My Linux system shows a current time with the date command that is 12-14 minutes behind the time shown by my DirecTV satellite receiver or my wife's MS Vista system. ntpd is running; it's polling several ntp servers; ntpstat claims that the system time is accurate to 11ms.
View 8 RepliesI did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
Ever since a standard update a couple weeks ago I've had a myriad of problems, the biggest one though being boot time. Here's what happens when I turn on the machine: From bootloader (splash) to kernel loader (blinking cursor) = 50 sec. Kernel loader to splashscreen = 20 sec. Splashscreen to login prompt = 55 sec.login prompt to keyboard working = 26 sec. (wireless, wired works right away) Logging in to Desktop = 25 sec. 176 secs = ALMOST 3 MINUTES UNTIL I'M IN THE DESKTOP!!
That's worse than Vista. I've tried a number of things. For the Bios I read disabling floppy helps. I tried installing bootchart to see what's going on but it won't load save the .png file..? I installed bum and disabled some services. I tried profiling in grub... Nothing has made anything any better.
No idea why it takes so long for my wireless keyboard to start working. I'm really not sure where to start here since it's loading so slow at every point of the startup process.
I am running my Ubuntu 32 bit server on top of Windows 7 64 bit with VirualBox. It's a 2 core Atom. It's been working good for about half a year. But the last about 6 weeks the system time only in Ubuntu is going slow. About -8 per 24 hours! I can only guess because I have more things running in my Windows 7 and Ubuntu.
I can set it right by coping the hareware time to system time with this command:
Code:
hwclock --hctosys
I want to run a crontab to have that command run every minute. But it don't seem to run.
[Code]...
I have a Dell Vostro 200. Have been running Ubuntu on it for 18 months - no probs. Recently it became very slow to boot. 5-10 minutes before Ubuntu startup screen appears. Have installed Ubuntu 10.10 (on a reformatted hard drive) today. No change. It's fairly certain to be a hardware problem but I don't know where to start.
View 3 Replies View RelatedJust installed yesterday - and I love it so far except my wireless turns on for about 5 minutes, then disconnects.
In order to get internet back I have to either restart or uncheck "Enable Networking" and then recheck it.
I will try to provide as much information, but like I said I am new to Ubuntu and there is some things that are completely different from what I'm used to on Windows:
Wireless Adapter: Netgear RangeMax Next Wireless PCI Adapter WN311B
Additional Driver its Using: Broadcom STA wireless driver
Router: Netgear RangeMax
Information From "sudo iwconfig":
Code:
I am using Debian sid 4.1.3-1 and when i shutdown the system it takes 3 - 5 minutes before actually shutdown, there is only a black screen until the hdd led start flashing and after that the system finally shutdown. The weird part is that sometimes it happen in less than 30 seconds , how can i figure out where the problem is ?
View 8 Replies View RelatedI want to run a script that runs after every 15 minutes that i will do using crontab. But in script want to search a string from the last 15 minutes logs in log file containing data of whole day.
how i can search the string according to time difference that is logs from from current time and current time - 15 minutes.
Sample logs are as follows:
26-Aug-2010 16:38:46,055|9172310750|subscription_app|31ba267e%3A12aadd47bdc%3A50e9|ChargeAmount|ChargingIntercep tor - subscriber details processed sucessfully- {arg0.referenceCode=balanceEnquiry:true;subsChannel:Unknown;channelType:Subscription;transactionId:3
[Code]....
I'm running Fedora 12 on an Acer Aspire One with KDE. The built-in wireless works without a problem EVERYWHERE except at work. It's a shared wireless connection using WPA/WPA2 security.I can connect but it's "hit-and-miss" if I can do anything with it. Somedays it works well for a few minutes then has a period of inactivity - then slow - randomly receives...It worked flawlessly when the computer was running Windows7 no one else has connectivity issues but I'm the only one using Linux.
View 2 Replies View RelatedI made a clean install of Ubunto 10.10 on my Compaq Presarion F700, nVida graphics, AMD Turion 64x2.Installation was fine.When I boot, it takes a lot of time, 5 minutes or more.Also, after the system loads I get those applet errors I've attached. Sometimes I get all the applet errors and sometimes it get few of them.I tried several configs of "GRUB_CMDLINE_LINUX_DEFAULT" but still no luck.
