Looking for skins for xine
Using Debian Lenny
xine version:
This is xine (X11 gui) - a free video player v0.99.6cvs. (c) 2000-2007 The xine Team.
I would like to try a different skin for xine. Is there a package I can download? I would like something besides black. It gets hard to see things at times.
I',ve recently installed suse 11.2 on my vaio vgn-nr31e. one of the(several...)things that i'm not been able to do,is to install knew skins on xmms player,that i've allready installed. can't copy compressed downloaded skins to usr/share/xmms/skins...and by the konsole i'm getting error when trying to ./configure,after downloading and decompressing.
View 4 Replies View Relatedfc-9-live-usb i installed xine-lib then xine-ui using:
Code:
./configure --prefix=/usr && make && sudo make install
but it didnt create a xine executable
[code]...
I have just installed Slackware 13.1 32bit. My hardware is a P-4 3Ghz with a gig of ram. Intel on board graphic and sound.
This is the best implementation of Kde I have used so far. Slack 13.1 is amazing. The install went very well and everything we configured properly.
My problem is when I start Kde or try to shut dowm or logout I get the same error for knotify: Unable to use the Xine Multimedia Backend:Could not find plugin 'Xine' for application 'Knotify'
I get this same error with the application name at the end of it. If I open amarok I get the same error message with amarok at the end. If I try to click a misic file in dolphin same error message.
When I try to shut down or log out from menu I get the xine error and nothing happens. The only way I can log out is Ctrl+Alt+Backspace to get to the KDM log in screen and then I am able to shut down from the menu.
I have been looking on the forum and using google but have found nothing useful.
The error pops up when I try to play a cd or music on the hard drive.
No matter which skin I choose for audacious, it looks mostly purple. Even *.wsz skins that I have downloaded from winamp. Here's the skin the way it should look:
BenuAmp.png (14.53 KiB) Viewed 419 times
-xmms does support the "Expensive Hi Fi", wich as i told i've allreday installed and works.
-Xmms doesn't support the "Analog Vu Meter Plugin" for that skin, wich i don't know were to download(i only am able to see the images of it at [url]?content=49220"-3rd picture bellow, left side-the "Sony Vu's").
-The http page refers the skins and the plugin to KDE graphic environment, i'm using GNOME, and i'm not shure that this may make any difference.
-After the exausting net reading, i think...?, that Audacious does support the "Expensive Hi Fi" and the "Analog Vu Meter Plugin".
As i told, i don't give up that easy, and Audacious seems to be some upgrade or evolution of Xmms, and it as that "retro classic" look that i like and can be personalized like Xmms.
So, i've allready installed Audacios, with all the necessary codecs and libraries, and it's working so well as Xmms worked.
But know i'm having another problem :
-To personalize skins in Audacious(...more exausting net reading...), the operation should be so easy as:
-For any skin that we want(*.wal;*.wsz or compressed one's...), download it and copy it into:/users/share/audacious/Skins, wich i've allready tried(such as skins pasted into .xmms), but i get this error message:"Permission denied"!
Does anyone know how to change the skins in Audacious 2.4?? I for the life of me can't seem to work it out.
View 1 Replies View RelatedI've been using Xine for a while now, and all of the sudden when I try to play an audio file I get this message saying ( The stream " There is no Mrl" uses an unsupported codec:
codec: MPEG 1/2 (0x0) Star Playback Anyway?)
Anyway it will not play any video or audio files. Has anyone seen this type of message before?
It seems that i have to install the win32 codec package in order to play .mov files with xine !! how can i install these codecs ?
View 11 Replies View RelatedI a trying to get DVD playback working on 11.2 64 KDE 3.5I did the one click install.Kaffeine is now broken)I launch xine from the command line and get this when I select DVDYou can see the DVD STRAWBERRY_MARSHMALLOW_VOL1 udf 4.3 GB 0.0 KB in under "my computer" in the image and it shows up under /mediaI have disk and cdrom enabled under my user account. What else do I have to configure so xine can access the DVD drive?
View 4 Replies View RelatedI want to use xine as the backend for totem and I am advised to run totem-backend:
[root@june tim]# totem-backend -b xine
Command not found.
