I purchased an AZiO BTD-V201 USB 2.0 Micro Bluetooth Adapter for my ubuntu 10.10 system and the bluetooth transfer time is very slow. I am trying to transfer files to my xoom tablet. A 157mb folder is stated to take 1 hour and 30 minutes. Is there anyway that I can speed this up. The device is less than 3 feet from my pc.
View 2 RepliesI'm using fedora 13 x86_64 on amd machine. I use usb bluetooth dongle. The bluetooth service doesn't start at all. When I click on bluetooth icon-preferences-turn bluetooth on, after some time it says, bluetooth is disabled. What should I do to enable bluetooth?
View 1 Replies View RelatedWhenever I transfer a movie into my 16GB USB flash disk, my whole system becomes windows-like and unusable!
When i drag the file(s) into the USB disk folder, it starts out fine and pretty darn fast (25mb/sec) then slowly decreases until it's unbearably slow (3m/sec) and as a side effect my whole system starts deteriorating. I basically have to wait for the file to finish transferring before i can use my desktop again!
This has been happening with every version since Karmic (all 64bit)- I put up with it because I don't use the USB stick that much.. but lately it's been my go to source for transfering large files to/from work.
1. How can i send songs directly from rythmbox playlist to my mobile over bluetooth.
2. How can i go to folder containing song from rythmbox playlist.
when i try to transfer a file via bluetooth ,i turn bluetooth ON but i can't toggle "visibility" ON......how do i do it...I even can't add a new device....how do i then transfer file via bluetooth...?
View 4 Replies View RelatedHas anyone had any luck with OBEX file transfer on an f14 machine? I have a Samsung Hue SCH-R500 that works fine transferring files as long as I use a windows machine to do the work. With my f14 machine I can mount and list the folders but it says (Folder contents could not be displayed, Message did not receive a reply(timeout by message bus)). This is also the case with my f14 laptop.
View 3 Replies View RelatedIt's a pity that Wi-Fi is used only for network and internet connection. There's no information on a thing that can seem so simple - file transfer via Wi-Fi.I can imagine it similarly to how Bluetooth does it (or Wi-Fi spot search which is already implemented), but no, it requires complicated LAN setup.What I want is an easy cross-platform solution to transfer files via Wi-Fi.
View 1 Replies View RelatedI am working on Ubuntu-10.4 and I want to transfer 'hello.txt' file form my computer to mobile phone (Nokia 7210).When I run command, My mobile ask for accept the connection from ubuntu (device name connected to ubuntu). I accept the connection, Then I got the error log given above.
View 4 Replies View RelatedI am running my Ubuntu 32 bit server on top of Windows 7 64 bit with VirualBox. It's a 2 core Atom. It's been working good for about half a year. But the last about 6 weeks the system time only in Ubuntu is going slow. About -8 per 24 hours! I can only guess because I have more things running in my Windows 7 and Ubuntu.
I can set it right by coping the hareware time to system time with this command:
Code:
hwclock --hctosys
I want to run a crontab to have that command run every minute. But it don't seem to run.
[Code]...
how to transfer files from my mobile phone to my opensuse 11.4 pc via bluetooth? ntw i need to buy a bluetooth car or equivalent maybe is there something common, chip and easy to set up?
View 1 Replies View RelatedI have installed bluez libs,utils and all the requirements for bluetooth communication. And i am able to scan other bluetooth devices around. Will somebody please suggest me on how to start writing code for file transfer in bluetooth. Or can I get any packages online to do that for me. I am using RHEL5 and x86_32.
View 6 Replies View Relatedi have a bit of a problem and it seems i am not alone, google gave me a lot of hits but no solution.i'm running a dual-boot system on my laptop.
ubuntu 9.10 is installed on ext3
windows xp sp3 on ntfs
files are on another ntfs partition
if i want to copy a file (or folder) bigger than 250mb my laptop literally gives up until the file transfer is complete. opening up a terminal via keyboard shortcut gives my an idea how long a ice age can last.this happens with ext3 to ext3; ext3 to fat32; ext3 to ntfs and ntfs to ntfs.today i wanted to backup some files (12GB ~4k files) the first 4gb ran with 20MB/s (all open applications grayed out). after 2h i came back to see that only 6GB where done.
