 7, 2010
I want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
View 2 Replies
View Related
Feb 21, 2010
i know that my question is not according to the rule of Hardware.Before posting I thought a lot.But i found this forum helpful in many ways. So my question is should I consider of installing a cooler(fan) for Hard drive.
View 9 Replies
View Related
Mar 6, 2010
I have a Toshiba laptop with BIOS that will not recognize USB as a boot medium (I have purchased two USB 'thumb' drives with Distro's that do boot but the BIOS see them as HDD devices!)I did manage to install and boot a distro from the USB HD but ended up with the USB drive having to be connected' to select any of the OS partions, to boot anything.I do realize that somehow, when installing the new distro on the USB drive, I changed the GRUB configuration to be on the USB drive which obviously I did not want, so can
View 5 Replies
View Related
Mar 29, 2011
I have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
View 11 Replies
View Related