[root@june tim]#
how to install totem-backend
I am trying to get my DVD to view on my Dell D610 laptop running Fedora 14 LXDE. Error messages:
Xine engine log console:
lirc: cannot initialise - disabling remote control
lirc: maybe lircd isn't running or you can't connect to the socket?
[code]....
Using Debian Lenny. I downloaded a video and am trying to play it in xine.
It is an ASF file and I get the following error:
codec error:
I also got the same error using Mplayer, and ffplay It starts playing the video and I get sound, but then it stops.
As the title says, I don't see a 'VDPAU' option for video driver, in XINE config? I have installed Nvidia proprietary drivers (260.something) and XINE user level is set to 'Master of the known universe'...
View 5 Replies View RelatedI am not able to install xine using yum. Please let me know what needs to be done to resolve this issue
[root@star ~]# yum -y install xine
Loading "installonlyn" plugin
Setting up Install Process
[code]....
I have to make any changes to /etc/yum.repos.d/CentOS-Base.repo file
xine freezes completely and totem freezes when I resize video. Sounds like a library problem.
View 8 Replies View RelatedI am having some trouble with xine, and because of this I cannot get any media player to work. When I try to play mp3's in Amarok, nothing happens and the song does not play. When I try to open xine, it opens a window that says
The stream 'There is no MRL' uses an unsupported codec:
Video Codec: MPEG 1/2 (0x0)
Start playback anyway?
[code]....
after installing xine, i tried to install the rpm plugin in order to play mp3 files but i got the following problem:
# yum install xine-lib-extras-freeworld
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
[code]....
I have a couple of audio problems that are bugging me.
The first one:
I have two backends for phonon: Xine and Gstreamer. :
Xine has the following devices listed:
And GStreamer has the following:
Almost everything works good with Gstreamer except that I cannot skip through song length in amarok (cannot do Fast forward or rewind). I have some long songs (non-stop remixes) and I want to play at different positions. If I select Xine backend, skipping works, but I get a new problem. The PCM slider (which I use as the main slider to work for both Master and LFE (subwoofer) I have) won't work. It won't respond to PCM slider. and The master channel works only if I lower the volume all the way to a little value (around 5%-10%). From withing amarok. If I don't use PCM slider, I cannot lower or raise the volume with one slider. I have to do it manually for both LFE and Master. (See the working sliders below):
Second problem.
My kmix will show these sliders everytime my computer boots.and everytime it works. Working sliders: But each time I "logout" and log back in, I get these sliders instead. I tried creating a new user, but the problem persists. And the problem is that I do not get any sound at all, regardless of sliding every single sliders all the way up.
not_working sliders (which I get ONLY but everytime I logout and log in):
Here is my alsa-info: [URL]
In Hardy Heron, after installing xine and the usual stuff, and setting xine as the default dvd player in /etc/gnome/defaults.list in the usual way, and also linking /dev/dvd to /dev/dvd2, when I pop in a commercial dvd for autoplay, or select xine from the context menu to play it, it starts to play fine, but also produces the "source can't be read" messagebox, which goes away after being OK-clicked 10 (exactly!!) times.Launching xine directly from the application menu does not produce this problem.
View 1 Replies View RelatedHow put totem -xine in lucid
I try [url] but I get error. Any other way?
I'm trying to watch a dvd on Lucid, but not vlc or xine can open it.I have the libdvdnav, libdvdcss and libdvdcss libraries from the medibuntu repositories installed.Here is the log I gget from vlc when I try to play the dvd. It seems as if cannot decode the format.
Code:
libdvdnav: Using dvdnav version 4.1.3
libdvdread: Using libdvdcss version 1.2.10 for DVD access
[code]....
I recently updated all my desktop/laptop and MythTV boxes to 10.10 and now Xine freezes if I hit any key or try to exit. No error message or anything, just freezes. It happens on ALL my machines. I can watch the movie fine as long as I don't hit any keys
sample launch:
xine --no-splash -V Xv dvd://mnt/mserv/DVD/ZATOICHI.iso
Everything worked fine in 10.04. I would love to eventually switch to MPlayer, VLC, or something else but I haven't found one that reliable supports menus, chapters, multiple audio tracks, 5.1 surround output, etc. from an ISO file. Why has no one caught up to Xine?
emachines W3115; CentOs 5.3 multiboot, KDE. Sound and video in general has worked fine on this machine. I have played MIDI files, converted them to WAV, and played them with one or more players, including noatun. When I install an audio CD, it brings up a window KDE Daemon which asks if I wish to:
Open in New window Extract and Encode Audio Tracks Play Do nothing. This is standard these days. The problem is, if I click on Play, it brings up a player called "player" which starts running smoothly, but no sound comes out of the speakers. I have no idea what 'player' is. There is no menu on it anywhere. DVD videos work fine, at least the Bonanza one I tried. If I open the CD rom, and right click a .wav file, either 'audio player' or 'mplayer' will play the file. Other choices don't.
