Software :: Mythwelcome - Auto Shutdown And System Clock Not Working Properly
Mar 29, 2010
I installed Mythbuntu 9.04 about 9 months to a year ago and (for the most part) I haven't had any problems with mythwelcome, automatic shutdown or the system clock. The "for the most part" relates to the fact that the clock on mythbuntu has always been 4 minutes fast. Then, just last week, the system started acting up - for some reason the system clock changed to 8-10 minutes fast (6 minutes faster than it was previously). To fix this problem, I have tried manually setting the "time and date" setting, and I have also tried setting the "time and date" setting to sync with an internet server. Lastly, I tried changing the system time through the motherboard bios. In each situation, mythwelcome would initially start up with the correct time. Then, several seconds later, the time shown in mythwelcome would change to being 4 minutes fast (as I described above). The time would also be 4 minutes fast when I enter the frontend.
I was willing to live with this, but the weird part is that when I start the system now (assuming I don't have any programs scheduled to record), mythwelcome boots up fine and I see the indication that "MythTV is idel and will shutdown in XXX seconds". Then, it flashes to "MythTV is idle" - like it used to; except now, it doesn't flash back to the countdown for shutting down mythtv. One time when I started the system when I was adjusting the time as mentioned above, I noticed that mythwelcome went to the "MythTV is idle" around the same time it changed the clock to 4 minutes fast - I think there is definitely a correlation here.
I checked out all the settings and nothing else has been changed that would otherwise affect MythTV from shutting itself down. The other interesting part is that I can get the shutdown countdown back if I go to "Utilities / Setup", "Setup", and "Mythbuntu". In the popup screen I choose "MythTV Configuration" and select "Launch MythTV Setup". I get a popup box that says that the mythbackend must be closed (as expected). Then I immediately exit mythtv-setup and the system runs "mythfilldatabase". I exit the Mythbuntu Control Centre and exit the frontend. When I get back to mythwelcome, the shutdown countdown comes back.
View 1 Replies
ADVERTISEMENT
Dec 13, 2009
When I first boot my computer the Panel clock displays UTC time for about the first 2-3 minutes then switches to Local (UTC-5). My hardware (BIOS) is on UTC. Running KDE 4.3.1 on openSUSE 11.2 64 bit. I dual boot Mint 8 64 bit also and it starts correctly with local. Not the end of the world but I have never saw this behavior before.
View 1 Replies
View Related
Apr 30, 2010
i am using ubuntu 8.04 and i am facing a problem of mounting external pen drive, exernal harddisk or even other /dev/ partitions in my login mount is not working so i manually mount the partition by mount command .. but i dont know how i can resolve this problem ...
fdisk -l currently returns as
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
[code]...
View 1 Replies
View Related
Nov 12, 2010
First post here so I'll do my best to provide the information needed.
System:
Dell Poweredge R310
Xeon 3460 2.8Ghz
4x2GB ram
4x 160GB Sata 7.2k (RAID 10)
Ubuntu Server 64bit
If I type as root, "reboot" or "shutdown -r now", nothing happenings - except the apache2 process stops + the usual "System is going down for reboot now". If I type "shutdown -h now" the system goes down.
Upon booting the server back up, MySQL starts correctly, but Apache2 does not - I have to run "service apache2 start", and it starts up fine.
I feel the 2 issues are related. I've reinstalled apache2 completely (configs and all) and this didn't help - I used yum to install/reinstall it.
View 8 Replies
View Related
Jul 22, 2011
After NFS mounting some system folders (i.e. lib, usr) of a slave cluster node to /lib & /usr located on the master cluster server I got into some problems: I forgot Ubuntu 10.04 was installed on this particular slave node, while the master node runs 9.10. Now, I am not able to unmount these folders using umount, or restart the system using shutdown, I get some error: " /lib/libblkid.so.1: version `BLKID_2.17' not found". Is there an alternative way to unmount these NFS shares, or to restart the system to undo the mounts? The systems are located elsewhere, so just physically restarting the system would not be the preferred option.
View 2 Replies
View Related
Apr 20, 2011
basically in the child process iam just calling the ptrace(PTRACE_TRACEME, 0, NULL, NULL) system call but if add this stsyem call rest of the code not working properly. i found the reason basically what happening is when we have ptrace() system call its printing the same variable 3 times i.e its not executing it 3 times but just it is printing 3 times .iam just wondering how it could be possible.
View 1 Replies
View Related
Aug 10, 2010
I have a problem with sshd daemon on a target linux system:The system has only one user (root) without password.The sshd_config looks like:
Code:
Port 22
Protocol 2
[code]...
