Software :: Prevent Kdeinit4 - 100% CPU Loading?
May 20, 2011
There are thousands of threads in the Internet about kdeinit4 problem and I searched them for a solution but all I got is: it's a bug, accept it. There is this solution here and I added
Code:
[DirWatch]
PollInterval=60000
as plamaiziere said, but this changed nothing.
So kdeinit4 loads my CPU 100%. Maybe someone has figured out how to prevent this from happening? I use IceWM but have KDE fully installed because I use a lot of apps from KDE group.
View 1 Replies
ADVERTISEMENT
May 21, 2011
I am running 11.04 and would like to stop the loading of the parport and lp modules. I put entries in the /etc/modprobe.d/blacklist.conf file and ran update-initramfs -u. After a reboot lsmod shows both modules as being loaded.
View 1 Replies
View Related
Jan 29, 2010
I want to use my BootIt NG boot menu. How would I go about installing Debian 5.0.3 and prevent Grub from loading into MBR? I don't remember being asked by the installer where to put Grub. Unlike Fedora where you can choose MBR or boot section of the target partition. Debian 5.0.3 -
View 2 Replies
View Related
Feb 24, 2011
How can I prevent a program loading on startup? The program does not appear in Preferences / Startup Applications. I want to avoid having to sudo kill all programname every-time I login.
View 2 Replies
View Related
Mar 5, 2009
I am trying to prevent the dm_mod and friends from loading during install.I am installing by PXE boot with NFS and kickstart files over http. This works fine for other machines.Ok, I have a Dell PowerEdge 2900 III with 8gig ram, PERC 6/i raid controller.The raid has 8 1TB drives in it, so the total size of the device is >2TB.There is also an SATA drive, which is NOT on the raid controller.
The problem is, I want to install CentOS on the SATA drive. The SATA drive comes up as a device-mapper drive, with a big crazy device name.This is ok, but the problem is, when the system goes to boot, it just says 'missing operating system'.I can't boot from the raid because it is large enough to require a GPT partition, and CentOS says it can't boot from a GPT partition.The SATA drive would work FINE if I could just prevent the damn device mapper from loading, so that I could install on the SATA drive in ordinary SATA mode.
I have tried re-squashing the stage2.img with /etc/modprobe.conf with alias dm_mod off and such, no luck.I also tried adding an /etc/modprobe.d/blacklist file, that did not work either.I also tried putting blacklist= dm_mod in the kickstart file, but that seems to be a fedora-only option and it kills my install. any ideas on preventing the dm_mod et. al. from loading at install time??
View 1 Replies
View Related
Aug 22, 2010
I am using ubuntu 10.04 and made some changes in Xorg.conf to try enabling twinview. Unfortunately, Ubuntu just stops at the startup logo now. Is there a way I can stop the loading of X, so I can undo the error in Xorg.conf and hopefully make Ubuntu load normally again? Grub automatically loads Ubuntu, there is no Grub menu that allows loading of some alternative config.
View 1 Replies
View Related
Sep 9, 2010
KDE update a number of components in tonights update. When I have gotten this error the past I could simply delete the .kde folder in my home directory and KDE would rebuild one and start. Doesn't work this time.Am I missing something or has something failed to download and install properly
View 1 Replies
View Related
Jan 9, 2011
So I closed out X with ctrl+alt+backspace, and when I did startx it showed the Nvidia splash screen like usual, then shows for just a second that loading splash screen that KDE does. Then a little box pops into the top left corner that says "Could not start kdeinit4. Please check installation." I hit okay on the box, it takes me back to the terminal. I try again, same result. I reboot. Same result. So I use xwmconfig to change to enlightenment, which boots up fine. So I ctrl+alt+backspace out and retry KDE again, with the same problem.
This is the first time I've closed out KDE in over a week, so I guess its possible that anything I've done over that time may have somehow broken it. I hadn't noticed any problems til now. The only reason I did it this time was because I'd changed the KDE plasma theme and I wanted to watch the new one boot up. I'm typing on the same computer and the same Slackware installation right now, just running E instead of KDE.