*****If I go to the main menu ==> Multimedia and open Xine, then I can click on the CD button on Xine control and it will happily play the entire CD. *****
There are two ways to go on this. Unless someone has an idea what 'player' might be, and some idea how to fix it, another solution which I find suitable is to open XINE, when I click on that window choice stated above when CD is installed, which means I can select ALWAYS.I went to Configure on that mount window, and nothing seemed like it would actually let me configure anything at all. I figurer there is a script file which selects the command when PLAY is selected.
The problem is with a zillion Googles, I get all kinds of player information; all kinds of Centos information; etc., but nothing useful that has anything to do with my problem. how to change PLAY when it asks my choice on an installed CD, so it will run Xine? Note Centos forums does not allow a search on less then 3 characters, which makes it difficult to search for CD information.
how to install xine player in RHEL 5.4
View 1 Replies View RelatedMy DVD player is on /dev/hdc but when I put 'xine /dev/hdc' on the command line I get an error saying 'There is no demuxer plugin available to handle /dev/hdc'. If I use the mount point /media/DVD instead of /dev/hdc it works fine. I am trying to get DVDs to play automatically but I can't see how to get xine to look for /media/DVD instead of /dev/hdc. I have tried changing the location on the Settings -> Media tab, and the line which says 'directory a media in dvd device will be mounted' in ~/.xine/config but neither worked.
View 3 Replies View RelatedI recorded a video from my DVB-T device Xine (and other Xine based players like Kaffeine) just play video and there is no audio (While other video formats has no problem! I tried with xine-ui , gxine and Kaffeine). But that video has no problem in mplayer or VLC! this is gxine report on video meta info:
Code:
Audio Codec: AAC 2.0 (libfaad)
Audio Format: 6 Channels, 32 bit, 44.1kHz, 54000 bps
Video Codec: h.264/AVC (ffmpeg)
Video Format: 720x576, 25.0 fps, 1.36:1, 0 bps
System layer: MPEG_TS
I'm using Ubuntu 10.04 (Lucid Lynx)
I have been using Lenny for about a year now, but for some reason Xine has suddenly stopped playing mkv files. It plays everything else including flash. I only started using xine because the mkv files for some reason suffer from a lag between the video and audio in mplayer. I tried installing banshee and vlc but neither of them show video. So I was left with only Xine and it worked perfectly then it suddenly stops playing mkv. Is there something I need to install or remove, reconfigure? Do I just delete the Xine config folder in my home-folder? Lenny being what it is I can only install what is on the out-dated Lenny repos trying anything else like the unstable releases simply wants to uninstall my entire system.
My machine specs are:
Acer Aspire 8930
Intel Centrino 2
NVidia geforce 9600m GS 512mb
RAM 4GB
I have the proprietary nVidia graphics drivers installed. So it is powerful enough.
I have a USB dongle to watch tv (Asus U3100 mini) that supports DVB-T. I live in portugal and DVB-T here uses MPEG4 h246 codec. Until now the only app I can have image and sound is VLC. However with VLC I can't schedule recordings and other features that totem + gnome-dvb-daemon has (or mythtv, also no sound with it). I have all related gstreamer plugins, ffmpeg, x264 libs and I've tried to install everything related with mpeg and aac. i don't know what I'm missing here, Video with totem is also a little jerky compared to VLC and xine.
View 3 Replies View RelatedI am running openSUSE 11.2 KDE desktop. (Also use LXDE as an alternative desktop because I am running on a P3 with 512 of RAM.) I originally had followed the guidance at Multi-media and Restricted Format Installation Guide - openSUSE Forums and had Amarok and Xine both working satisfactorily for several weeks. Now, for some reason, both apps begin to load and then crash.
View 6 Replies View Related