View 8 Replies
View Related
Apr 13, 2010
I am using Fedora 12. I have the following problem, when i working with system-config-samba dialog:I add the new user on the server:as following:
Unix username: vova
Windows username:test
As described in Customisation Guide for Red Hat 9: "If the user has a different username on a Windows machine and will be logging into the Samba serverfrom the Windows machine, specify that Windows username in the Windows Username field."So i logged from the Windows machine not under test(Windows username) but under vova.And i logged in without the problem. However it seems that samba should check windows username=test (as have written in samba-config) and ask an password for different users. And additionally, if samba check the currect user in Windows itself and verify it with Unix user, what for we need write the Windows username in samba config? I don't understand
View 6 Replies
View Related
Jul 7, 2010
When I'm on windows 7 my core i3 processors automatically clocks down when not much CPU power is needed. Somehow I have the idea that ubuntu 10.04 doesn't auto clock down my CPU when idle. I can tell by the short life my full battery has on ubuntu. Only 2hours compared to 5 on windows 7. Is there a way to manage this? So that the CPU automaticly adjusts it's clock settings?
View 3 Replies
View Related
Mar 30, 2011
I am currently running a VPS with Ubuntu Server 10.10. I have been trying for a few days now to get some programs to run when the system starts, but with no luck. I am trying to use rc.local to do this, there is an:
/etc/init.d/rc.local - http://paste.monsterprojects.org/mpbjhwhbjzhbjrr (Was already on the system, I have not edited this)
and:
/etc/rc.local - http://paste.monsterprojects.org/mpbjhwhbkkkhwez
If i run the /etc/rc.local script manually all the programs start fine, and if i run /etc/init.d/rc.local start, all the programs start fine. But for some reason they just don't seem to be starting when the system boots.
View 3 Replies
View Related
Feb 2, 2011
I've installed Alarm Clock and was planning to use it to shut down my PC at a certain time every day. What command would I use to execute the shutdown, "sudo shutdown -P" ?
View 5 Replies
View Related
Oct 25, 2010
I have a very weird issue here. At work I have a machine that runs ubuntu 10.04.1 and whenever I do a "shutdown -h now" the system shutsdown for a few seconds and the comes back up again.
The system itself is a HP DC7900 SFF machine. It was the network setup along with wild flying magic packages that caused this.
View 2 Replies
View Related
Jul 9, 2010
I am unable to shutdown the ubuntu system properly. As i click the logout button, the desktop icons and taskbar and everything disappears and only i can see the wall paper... Then i hav to do a hard shutdown by pressing the power button...
View 2 Replies
View Related
Mar 25, 2010
I'm sure there's an underlying hardware problem for this... but I figured I'd start here as I do not know the specific hardware issue.
I'm in Ubuntu 9.10 (Ubuntu Studio actually) and my computer will not shut down properly. I get the splash, then a black screen, then something like #terminating processes, #closing connections, #blah blah blah, #will now halt(or will now restart if rebooting)
View 10 Replies
View Related
Aug 17, 2010
I have noticed my server do not shutdown properly sometimes.It should do it with this command in a cron with root session /sbin/shutdown -h now
View 3 Replies
View Related
Feb 4, 2010
How to Schedule auto shutdown in Ubuntu? I am a newbie. Last night I have some downloads in progress while at the same time I really wanted to go asleep. So I wondered if there's a way to schedule auto shutdown the system after a set period of time. I heared its possible using command line but dont know the usage.
View 9 Replies
View Related
Dec 9, 2010
I have an mysql innodb ~ 20gigs. Normally shutting down mysql (service mysql stop) takes a few seconds. When I reboot Ubuntu with the reboot or shutdown command it just reboots it super fast without mysql logging (/usr/sbin/mysqld: Shutdown complete) Also during this shutdown the following is failed: umount2: device or resource busy /data: device is busy.
mysql is setup to read from /data . Why is ubuntu not waiting for mysql to properly shutdown before unmounting the filesystem and rebooting?
View 1 Replies
View Related
Jul 1, 2010
I just installed apt-get hibernate and when my computer shuts down, it will go to a recovery menu. I have to end up killing the machine.
Also when I try to hibernate the machine this error msg will appear: hibernate:Warning: Tuxonice binary signature file not found.
How should I rectify this error?
View 9 Replies
View Related
Jun 6, 2010
I have an user space application that performs file I/O operations, when a SIGKILL is captured, some routines are done first to ensure that all I/O operations are completed before rebooting the application or system. My question is, this won't work if the power button is pressed or the power supply is disconnected, so there can be incomplete I/O operation or corrupted data written into the file, so is there a way to prevent data corruption or at least complete any ongoing operation when this scenario happens? Assuming there is at most 1 second before the power really went out, can I/O be still completed?' I'm running the application on a busybox 2.6.14 kernel on an embedded system board.
View 1 Replies
View Related
Jan 12, 2010
in windows I have this little program called "poweroff". I use it to shut down my pc after vlc stops playing a movie. I set vlc to shut itself down after playing, and then the program starts a countdown to shutdown the pc. is there a similar program for ubuntu? could this be achieved through the command line? I'd like it to give me little warning period though, where I still have the option to cancel.
View 2 Replies
View Related
Jan 15, 2011
I am wondering if there is already a feature, and if not, then a way to save any open files before a shutdown occurs?