View 14 Replies
View Related
Sep 8, 2011
I am using opensuse 11.3. I am encountering a problem while trying to log in. The problem message was
"could not start kdeinit4. Check your installation"
I tried to solve this problem by following the instructions given in OpenSuSE 11.0 Could not start kdeinit4... i.e., I opened yast2 and then I had to select "software management" from there in order to update all the packages in kde4. But I got another error when I clicked it.
/usr/lib/YaST2/bin/y2base:/usr/local/lib/libstdc++.so.6: no version information available (required by /usr/lib/YaST2/plugin/libpy2wfm.so.2)
The error list continues. I cannot type whole error list ending with similar wordings as above as am using different computer. I tried to solve this one too by following the instructions in Relocation Error but I could not understand its line "...fixed the problem by taking /usr/local/lib out of ld.so.conf, and then running ldconfig" as am new to linux.
View 5 Replies
View Related
Mar 29, 2011
My configuration is OpenSuSE 11.4/KDE4/32bit. I am noticing that for about 20 minutes (or more) after first login every time there is a process which takes 100% CPU for most of the time and, of course, slows everything down. The system monitor suggests it is the 'tracker-miner' process (whatever that is). Do I need the tracker-miner? What good does it do? Is there any way to stop it (not to start it)?
View 2 Replies
View Related
Oct 21, 2010
Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
View 3 Replies
View Related
Apr 9, 2010
I've a folder named "lynx" in my desktop . It contains ebooks - pdfs,chms etc . The problem is sometimes when i open the folder in nautilus , the folder keep loading forever and sometimes it shows two or three files and keep on loading . But at some other times , folder contents are displayed just as any other folder(i.e normal ).
View 5 Replies
View Related
May 12, 2010
I installed Drupal and there is only one site. It I access the website [url] where Drupal is installed I can easily see it functioning properly. But on internet it is not loading properly the colors etc are not visible properly.
Following changes were made to all the sites
Code:
View 1 Replies
View Related
Oct 27, 2010
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
View 5 Replies
View Related
Jun 26, 2011
I know I need a better title, but don't have one.
The problem is when watching a video F15 Gnome decides to send me to the unlock screen. Think that's what it's called. So I have to type in my pass.
A little bit later, same thing. So how can I prevent it from happening?
View 2 Replies
View Related
Apr 6, 2010
Actually I'm not sure that it's swapping like mad: I've done more testing and it looks like there may some interference causing the noise that may be correlating with network usage. I'm accessing a MacMini (with MacOS X 10.4) from my Linux machine using VNC. My Linux machine has 4 GB of ram and I run a lot of various apps on it and I've got no issue at all. It's all snappy and don't hear the hard disk swapping/read/writing too often. Now with VNC, the hard disk is swapping like mad. When I'm moving things on the OS X desktop. So I was thinking of creating a ramdisk and forcing the temp VNC files to go into that ramdisk but the problem is I can't find any temp files.
I've attempted to do that:
#!/bin/bash
while [ true ]
do
lsof | grep vnc
done
The VNC version I'm using is this one:
$ vncviewer -version
VNC Viewer Free Edition 4.1.1 for X - built Jan 30 2009 19:33:16
Copyright (C) 2002-2005 RealVNC Ltd.
No matter how much data is coming from the Mac, there should be plenty of memory (4 GB of ram) so there's really no reason to swap like crazy.
View 1 Replies
View Related
Jan 9, 2010
My linux prevent CDs autorun! i wanna know what to do?
View 1 Replies
View Related
May 11, 2011
Formerly I add a user to the file "/etc/ssh/sshd_config" and run service sshd reload, so that this user can login.Now the user is gone and I have to block this user. I did as follow:1. Take out the user name from "/etc/ssh/sshd_config" and run 'service sshd reload' again. But this user can still log in.
View 3 Replies
View Related
May 30, 2010
I have configured a DNS server on my RHEL 5.0 machine.
