I am not able to install xine using yum. Please let me know what needs to be done to resolve this issue
[root@star ~]# yum -y install xine
Loading "installonlyn" plugin
Setting up Install Process
[code]....
I have to make any changes to /etc/yum.repos.d/CentOS-Base.repo file
fc-9-live-usb i installed xine-lib then xine-ui using:
Code:
./configure --prefix=/usr && make && sudo make install
but it didnt create a xine executable
[code]...
I have just installed Slackware 13.1 32bit. My hardware is a P-4 3Ghz with a gig of ram. Intel on board graphic and sound.
This is the best implementation of Kde I have used so far. Slack 13.1 is amazing. The install went very well and everything we configured properly.
My problem is when I start Kde or try to shut dowm or logout I get the same error for knotify: Unable to use the Xine Multimedia Backend:Could not find plugin 'Xine' for application 'Knotify'
I get this same error with the application name at the end of it. If I open amarok I get the same error message with amarok at the end. If I try to click a misic file in dolphin same error message.
When I try to shut down or log out from menu I get the xine error and nothing happens. The only way I can log out is Ctrl+Alt+Backspace to get to the KDM log in screen and then I am able to shut down from the menu.
I have been looking on the forum and using google but have found nothing useful.
The error pops up when I try to play a cd or music on the hard drive.
I am trying to install Centos 5.6 on a motherboard with a built in Marvel 88SE61xx drive controller.NO drive arrays are configured using the Marvel BIOS configuration utility.During the install CENTOS displays loading MARVEL_PATA driver and it waits and waits and waits.Looking on one of the system message screens I get the following types of messages:qc timeoutfailed to identifyI/O errorLink is slow to respondSRST failed errno=16ata4: reset failed - giving upAny ideas as to how to get CENTOS to recognize the drives connected to the motherboard Marvell controller on a NON-RAID configuration?
View 1 Replies View Relatedemachines W3115; CentOs 5.3 multiboot, KDE. Sound and video in general has worked fine on this machine. I have played MIDI files, converted them to WAV, and played them with one or more players, including noatun. When I install an audio CD, it brings up a window KDE Daemon which asks if I wish to:
Open in New window Extract and Encode Audio Tracks Play Do nothing. This is standard these days. The problem is, if I click on Play, it brings up a player called "player" which starts running smoothly, but no sound comes out of the speakers. I have no idea what 'player' is. There is no menu on it anywhere. DVD videos work fine, at least the Bonanza one I tried. If I open the CD rom, and right click a .wav file, either 'audio player' or 'mplayer' will play the file. Other choices don't.
*****If I go to the main menu ==> Multimedia and open Xine, then I can click on the CD button on Xine control and it will happily play the entire CD. *****
There are two ways to go on this. Unless someone has an idea what 'player' might be, and some idea how to fix it, another solution which I find suitable is to open XINE, when I click on that window choice stated above when CD is installed, which means I can select ALWAYS.I went to Configure on that mount window, and nothing seemed like it would actually let me configure anything at all. I figurer there is a script file which selects the command when PLAY is selected.
The problem is with a zillion Googles, I get all kinds of player information; all kinds of Centos information; etc., but nothing useful that has anything to do with my problem. how to change PLAY when it asks my choice on an installed CD, so it will run Xine? Note Centos forums does not allow a search on less then 3 characters, which makes it difficult to search for CD information.
I was trying several times to install Centos 5.4 32bit via DVD or netinstall method. Installations stops at setp where is formating disk and always at 12%. No error messages only can't format logical volume and please reboot server. Also deleted and create fresh RAID 1 array, but not helping.
View 7 Replies View RelatedWhen I try to update my system, I get the message: Error: Missing Dependency: xine-lib(plugin-abi)(x86-32) = 1.25 is needed by package xine-lib-extras-freeworld-1.1.16.2-3.fc10.i386 (installed) after a list of packages which are set to be updated.
View 1 Replies View RelatedI'm running a fresh install on an intel i7 system on an asus p6t deluxe v2 motherboard with the onboard NIC (Marvell Technology pci-e). I know the NIC is working as when I boot into the onboard OS that Asus provides (Asus Express Gate SSD)I have a working net connection.Booting up CentOS hangs at determining IP information for eth0 and eventually fails with the following error:PING xxx.170.30.1 from xxx.170.31.231 eth0: 56(84) bytes of data---xxx.170.30.1 ping statistics ---4 packets transmitted, o received, +3 errors, 100% packet loss, time 2999ms, pipe 3 failed.
RTNETLINK answers: file exists.
