VLC does what I want, however, it often freezes up my system so that it's difficult to even kill itself. I have to do a hard reset because while playing something it gets stuck. If there's something I can do to stop that, what is it?If not, is there a more stable but equally capable alternative? I don't want to hunt for codecs.
View 13 Replies
I used to use Gwibber as social networks aggregator/client, but starting since last update (current version 3.1.0) it crashes miserably on both Fedora 14 and Fedora 15.
Gwibber team looks reluctant to provide any feedback on whether this shall be fixed in foreseeable future. Installing Gwibber from the last stable sources gives the same crash.
I am seeing an issue on a few servers where it doesn't appear all NICs in the 802.3ad lag are all operating at the same level. A few of the servers have two bonds each with two NICs in each bond.I have two NFS servers that each has 1 bond with 3 NICs.All are RHEL5 x64 2.6.18.I think the reason why I see one interface dominating RX and another dominating TX is due to the xmit_hash_policy but there are three hosts that use this particular server for network traffic.That's 3 different physical mac addresses.The layer2 algorithm should be fine in that situation I would think.Would I just be better off with balance-rr?
View 3 Replies View RelatedI am used to upload files to the web and as I have very large divirlos in equal installments over the windows used winrar but not here?
View 13 Replies View RelatedI used both pound and nginx as load balancers. With pound I had issues with SSL websites so I moved to nginx. With nginx I have the problem that it does not load balance equally between the backend servers.
I remember hearing something about another load balancing web server but I forgot its name.
Does anyone know other alternatives to nginx/pound?
I have a printed PDF Document which is comprised of Text, Lines, Boxes and so forth. I need to edit this document. I have scanned using varying forms of OCR software, the text reproduces fine, this I can edit - fine , but I cannot seem to save and reproduce the lines and boxes which is equally important. I should say that this PDF doc is also available on file on my USB stick
View 6 Replies View RelatedI am facing the issue that the PC not capable to shutdown or reboot; In order to debug that, htop tells me the running processes but all seems normal, I killed few but still cold reset is needed.There is certainly a problem somewhere. the best would be to know which process are weirdly hanging. It could make this testing debian bit better to know which package has these issues.
View 1 Replies View Related"Your system currently is not capable of hardware accelerated 3D." stupid error. anyway i finally installed fedora 11 and thought i had everything working and then i go to play a game and.. "Your system currently is not capable of hardware accelerated 3D" in ubuntu it had an alert that installed the correct graphics driver and everything was fine but fedora doesn't do that. i've been messing around with it for three days now and i'm giving up. my chipset is nvidia nforce 430(mcp61)
View 9 Replies View RelatedI have been having a problem since I switched to Ubuntu a month or two ago; infrequently, my sound will stop working. It looks like when this happens Ubuntu doesn't even recognize that I have hardware capable of playing sound, even if I just was. It replaces the Audio Output options with "Dummy Output" and has no other options.I have tried doing some research on why this is happening, but all the issues I found were the audio output never recognizing any hardware, not just stopping after a while. I tried some of those fixes anyway, but the problem just came up again today. The only way I know how to reset it is to restart.
View 3 Replies View RelatedI have FC8 on my laptop and then I wanted to test Ubuntu 8 so I installed Ubuntu and it removed the grub loader of Fedora then I repaired fedora with DVD and then it removed Ubuntu Grub. So how can I have two OS in one grub loader.I found grub.conf file in FC but couldnot find it in Ubuntu.
View 3 Replies View RelatedAfter installing 11.2, using KDE, there was a transparent folder on the desktop containing a set of icons. Like openSUSE and Online Help and a couple of others. If I clicked on it, a menu would come out of the right side of it. I clicked on the X and the folder went away, never to be seen again. I tried to find how to get it back but was unsuccessful.
After installing 11..3, using KDE, there it was again! After monkeying around with it for a while, I clicked on the X and again, it seems gone for good! I still can't find how to get it back!
Also, it seems no one else has this problem so I guess I'm just not capable of operating this computer thing correctly.
I have a strange problem regarding the connection to a LAN. I have a asus eeepc 1000H with Ubuntu netbook remix 9.10 (dual boot with WinXp). I've discovered two days ago that one of the pins from the ethernet port is pushed inside. This led to the fact that my netbook is not capable to deal with some UTP cables in the sense that it won't connect at the network through this cables. These cables work perfectly for any other computer.This is true for XP - for Ubuntu I found that it is not possible at all to connect through any cable at a LAN. There is an exception to that - my internet connection at home is done through PPPOE and I am able to access the internet through Ubuntu and WinXp.