I use xfce4 battery plugin and there is the option to invoke a shutdown whn the batt. hits critical percentage, but I would like to be able to run something at the low percentage stage to save any open files in case the critical stage is reached. I have had no luck googling any solutions or potential solutions.
View 3 Replies
View Related
May 10, 2011
I found an application AUTO POWER ON & SHUTDOWN in windows which is really very useful to those who have night unlimited broadband connection. I searched for similar application in UBUNTU as I am slowly shifting to UBUNTU from 10.04 (maveric) version. Whenever I search for application or for other options, so many have written failed attempts only.
View 5 Replies
View Related
May 19, 2015
I know the problem has been partly solved in this old thread [URL] .....
Now we have Jessie as stable, yet LXDE doesn't shutdown properly:
On the same computers, Wheezy LXDE shut down very fast
I installed Jessie from the netinstall image.
On a 2007 computer, it's like the old days with a Pentium II running some version of Puppy Linux or Slitaz. The system shuts down after a while but the computer remains on.
On a 2013 laptop, I added the line init=/bin/systemd in the Grub default file as advised on the old thread above. The laptop shuts down after a while, the system first, then the hard disk goes to sleep, then all the leds are off.
If I run the magic command, the computer shutdowns in a breeze, perhaps even quicker than good old Wheezy:
Code: Select all# systemctl poweroff
Now, is this still a systemd bug? Doesn't look like it since the systemctl command works. Is it an LXDE bug? Looks like it in a way - if the LXDE shutdown button enabled the systemctl poweroff command, I suppose the button would work?
Is there a way to make the LXDE shutdown button run the systemctl poweroff command?
I'm glad Wheezy is still with us because I wouldn't install Jessie for newbies — they'd think shutdown (through clicking on a button) is even worse than in Windows.
View 2 Replies
View Related
May 2, 2011
The startup and shutdown displays are a series of vertical black and white lines, and the text displayed on them appears as more or less white blobs. Otherwise, the displays when 11.04 is running are fine, but this startup looks so naff it would be nice to change it so that the diplays can be read. I would hate to demonstrate Ubuntu to someone and have to explain such a display.
View 7 Replies
View Related
Jun 22, 2011
Laptop : Dell Latitude D620 - Intel Core2Duo T5500 1.66GHz - Intel 945GM graphic - 2GB DDR2 667 RAM - Samsung 400GB SATA 5400rpm Harddisk. OS : Debian Squeeze amd64 - Gnome. I browse the web with this laptop,with ethernet connection,with Icewesel running 2 tab,just after 5 minutes,it auto turn off itself. Never happen before,I don't know what happen. This laptop only support 2D,there's no 3D graphic driver,so no visual effect apply. I start the laptop after 10 minutes,type sensors and get this output :
acpitz-virtual-0
Adapter: Virtual device
temp1: +46.5°C (crit = +126.0°C)
* Before it auto shutdown,I place my laptop on desk with a simple rack to lift the rear from desk about 5cm,without cooling pad,and no direct wind flow from my desk fan as I always did.
View 1 Replies
View Related
Aug 27, 2010
Is there some file I can alter on the Live CD image that will make Ubuntu not automatically eject the drive tray when I shut down from a live CD session?
[URL]
/etc/rc0.d/S89casper is a link though, so I just edited the file it points to (/etc/init.d/casper) -- seems to be working. I merge a modified "casper" at every boot, next time I build a Remastersys, I'll try to make it permanent.
View 9 Replies
View Related
Mar 18, 2010
in order to do full backup system, i have to shutdown the oracle database. My backup software can stop the services by running the shutdown script. But in order to shutdown the oracle database, the script must be run under oracle privilege. The conflict is our backup system which is reside under root privilege cannot run the oracle shutdown script which is needed to triggered by oracle privilege.
View 1 Replies
View Related
Jan 14, 2010
When i use the shutdown-command in the terminal as root, it nearly works. It starts to shut down, and it looks like all programs and the kernels shuts down. I end up with a black screen, sometimes with the ubuntu-logo on, but it never powers off. I have to force it off by holding the power button. When i use the graphical interface to shut it down, it works perfectly. The poweroff-command works without problem too.
Here is the command i use:
Code:
View 4 Replies
View Related
May 2, 2011
I install Opensuse 11.4 on KDE environment then I changed to XFCE. I don't know how to configure for computer auto shutdown after a period of time don't use it.
View 6 Replies
View Related
Mar 29, 2010
I didn't notice any relevant complaints regarding 11.2 in the archives. The bootup & shutdow may be different problems. Randomly my recent install boots up fine or hangs with a blank black screen. A Ctl Alt F2 gets me to a prompt. Startx returns a lockfile comment that X is already running.
From here I can shut 11.2 down and restart it OK. There must be a bootlog kept in /var somewhere. I haven't tried the non-automatic bootup. The shutdown randomly drops back to the logout screen. Usually a shutdown command from there will shut it down. Sometimes shutdown doesn't work, but restart will finish the shutdown.
View 9 Replies
View Related