View 2 Replies View RelatedOur home broadband (TWC/RoadRunner/San Diego) intermittently drops out for minutes at a time. In WinXP, I had a logger that would ping one or more sites (e.g. Yahoo.com), log the ping times, and display the data in an interactive graph. This was very useful in showing the ISP tech (I didn't know about Shibboleet then).The problem is still unsolved after two visits, but now I'm using Ubuntu 10.04. I'm looking for a similar tool. I'm a Linux newb (i.e. "just write a script" isn't helpful at this point), so I'm hoping for something user-friendly with a GUI.Can anyone recommend a Linux utility that...Logs ping timesDisplays results graphicallyDoesn't require advanced Linux skills to set up
View 1 Replies View RelatedI'm running Fedora 14 and set the screensaver (in System>Preferences on the Gnome GUI) to activate after the computer is idle for 30 minutes. After the screensaver is activated, and a press a key or the mouse, the screen is back to normal -- no problem.After the screensaver has been activated once, however, it comes back on very quickly -- usually in 2 or 3 minutes if the computer is idle. The only way I have found to correct this (and set activation back at 30 minutes again) is to log out and back in again.How can I correct this, and automatically set screensaver activation back at 30 minutes each time the normal screen is reactivated?
View 1 Replies View RelatedBeing a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
I'm using mencoder to capture audio from a Encore ENLTV-FM3 video capture device. I have recently noticed that, since one week ago, when the machine was forcibly restarted due to a power outage, all recordings are slightly pitched, they play back slower than they should.
I narrowed down the problem to the following command line:
$ time mencoder -really-quiet -tv driver=v4l2:device=/dev/video1:chanlist=us-cable:audiorate=32000:alsa:adevice=hw.1:input=0:amode=1:normid=11 -endpos 00:10:00 -ovc copy -oac pcm -of rawaudio -o test-32000.wav tv://69
real 9m54.886s
user 0m5.536s
sys 0m1.740s
$ ls -l test-32000.wav
-rw-r--r--@ 1 martin martin 76800000 Mar 15 17:20 test-32000.wav
Somehow, mencode managed to gather precisely 10 minutes worth of raw audio in 9m 55s. That's not physically possible, unless the capture device's A/D converters are "overclocked". I can't think of any other explanation besides hardware failure. Can that be? Could it be that something got burnt during the power outage and now the capture device's internal clock went nuts?
Since the machine's restart, I've also noticed dmesg is flooded with entries like this:
CE: hpet increased min_delta_ns to XXX nsec
Which seem to indicate that the computer's high precision event timer is somehow out of sync. Does this have to do with the audio issue? Can it be that the audio converter's sample rate is linked to the HPET? I'm totally lost here. Has anyone bumped into something similar?
I'm running CentOS with cPanel, configured to update every night.This morning my SSH login time was really slow:Code:login as: chrillechrille@example.com's password:After this step it takes about 60 seconds before I get logged in:Last login: Sat May 30 15:27:54 2009 from addr-no109.tbcn.abc.comchrille@homer [~]#I have also noticed that my PHP SOAP (network communication) calls has been really slow, and I sometimes get e-mails saying that exim is out of tcp connections.Seems like something has updated wrong this night, but I can't figure out what. I have looked in /var/log/messages and /var/log/secure, but they give me no clue.
View 6 Replies View RelatedAnybody else experiencing slow login times with 11.3 KDE? It's taking 40 seconds from the login screen to the desktop. It's a clean 64-bit11.3 KDE install.
View 8 Replies View RelatedMy boot time is extremely slow on ubuntu 10.10, on the order of 5 or so minutes. I've attached my var/log/bootchart
View 1 Replies View RelatedI purchased an AZiO BTD-V201 USB 2.0 Micro Bluetooth Adapter for my ubuntu 10.10 system and the bluetooth transfer time is very slow. I am trying to transfer files to my xoom tablet. A 157mb folder is stated to take 1 hour and 30 minutes. Is there anyway that I can speed this up. The device is less than 3 feet from my pc.
View 2 Replies View RelatedI have been using Karmic as a tool to extract important data from Windows Operating Systems where say viruses have necessitated a complete reinstall. I run the Karmic install disk and use the 'try before installing'option. It works well and I am able to 'rescue' anything I want by saving to a USB drive.Problem is that Karmic does take a relatively long time to load on a 'slow' PC.Does anyone have any suggestions on a 'slimmed down' Ubuntu that could be used in the same way which will load up quickly ?In most circumstances all I want to do is mount the C Drive of the stuffed PC and copy files to an external USB drive.
View 5 Replies View RelatedHow do I speed up the Macbook Pro boot time? In OSX when I boot it goes directly to the mac logo. In Ubuntu there seems to be a 10 second or more hesitation before it access my hard drive. Is there anyway to change some settings in the BIOS / EFI?
