Software :: Kaffeien Installation - ERROR: Could Not Find Cdparanoia Headers
May 10, 2010I have bt3 installed i am trying to install kaffeien on it but its giving some error
ERROR: Could not find cdparanoia headers.
I have bt3 installed i am trying to install kaffeien on it but its giving some error
ERROR: Could not find cdparanoia headers.
I'm trying to install snort-2.8.5.3 on centos5-i386 an I get this error from ./configure --with-mysql --enable-dynamicplugin command:
ERROR: unable to find mysql headers (mysql.h)
checked in the following places
/usr
/usr/include
[Code].....
I've read here it has to do with libmysqlclient12-dev. How can I install libmysqlclient12-dev on centOS?
Is it possible to install snort from repositories using yum?
I am trying to install kcachegrind and during the ./configure phase I got the following error:
Checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
Now I guess I have QT installed and I tried to do the following:
./configure --with-qt-includes=/usr/lib64/qt4/include
but that did not work either.. actually checking further I found that the folder include is missing in usr/lib64/qt4/ !!!!
So what should I do... for you info I am listing below the output of:
yum list *-devel | grep -i qt
qt-devel.x86_64 1:4.5.3-9.fc10 @updates
qwtplot3d-qt4-devel.x86_64 0.2.7-6.fc9 @fedora
PackageKit-qt-devel.i386 0.3.16-1.fc10 updates
PackageKit-qt-devel.x86_64 0.3.16-1.fc10 updates
PyQt-devel.i386 3.18.1-5.fc10 updates
PyQt-devel.x86_64 3.18.1-5.fc10 updates
PyQt4-devel.i386 4.6.2-3.fc10 updates
PyQt4-devel.x86_64 4.6.2-3.fc10 updates
QtRuby-devel.i386 4.3.3-4.fc10 updates
QtRuby-devel.x86_64 4.3.3-4.fc10 updates
SoQt-devel.i386 1.4.1-9.fc9 fedora
SoQt-devel.x86_64 1.4.1-9.fc9 fedora
avahi-qt3-devel.i386 0.6.22-12.fc10 updates
avahi-qt3-devel.x86_64 0.6.22-12.fc10 updates
avahi-qt4-devel.i386 0.6.22-12.fc10 updates
avahi-qt4-devel.x86_64 0.6.22-12.fc10 updates
dbus-qt-devel.i386 0.70-4.fc9 fedora
dbus-qt-devel.x86_64 0.70-4.fc9 fedora
dbus-qt3-devel.i386 0.9-1.fc10 fedora
dbus-qt3-devel.x86_64 0.9-1.fc10 fedora
libprojectM-qt-devel.i386 1.2.0-3.fc10 updates
libprojectM-qt-devel.x86_64 1.2.0-3.fc10 updates
php-qt-devel.i386 4.3.3-4.fc10 updates
php-qt-devel.x86_64 4.3.3-4.fc10 updates
polkit-qt-devel.i386 0.9.2-1.fc10 updates
polkit-qt-devel.x86_64 0.9.2-1.fc10 updates
poppler-qt-devel.i386 0.8.7-7.fc10 updates
poppler-qt-devel.x86_64 0.8.7-7.fc10 updates
poppler-qt4-devel.i386 0.8.7-7.fc10 updates
poppler-qt4-devel.x86_64 0.8.7-7.fc10 updates
qt-devel.i386 1:4.5.3-9.fc10 updates
qt-qsa-devel.i386 1.1.5-5.fc9 fedora
qt-qsa-devel.x86_64 1.1.5-5.fc9 fedora
qt3-devel.i386 3.3.8b-17.fc10 fedora
qt3-devel.x86_64 3.3.8b-17.fc10 fedora
qwtplot3d-qt4-devel.i386 0.2.7-6.fc9 fedora
zbar-qt-devel.i386 0.8-5.fc10 updates
zbar-qt-devel.x86_64 0.8-5.fc10 updates
I am trying to build Pidgin on my Lucid install and on running configure, I get the following:
Quote:
configure: error: You must have GLib 2.4.0 or newer development headers installed to build.