Asus Romania won't honor the warranty (in their opinion I abused the product and it is my fault - fair enough - it is my fault since I am the single owner of the product - and I am connecting it in various locations to various ethernet cables) and in order to fix it they told me they will need to change the entire motherboard - which I guess it will cost me a price close to the price of the netbook itself - and I don't want to pay that much just for a pushed inside pin. (I wrote these to avoid questions regarding the warranty).I can live with the fact that some of the ethernet/UTP cables won't work with my netbook - but I can't live with the fact that the Ubuntu OS is not capable to connect to the internet through the ethernet port in any other locations besides my home. I require help in order to establish if there is something wrong with the Ubuntu ethernet settings or the Ubuntu OS is not capable to connect to internet through the faulty ethernet port (WinXp can).
I have a simple script that I am writing to parse an XML file for me, and update some version numbers. Basically what happens in my script is that I'm running a grep command on the file to get the current version number, then I prompt for a new number, and then I want to globally replace that version number in the file. The problem is, the sed command seems to only want literal values (it doesn't appear to be capable of resolving variables). For example, this code doesn't work:
[Code]...
I have tried removing the curly brackets from the variable names, quoting them, etc. and nothing seems to work. Should I do this with awk instead (and if so can you kindly write out the command for me because I never bothered to learn awk).
getting a VLAN router with a wan interface capable of Ethernet and AMT? something under $80-$100 pref.i need to segment a client on my home network.
View 1 Replies View RelatedI've got the latest version of Ubuntu on my machine.My Linux partition is ext4, so I need to use a Linux boot loader capable of booting from ext4.Also, I want to be able to use the UUID of my partition instead of specifying "/dev/sda3".Right now I'm using the Grub2 (or whatever the f*** it's called) that comes with Ubuntu. It's the ugliest boot loader you'll ever see, the configuration file is disgusting.So with that in mind, I'd like to change boot loader.Lilo would be OK but I can't seem to get it to boot from ext4.The older version of Grub was fine too but again I don't think it can boot from ext4.
View 2 Replies View Relatedi have installed ubuntu 10.10the wireless adapter is BCM4312when i write "ifconfig" it gives me eth1 instead of wlan0 or wlbut the wirless is working fine with me still have the problem that when i try to load airodump-ng eth1 it gives me the follwoing message:ioctl(SIOCSIWMODE) failed: Invalid argumentARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Makesure RFMON is enabled: run 'airmon-ng start eth1 <#>'Sysfs injection support was not found either
View 4 Replies View RelatedIs there any FOSS image editor in the Ubuntu repositories that is capable of saving .SVG files?
I currently have GIMP. I can open an SVG file just fine. But when I go to save it, GIMP thinks the file is a new one. When I click "Replace", an error pops up "The following file does not have a known file extension". I want to know if there is an FOSS image editor that will write SVG files, not just read them.
i work in consumer electronics, and due to company constraints on network usage, i came up with a "jail box" to test blu-ray players, TV's etc that can connect to the internet. the majority of the complaints the server addresses are mailnly "blu-ray player can't connect to the internet", etc... right now it's set up only to return pings that the devices do to test connectivity (i.e. entries in the etc/hosts file for www.samsung.com, www.lge.com, etc.).
i want to have the box actually provide DNS, samba shares, possibly a "pseudo-you-tube" link to test other functions, but the first one i want to tackle is to have the box providing actual DNS services (even though all DNS queries will after all point to the same ip address) the samba shares i know isn't a big headache, i already have it providing virtual web pages (but with no content as yet), the "virtual you-tube" page i'll tackle later. so how would i go about setting up BIND to do this? keep in mind this is a standalone box, not connected to anything but the device under test.
I bought a new computer, pretty awesome machine, AMD FX6300 with a Radeon 260X graphics. Along I bought a new Led monitor AOC with DDC/CI capability.
It is my understanding that with the DDC/CI, monitors can have their brightness controlled just like laptop screens do, but better software controlled.
This is something I have done before with nvidia graphics, the open drive had the control and the proprietary only needed a small config setting. This was done however in a dekstop iMac, the screen also LED and HDMI.
So I just freshly installed debian jessie in this setup, it seems the open source driver does a pretty good job, but still missing the brightness control and audio through HDMI doesn't work either.