Is there any solution for slow file transfers experienced when copying files to usb in 10.04?
View 2 Replies View RelatedI have been transferring files over the network. But I am sure It should be HEAPS faster than 8MB/sec
View 5 Replies View RelatedI was trying to copy a few files to my phone via bluetooth when the file transfer window popped up with the progress bar stating "Connecting" and an error: the name org.openbox.client was not provided by any .service files..
I am using: openSUSE 11.3
Gnome 2.32, Kernel 2.6.38,
obex-data-server 0.4.5-12.2,
[code]....
I have 8.04.3 server-32bit. It is on an HP 2.3ghz Pent 4 with 512 mb of RAM.I had previously installed Ubuntu and Kubuntu in a dual boot with XP (actually had a triple boot with XP, Ubuntu, and a BETA Windows 7) for a while, Grub got messed up so I ended up wiping it and just put my XP back on it. I have been intimidated by the command line and when thinking server, I tried the 30 day deal with windows Home server, its OK but it's $100.00 for the permenant version.
Anyway, I manned up to the challenge, installed Ubuntu server, set up as SSH and Samba. I administer from PuTTy and WEBMIN, I tried TightVNC but the GUI seemed very useless, so on a reinstall I went headless.The problem is I have alot of MP3 files I want to transfer back to the server that I had previously transfer to and back again from the Windows server, it was sceamin' fast compared to this. I have found threads talking about using NTFS, I have the EX3, or whatever the Ubuntu format is. Could that cause slow transfers, from NTSF through Samba to Ubuntu?
Transfers went from minutes to hours when I went from kernel 2.6.31-19 to kernel 2.6.31-20. I booted back to -19 and its works great again.
View 1 Replies View RelatedI am running ubuntu 10.4 lts desktop and ubuntu 9.10 server with the gui active. On both of these machines the data transfer rates over usb and lan have slowed down quite considerably. Also over multiple devices, not the same hardware everytime I try to transfer something.
View 2 Replies View RelatedFor the past week+ I have been experiencing very slow file transfers, moving files from one HDD to another - both internal, connected with SATA, should anyone care.. When I move any file, regardless of its size, it is moved with 1.1 MB/sec at very best That's a major pain in the behind, even for moving small amounts of data! If anyone could point me in the right direction, or give me a solution
View 9 Replies View RelatedI have read many threads but cannot find a solution on this code...
Now no matter how i transfer if its from HDD to HDD or to SSD i never get more then 18-20MB/sec, i just tried booting to my live CD and was able to transfer with 24-25MB/sec
This is really slow, since the worst (2.0TB) can do a minimum of 30 READ
Anybody got any ideas, this seems to be something that has plagued ubuntu for years, and no i don't want to try other distros, i tried almost all of them a year ago and finally went with ubuntu
I'm at the end of my rope here. And the most frustrating part is, I've found many posts all over the web from others who have had similar problems, but they ALL seem to be older distros and those solutions don't work for me. "Find Similar Threads" only yields one thread, and I don't have the file mentioned in the answer (the original poster didn't either).
Computer: AMD 64 Quad core, USB 2.0 on front bus, dual booting Vista and Ubuntu 10.10
Device: New Sansa Clip+ 8GB mp3 player
Problem: When I transfer files to my mp3 player in Ubuntu, I max out at about 150 KiBbps. It's painfully slow - it takes me half an hour to transfer 300 MB worth of albums. I had similar problems with an older player that may have been usb 1.1, but this one is brand new. And when I switched to Vista (first time in months, thankfully), I was able to transfer the same files at upwards of 3 MBps. I know that flash devices often can't write anywhere near the max speed of USB 2.0, but obviously it can do a whole lot better then 150 KiBps!So, same hardware, same files, different OS - the problem must be with my Ubuntu config.