If you have these installed already you may need to install pkg-config so I can find them. I tried installing pkg-config, but it's already in its newest version. I then tried going to the following website
[URL]
and downloaded and extracted glib on my computer. That changed nothing. I was hoping someone could tell me what's going on here. I just tried the this:
Quote:
sudo apt-get install libgtk2.0-0
and got
Quote:
libgtk2.0-0 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Search the forums first. Well I did, can't find anything I understand.
So please help an ignoramus in simple terms.
The problem:-
I'm trying to run vmware workstation and I get a desktop box pop up which says "Kernel .heade4s for version 2.6.37.1-1.2 desktop not found"
How do I find them and install please.
I am trying to install a piece of software that uses an install.pl script which looks to /usr/src/linux/include/ for my kernel headers...but it never finds them or that directory/link.
I've run "yum install kernel-devel kernel-headers" so I am pretty sure they are installed.
My "rpm -qa | grep kernel" returns code...
What am I missing?
After compiling the linux kernel VMware is unable to compile it's modules.
I installed the kernel source to code...
C header files matching your running kernel where not found
Any ideas how to solve?
Something go wrong with php and Apache, at first, the $GLOBALS array is looking like this
Code:
Array
(
[code]....
Make menuconfig doesn't find ncurses headers on my system, howerver ncurses-devel package is installed. I get the following error message:
Code:
make menuconfig
*** Unable to find the ncurses libraries or the
[code]...
Actually I need to install configure file of NRPE 2.12 for monitoring the SUSE machine from NAGIOS(Linux machine). But once I am trying to install configure file of the NRPE 2.12 its giving error "cannot find SSL headers". I downloaded libssl-dev files which are in the format of .deb but its not getting install on SUSE.
View 5 Replies View RelatedI'm trying to use module-assistant to add the vboxdrv using instructions also found here in the debian forum. However, m-a can't find the linux-headers because it looks for the package linux-headers-2.6.32-5-trunk-686. I attempted to specify were the headers were by using:
m-a prepare --kernel-dir /usr/src/linux-headers-2.6.32-5-686/
but also doesn't work. Instead, I get the error:
Bad kernel version specification at /usr/bin/m-a line 566.
Anyone knows how to work around this?
By the way, the reason I am doing this is because when I installed virtualbox (following the instructions in debian wiki) there's no vboxdrv. When I try to modprobe it, I get:
FATAL: Module vboxdrv not found.
I am tying install part image but ı receiving an error message like this:
#./configure
configure: error: SSL Headers not found.
i am using ubuntu 9.10 64bit
After install CentOS 5.3, when execute yum update in a terminal, with root I had this error:
yum update
Loaded plugins: fastestmirror
Config Error: File contains no section headers.
file: file://///etc/yum.repos.d/CentOS-Media.repo, line: 17
' #file:///media/cdrom/
'
I think I have something wrong with the repositories but I'm not sure.
I have this error :
Code:
configure: configure: error: X11 development libraries/headers not found
i try to run yum update and now i get this error Config Error: File contains no section headers.
[code]....
I installed VMWare WorkStation 7.x.x . When It started that I have taken "Kernel Header" error and It want to enter path of Kernel. I tried many commands ;
yum -y gcc kernel header
uname -r
2.6.18-238.19.1.el5xen
rpm -qa kernel-devel
kernel-devel-2.6.18-238.19.1.el5
Actually, It uses same kernel but VMWare is not working. I searched about Kernel Headers error when run VMWare on Internet. But I couldn't solve my problem.
I've been trying to install Vmware Workstation and keep getting an error about Kernel Headers missing! Although I am pretty sure I have the headers installed for my system. It's looking for the PAE version of my headers which I believe it doesn't exist!
View 13 Replies View Relatedm using fedora 13 gnome while installing glib m getting error
configure: error: *** Working zlib library and headers not found ***
I'm trying to install some nvidia drivers but I need to install the correct headers. uname -r says: 2.6.31-21-serverbut I can't find the headers anywhere to install. 2.6.31-21 and 2.6.31-21-generic are installed but not the server version. It's not showing up in synaptic and using apt-get I get the error message in the title.I have 2.6.31-22-server headers but for some reason when I boot into 2.6.31-22 the OS can't see my 3ware cards and, obviously, the arrays they control. So, I can't use 2.6.31-22 yet.