RTNETLINK answers: file exists.
RTNETLINK answers: file exists.
[code]....
I'm trying to install a dual booting machine with OpenSUSE v11.1 32bit and CentOS v5.2 64bit. I installed OpenSUSE first and allowed it to install and configure grub in the MBR and after that I wanted to proceed with CentOS v5.2. The installation went fine with two notable exceptions:- when I had to configure grub installation parameters, CentOS offered me only 2 solutions: either install it on the MBR of the first hard disk or not installing it at all. Other distributions are more flexible allowing you to install it in the boot sector of the root partition for example. Because I didn't want to ruin the existent grub onfiguration, I reluctantly accepted not to install it for CentOS assuming that I could manually configure the entry later in grub's menu.lst file.
- when I was presented with the options for software components installation, I've clicked on virtualization category/function because I intend to use the machine as a VMware host. There was no guidance on screen at that point and I blindly assumed that by choosing the virtualization function I would get necessary tools and drivers that will help me further on. It seems that this was a wrong move as you can see it below.
After completing the installation, I tried to search for a template or guiding on how the menu entry in menu.lst should look like but the grub directory was empty, not surprisingly because I've told CentOS earlier not to install it. Using the files in the /boot directory from the CentOS installation I tried to improvise a menu entry but it's not working. The boot stops with famous Error 13: Invalid or unsupported executable format. Using the file command to check what kind of files I'm trying to load as kernels I'm getting :
marte:~ # file /mnt/vmlinuz-2.6.18-92.el5xen
/mnt/vmlinuz-2.6.18-92.el5xen: gzip compressed data, from Unix, last modified: Tue Jun 10 19:20:51 2008, max compression
[code]....
I am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out (ERROR:Message not sent. Server replied: ). I apologize for not going directly to the qmailrocks forum, but they are currently closed down (due to lack of funds). I also am a newbie, so I apologize for the lack of needed information. If anyone has any ideas, please let me know what information you would need.
i want to change my server to a intel d510mo withoutchanging the installation.The old nstallation runs on a centos 5.4 asus amd board witha sata raid, sata-sil adapter in no raid modus.and that is the problem.i boot the centos on the intel board, and only the sata-sil module is loaded, so noata drive is found.How can i change this? udev? i disabled the scsi-hostadapter in modprobe.conf, but no
View 1 Replies View RelatedI am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
Is this caused by the different version numbers? Is lvm2-cluster going to be updated soon?
[root@localhost ~]# yum install lvm2-cluster
Loaded plugins: dellsysidplugin, fastestmirror
Loading mirror speeds from cached hostfile
[code].....
All our CentOS servers sync to a windows domain time server and we're migrating to a new CentOS time server. however in testing the setup with the clients I get the following
# ntpdate 10.10.31.211
16 Mar 09:20:46 ntpdate[2646]: no server suitable for synchronization found
checking to see if I can at least query...
# ntpdate -q 10.10.31.211
server 10.10.31.211, stratum 16, offset 17579.121921, delay 0.02591
16 Mar 09:08:07 ntpdate[2606]: no server suitable for synchronization found
so it queried the server and also failed.
I have tried every variation I can think of to get an 'at' to rm a file after a certain amount of time.
echo 'rm -f /var/www/media/images/tempProducts/XYZ.png' | at now + 2 minutes
In php:
$apCommand = "echo 'rm -f " . $sTempName . "' | at now + 2 minutes";
exec ($apCommand);
I have:
- pasted the command into the command line as root and it works fine so it seems to be rights related -- rm gets scheduled and the file gets deleted after 2 minutes
- tried every variation of sudo within the statement including making sure that apache is listed in sudoers
- chmod to 777
- chown to apache
The rm command does get scheduled into the 'at' queue but the rm never removes the file.
at -c (without adding sudo to the 'at' statement)
#!/bin/sh
# atrun uid=48 gid=48
# mail apache 0
umask 22
[Code]....
This is what I get when trying to upgrade PHP from 5.2.17 to 5.3.6.
[Code]...
I did, a few months ago, try to install OpenLDAP, but never got it working. What do I need to do to get PHP to upgrade?
I have a CentOS 5 64bit cloud server at 1and1. The current version of PHP on it is 5.2.17. I would like to install 5.3.6, which is available from the Atomic repository. I'm using yum for all this but when I try to install the 5.6.3 package, I get the following.
Total download size: 10 M
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
Package php-ldap needs php-common = 5.2.17-1.el5.art, this is not available.
Complete!