Accessing photos on my Nokia N97 mini via Bluetooth was lightning fast on 10.10, but on 11.04, each click on a folder (via Nautilus) takes well over 1 minute to display the next level and to swap from 'Icon View' to 'List View' with around 90 photos in a folder didn't complete after several minutes at which point I cancelled out. To select 5 photos took 1-2 mins but after an initial wait, the actual transfer was fairly fast. I've a MSI U100. Connection via Bluetooth works without problem.
View 1 Replies View RelatedI'm experiencing slow speed transfer between two wireless connected laptops running ubuntu 9.10. Using SSH to tranfer files between these two laptops, which connect to the internet via a wirelesss router, with good speed. This is why I'm surprised by this low speed : 52.3 KB/s, averaging 3 hours and 31 minutes for a 700 Mb movie. Is there any way to make this faster ?
View 3 Replies View RelatedI've just managed to access my windows share from Ubuntu but am now getting write speeds (to xp share) of only 9MB/s over my wired network, anyone have any ideas as to why this may be? I've googled but can find no specific answer.
My NIC is:
Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
(from lspci) on a Dell studio 1737)
I am trying to move over 1 Terrabyte of files from a two terrabyte drive into my Ext4 drive where Ubuntu 11.04 is installed. The two terrabyte drive is where my winxp used to be and it's currently paritioned into three partitions. I would like to reformat into a single partition that's why I'm moving the files.
When moving the files from the 2Terrabye NTFS partition into the Ext4 partitioned drive, the best transfer rate I could get is 11 megabytes per second. When I transfer from one NTFS drive to another NTFS drive, I could get as high as 70megabytes per second in WinXP. Is there a way to speed up the speed transfer?
Otherwise, the file transfer dialogue says it would take 26 hours to move all the files!!!
Edit: both drives are internal drives connected via a sata II.
I have a 500 gig external usb, and a few 8 gig flash drives. If i copy a file (say a movie or large file) from my primary hard drive (80 gig WD formatted to ext3) to a usb drive it transfers very slowly, about 2 mb/s. But if I copy a file off my secondary internal drive (40 gig seagate formatted to ntfs) it transfers full speed (25-30 mb/s) Its also very slow transfering between internal hard drives (again, no more than 5 mb/s) I checked and as far as i can tell both drives are running in DMA mode. Any reason my primary seems to be causing this bottleneck? it seems to preform fine otherwise (as it is the drive with my ubuntu installation on it)
View 4 Replies View RelatedI would like to know if it is normal to experience 10MB/s data transfer rates during copying between partitions on my local hard drives (Toshiba 250GB 5400rpm SATA) while having three times faster (30MB/s) transfer rates between local partitions and USB drives (Kingston 8GB).
View 2 Replies View RelatedHas anyone else had an issue transferring large files to external usb drives ? What seems to be happening is it will float right along until it gets to the last couple of megs and then just sit there for a few minutes. The larger the file the longer it sits there. I am having the problem with both an external 1 gig usb HDD and two separate thumb drives. All of which have been verified as functional and fast under other systems. All of the drives are formatted in NTFS for portability in the field. I also do not believe this to be a hardware issue as it does it on my daily driver as well as my laptop.
This is the kernel I am running
Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux
All the drives were automounted.
I have a 500gB USB drive connected to my laptop for backups and filestorage. But I can't get it to play nice with Midnight Commander. My transfer speeds max ut at 2MB/s wich is painfully slow when moving large files such as movies. Worker FM transfers the same files to the same drive much MUCH faster (not sure by how much, though). This leads me to the conclusion that the problem lies with MC.
View 5 Replies View RelatedI tried using my USB to transfer a 500MB file, the speed came up as 1-130 kb/s. That is pathetic. I should be getting more 25MB/s.
View 14 Replies View Related