I have just come across a term Denial-of-Service attack (DoS attack) or Distributed Denial-of-service attack (DDoS attack).
how can I prevent my DNS server from DoS attacks.
View 5 Replies
View Related
Oct 23, 2009
when I am doing a "yum update" I receive now a long list (~94MB) because of the latest CentOS 5.4 release.I am running CentOS 5.3 on a virtual machine (virtuozzo) and had already problems to install 5.3 before. To not lose the installation I do not want to update to 5.4 but of course I want to get all updates for 5.3.How can I configure my CentOS 5.3 to update the server only with 5.3 patches/releases and how to prevent it to update to 5.4?
View 7 Replies
View Related
Oct 25, 2010
I want to prevent grub-pc from automatically creating links to other operating systems on my laptop. Whenever there is a kernel update, grub.cfg ends with links pointing at my Windows 7 installation - I want to get rid of those links. At the moment I am doing that by manually editing the grub.cfg file and it has always worked that way. I tried to force grub-pc to avoid creating links to Windows by renaming the relevant scripts in /etc/grub.d edbarx@edbarx-pc2:/etc/grub.d$ ls 00_header 05_debian_theme 10_linux 20_linux_xen _30_os-prober _30_otheros 40_custom 41_custom README As you can see I added an underscore to the files that I don't want to be executed.
I think this can be solved by changing the file permissions of the unwanted scripts making them impossible to execute.
edbarx@edbarx-pc2:/etc/grub.d$ ls -l
total 52
-rwxr-xr-x 1 root root 6433 Aug 7 18:10 00_header
-rwxr-xr-x 1 root root 1474 Jul 16 18:46 05_debian_theme
-rwxr-xr-x 1 root root 4252 Aug 7 18:10 10_linux
[Code]....
View 11 Replies
View Related
Apr 29, 2009
I'll spare the details, but is there a way to use iptables to do the following:
Allow all port 80 traffic to work for squid, yum ,etc. but prevent firefox from talking to port 80?
(That way if they don't use squid proxy, it won't work)
View 4 Replies
View Related
Jun 11, 2010
Some body is using my domain name [URL] and sending spam emails to users from his server using my domain name. how to prevent this.
View 3 Replies
View Related
Jun 17, 2011
I searched and only got the screen program, and the drop down menu only shows options from 1 min to 1 hour.
View 6 Replies
View Related
Jun 17, 2011
I there anyway to prevent Fedora from going to sleep / hibernate.
View 1 Replies
View Related
Jan 1, 2010
How do I get wedged and how to prevent it
Dec 26 15:33:36 linux-k9cr kernel: [12130.034091] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
Dec 26 15:33:36 linux-k9cr kernel: [12130.034601] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
Dec 26 15:33:36 linux-k9cr kernel: [12130.043483] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
or does this require a bug report
View 2 Replies
View Related
Jul 11, 2010
I'm currently copying a large number of files over a network. To monitor progress, I tried running watch du. However, the output never changed (or not much, not sure). find . -type f | wc -l always gives me the same number of files as does ls -R. It seems, these programs use caching, which is, in general, a good thing. Does anyone know, though, how cache usage could be controlled? I'm on an Archlinux system and I'm working on an ext4 fs on an encrypted hd.
View 4 Replies
View Related
Jan 28, 2011
How to change this sequence to, for example "Ctrl+Fn+F1" or temporarily disable it?@related: How to send Ctrl+Alt+F1 to window (to switch terminal remotely, not locally)?
View 1 Replies
View Related
Mar 17, 2011
I am running a shell script from a rc file in Linux. The shell script is going into a loop which runs for 8 hours. Now I want to prevent the shell script from running when Linux boots or I need to find a way to kill the shell script when it is running. I tried using killall, kill $! and Ctrl+C etc. Nothing seems to work. Can you suggest a way out. I am new to Linux.
View 2 Replies
View Related
Jul 7, 2011
I have synergyc process that starts at boot. How do I prevent this process from starting? I've searched /etc, /etc/init.d for some configs or scripts but found nothing.
View 2 Replies
View Related