View 9 Replies View RelatedI need help about the error in my website. I have the following error....
Code:
user warning: Got error 134 from storage engine query: SELECT data, created, headers, expire, serialized FROM cache WHERE cid = 'theme_registry:database1' in /var/www/html/web/includes/cache.inc on line 26.
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies View RelatedIve also tried downloading RPMs to a usb stick and it said it was the wrong ones for my machine.
How do i find out if my machine is x32 x64 x86?
Anyway im trying to install kernel headers and devel from the fedora installation disk but i dont know how to get to the cdrom thru terminal as i cant copy the RPMs to desktop by drag n drop or using software installer.
I dont have an internet connection to the pc so i cant use yum (which would make things so much easier) so can anyone tell me how how to install these packages thru terminal?
I am trying to install gcc v4.3.3 from the source on ubuntu 11.04. I get the following error
and it got exit from the installation.
Error:-
/usr/bin/ld: cannot find -lc
collect2: ld returned 1 exit status
make[3]: *** [libgcc_s.so] Error 1
I try to googled for this particular error, but I could not find any solution.
I want to make by pendrive bootable with ubuntu 9.10 netbook remix iso. I'm currently using windows. I downloaded the iso and extracted usb-creator.exe out of it and ran it. I get the error Cannot find python26.dll. How do i fix this. I'm using a netbook with windows vista.
View 2 Replies View RelatedI am installing Ubuntu 10.10 server on my HP proliant microserver using the USB flash drive option. the install goes great until the time when it copies files for the setup (after the keyboard setup) and the error message comesw up (can't read CD rom drive)?I have used serveral flash drives and used universal usb installer several times. however the installatioon alwasy gets stuck there.
View 1 Replies View RelatedYesterday, I think I did something stupid: I removed kernel-headers, gcc, glibc-devel and glibc-headers. My box is a CentOS 5.4 webserver (it has loads of packages installed, but that was done through Virtualmin config, so it's quite coherent all in all). The thing is that now I need to reinstall at least the headers and glibc, but hey! this is what I get :
[Code]...
i've downloaded and installed ubuntu 9.10 (64bit) using Wubi on win seven(x86)(with the "loader Extr.me" ). (The PC is an amd 64 x2)
At first restart appears the dualboot, I choose ubuntu but appears this message:
Try (hd0, 0) NTFS5: No wubildr
After one minute:
Try (hd0,1) invalid or null
Try (hd0, 2) invalid or null
Try(hd0, 3) invalid or null
Try (fd0): invalid or null
and then:
Error: Cannot find GRLDR in all devices. Press Ctrl + alt + del to restart.
I am on ubuntu 64 Bit and I am trying to install my (by now relative old) copy of Maple 8.0.
I start the installer script, and get:
Error: can't find libjava.so
libjava.so is located at:
/usr/lib/jvm/java-6-sun-1.6.0.21/jre/lib/amd64/libjava.so
I've tried installing Ubuntu from the installation disk, flash drive, and using windows installer. The drive and disk said I didn't have enough memory open to install (I have 160GB open)upon looking around in the demo, i noticed that it couldn't find my hard drive as it wasn't on the drive explorer. So i searched for answers and found a few possible ones but i wanted to find someone with my exact problem--Couldn't find any. So then I came upon the Windows Installer and Tried it out. All went well until i had to reboot, it said it couldn't find the installation.iso (which is indeed on my computer) and that i should run "Chkdsk /r" and i did. Nothing changed. I still believe that Ubuntu can't see my hard drive when windows can, why is this? Is there a way to fix it? EDIT: How could I forget to mention I'm on Windows 7?
View 5 Replies View Relatedi am trying to install: kiso-0.8.3 but when I try ./configure I recive this error >>>>>>>>>>
configure: error: Qt (>= Qt 3.2) (headers and libraries) not found. Please check your installation! For more details about this problem, look at the end of config.log