View 6 Replies View RelatedI've seen this issue mentioned before, but it appears their cause was different than mine.Here is a snippet of my dmesg log:
Code:
[ 2.797917] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.798077] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.798149] sr 3:0:0:0: Attached scsi generic sg1 type 5[code]....
I'm not exactly sure what that is or why that's causing it to take so long to do.
I've noticed over the past few months that my internet connection speed (D/Ls, browsing) are getting incredibly slow, but only on my linux box (my laptop, for instance, is fine - in fact, I'm dual-booting with WinXP and it isn't happening there, so I think I've managed to narrow it down to the OS alone):
View 8 Replies View RelatedI got a message today telling me that there where 78 updates available. One of them was Kernel 2.6.29.6-213.fc11.i586 and when I installed all the updates and rebooted, my startup time was very slow. And when I checked the boot.log I noticed this:
Code:
Enabling the nvidia driver: *** glibc detected *** /usr/bin/python: free(): invalid pointer: 0x00f0e24a ***
[code]...
I'm using Fedora 12 since 2 years lately, I really enjoy this S.O., it's quite robust and wonderful, but a couple of months ago it is really slow to boot up when startup the computer, I've checked everything, but seems to be ok, I had a partition lost arround that date, but recover successfully, it happens when I run gparted that It cannot see partition on my 500 GB disk, but still boots up. When running Mandriva live cd, it can see (?) all partitions on that disk, even with Fedora Dolphin I can access this partitions. What could it be?
View 6 Replies View RelatedMy hardware:
AMD Athlon X2 4800+ (2,5 GHz) + 2 GB DDR2 memory
MSI K9N V2 (nforce 520)
SAMSUNG HD250HJ (SATA, 250 GB)
I'm using OpenSUSE 11.2 with all the released updates are installed. I've got an Windows Xp SP3 on the same hard drive and it's works fine. S.M.A.R.T. says the hdd is 100%. A few days ago I realized that the boot time increased and the hard drive operations takes way too much time. So currently the boot sequence takes 11-14 minutes.
I've already tried to solve this problem but no effect:
1.) cleaned up the root directory to create more free space
2.) plugged the sata cable to another port
3.) changed from AHCI to IDE and reverse in BIOS settings
4.) added ahci, sata_nv into the /etc/sysconfig/kernel file and created a new initrd
5.) searched for problems in the syslog
Just to imagine how slow is currently the system/hdd:
My wife and I have:
iPhone 16GB 3GS on iOS 4.2.1 (not jailbroken)
iPhone 32GB 3GS on iOS 4.2.1 (not jailbroken)
We're running Ubuntu 10.10 and syncing our phones with Rhythmbox 0.13.1. It's painfully slow and skips songs sometimes. For 1500 songs, it's taking up to 5 hours. This is insane. I updated my apt sources and can mount our phones just fine. Syncing slowly is the only issue. I've read a ton of other reads about iPods having this issue as well, but not only were those issues never resolved by I haven't seen one with the actual iPhone.
I'm running a dual partitioned (Vista / Fedora 11 x86_64) Intel X25-M Mainstream SSD.
Whilst Vista boots in about 15 seconds, Fedora takes around twice as long; in fact far longer than Fedora 9 on my old Western Digital Raptor drive.
Is this to be expected, or might I have some sort of configuration problem? Has anyone else had similar experiences?
My laptop boot up time increased considerably (10 seconds) after allocating a virtual drive for virtualbox guest. The guest installation did not work so i removed it along with the virtual disk. Now everytime when i boot to ubuntu, after inputting my password in the login screen, it takes much longer to load the system. And during the loading time the disk activity indicator light blinks indicating the harddisk is actually busy loading the system.
I decided to search around for a possible answer and force reprofiling ureadahead does the trick Now boot time is back to what it used to be
I have been using ubuntu for a while and i like it a lot, im a web developer and i have windows xp installed in virtual box, i moved completely to linux and just use windows to test in ie, it had been a while since i didnt use windows and i had to use in the last few days and noticed how much faster it is, the thing that bothered me the most is when opening folders in the desktop or the recycle bin, in windows its instant, in ubuntu opening a folder takes a long time to open nautilus, is this normal or is my installation bad, any comments are appreciated, i dont want to abandon ubuntu, i really like it but it really bothers me that nautilus is so slow to open.
View 9 Replies View Relatedeverytime if more that 10-15 people using internet at same time squid proxy slow to responde everyweb just keep loading and here my squid proxy settings
1 nic
squid proxy 2.7 stable 9
ubuntu 64bit
intel duo core
[Code]...