[root@s15 ~]# php -v
PHP Warning: Module 'ldap' already loaded in Unknown on line 0
PHP 5.2.17 (cli) (built: Jan 7 2011 10:39:29)
Copyright (c) 1997-2010 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2010 Zend Technologies
[root@s15 ~]#
I tried to install openwebmail via yum repository as explained in here: [url]
The problem is openwebmail has a dependency on perl-Compress-Zlib that conflicts with perl-IO-Compress that is needed by amavisd and clamav. The error message looks like that:
I have been using the same kickstart more or less since release 5.2 but it fails with 5.5. It looks like it is good all the way to the final stages. Does anyone know what has changed in anaconda for this release? I think the first boot process has changed as well.
View 5 Replies View RelatedI've just installed the NVIDIA 180 drivers on my Centos 5.2 installation via:
yum install nvidia-graphics
However, when I try and start X via startx it bombs out. The Xorg.0.log says:
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
[Code]....
what I need to do. I have a VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1).
Update to 5.3 went OK a few days ago.Today there is updated kernel packages available but it fails dependencies on ecryptfs-utils.
View 3 Replies View RelatedI have two CentOS 5 servers that I'm trying to transfer files between. They're on the same LAN switch, same subnet and everything. So far, everything I've attempted has failed, but scp still exits with a return code of 0. It only displays a line of *** and exits immediately. It's almost as if the file transfers instantly, but no file actually gets copied. Here is the verbose output from scp:
scp -v kickstart.tar ****@192.168.xxx.xxx:/home/****
Executing: program /usr/bin/ssh host 192.168.xxx.xxx, user ****, command scp -v -t /home/****
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
[code]....
Trying to install yum-installonlyn, yumex reports a dependency error because libgif.so.4 is needed. However, that library is in /usr/lib and I also have copied it to /lib - with no success. Could anybody tell me which piece of information I am failing to give yum?
View 4 Replies View RelatedI have installed ddclient for use with dyndns.org.
I can manually run it from the prompt with /etc/rc.d/init.d/ddclient start
and can verify that it works by checking that my IP has succesfully been changed at dyndns.
When I reboot though, during the startup, I get the following:
Starting ddclient: /bin/bash: ddclient: command not found [FAILED]
I am very new to Linux, so I am not sure what or where I should be looking to solve the problem. It seems to me that it must be looking in the wrong spot for ddclient, but I don't know what to check or change to point it at the right place.
recently i have upgraded my centos 5.0 or 5.1 installation using 'yum upgrade' to centos 5.4 since the upgrade I am unable to print any PDF files as landscape, they get printed but do not seem to be rotated and are aligned a little bit less than when using portrait (test using the GUI and LP)
when printing a text file in portrait and landscape everything goes well tested on labelprinter Brother QL-580N and tested on Samsung SCX-5530FN Laserprinter both using the network I already tried 'yum downgrade cups' this works but with no success
Wanted to double check if I've done something stupid in my update, or whether this is a known issue.
$ python
>>> import wx
Traceback (most recent call last):
File "<stdin>", line 1, in ?
[code]....
So far I have came across three options.
1. Watchdog script
2. Daemontools - using "supervise"
3. Monit - open source monitoring tool
From what I can gather, daemontools is probably the best option. Unfortunately, the documentation on the developers site is very vague and I'm having a hard time getting this to work. I think I have it installed correctly, just don't know how to apply it to the service I want monitored.
how to get daemontools to work. All I want to do it monitor a server on my linux box. When it fails, I want it to be restarted automatically.
I'm trying to figure out why I cannot add a machine to the Domain from the windows. in the smb.conf file, I have the proper
add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
I have a CentOS 5.5 desktop at work. I can browse the web (we are behind a proxy of course), I can use Yumex perfectly. In a word, every GUI has DNS working correctly. But, as soon as I use a terminal, either within a X session (xterm, konsole...) or in a tty, any DNS lookup will fail. So for instance, yum does not work as it complains about not being able to find the servers, wget doesn' t work... And if I try a nslookup, I get a NX Domain Fail. I feel like the servers are not doing recursion research when using command line nslookups, even if I "force" the option (adding it even if it is the default). Of course, resolv.conf is OK, host.conf as well...
View 8 Replies View RelatedIm having a major problem with mysql-server failing to install.The installation stoppes on "Running Transactions" (have tried waiting for 10 minutes). When I use Ctrl+C an error appears:error: %pre(mysql-server-5.0.77-4.el5_5.4.x86_64) scriptlet failed, signal 2 error: install: %pre scriptlet failed (2), skipping mysql-server-5.0.77-4.el5_5.4
View 2 Replies View Related