Im trying to setup pwm config on this computer so that the fans wont come on to loud. Motherboard is DFI lanparty JR p45-t2rs. there is pwm hardware, as i have used pwm config in arch on the same computer. any pointers you can give me to get pwm control working on this pc? edit: during sensors detect. im told that the it87 module is needed. but i cannot load it:
mark@torrentslave:~$ sudo modprobe it87
FATAL: Error inserting it87 (/lib/modules/2.6.31-17-server/kernel/drivers/hwmon/it87.ko): Device or resource busy
mark@torrentslave:~$
I need a dev setup which is external to the box I work on at home. I.e. I need to build some form of PC capable of running basic dev tools / scm.Given its very basic needs, was thinking of finding a fanless, probably atom based, micro-itx solution. I.e. small, silent, can just sit somewhere all day with a nightly backup to a NAS. (it would be really cool then as well because I can throw it in a bag and take it places when I need to -- its wrong I get excited about that...).Just wandering if anyone has done anything similar?lightly worried about the performanceWas thinking something like the Shuttle XS35GT:but have a gut feeling I could build something better for 2/3's the price.
Friend suggested buying a simple netbook as its probably one of the cheaper ways to getting an atom powered system, and has a screen for setup. ll it needs to run is a web server, SVN/GIT, Trac, maven, hudson and artifactory. I.e. it does not need to be capable of streaming video content etc (i.e. its not a media box) for 1 user at a time. Projects are not going to be the smallest for home projects, but really in the grand scheme of things its going to be small.
I'm looking for a Linux-controllable camera or Linux-compatible webcam that can produce native resolution photos in the 8MP+ range.
The computer needs to be able to trigger the capture and download the resulting image.
I've started using Banshee to sync my ipod lately. There are a few issues with it that I can bear - having to killall natutilus every time I reconnect my ipod being one. But I'm getting a bit peeved with Banshee being apparently incapable of syncing my album artwork correctly. It downloads the correct artwork perfectly within banshee, but at the minute about half the albums on my ipod have REM Monster cover art beside them. Is there any way I can force Banshee to reset the artwork?
View 1 Replies View RelatedI'm building a cheap htpc for my garage so I can watch the news, listen to music and browse a few car forums when needed. Here are the specs I am looking at:
2 512mb ddr2 800
AMD Athlon II X2 240 Regor 2.8GHz 2 x 1MB L2 Cache Socket AM3 65W
500GB sata2 or 32gb ssd drive
Will Ubuntu be able to use a ssd? If so this box can pull movies in from my server. Which distro will play movies, watch live tv, and play music the best on the specs I provided?
I'm wondering if anyone else has this issue before I send a note off to Slackware on this.
The --current hplip package can't seem to actually complete the installation of a networked hp printer that has the printer physically plugged into the network.
The hplip app initially does detect the device, then I click next, then it says installation failed as it can't connect to the device.
Perhaps I'm doing something wrong.
I am however able to build, and run an older hplip that --current used a while back and it works splendid for adding a printer over the network.
I'm using version hplip-3.9.4b-i486-1 but I know that's not a big help to the project.
I'm looking into assembling a debian based router/firewall system. Fortunately there is a great deal of documentation available on this subject, so I am confident the project is viable. I'm a bit stumped regarding a wireless card though, especially since I'd like to use a desktop form factor rather than one of the laptop style slots. At present, I'm going with a mini-itx board that has a couple of wired nics and a pci-e x4 expansion slot (supermicro's x7spa-h). So, I can connect an access point to one of the nics and that's job done. In the interests of having one fewer box to find space for, I'd like to use a pci-e card as a (wireless n) access point. To do this I need one capable of working as a "master", rather than only as a "client".
Google suggested D-link's dwa-556. Linuxwireless.org suggests the D-link DWA-556 uses ath9k. It also thinks the ath9k driver is capable of operating as an access point. Can I take this to mean that the DWA-556 will be usable as an access point? If so, all is well, and I may go forth and find any card that uses a driver marked AP capable. If not, say because it's a hardware limitation, how do I go about finding a card that'll do what I want it to?
The whole code is written in C, C++, and Fortran. Is it possible to make it to use more than 4GB memory. Now it is always crashed when it reaches 3GB memory. If it is possible, how to set up the compiling options (or configure flags)? We can use gcc, g++, ...or intel compilers our OS: Fedora 12 x32
[code]....
qemu-img , create any imagerun qemu -fda bootdiskwin98se.img -hda image.imgand No drive C what's going wrong with qemu-img/qemu?
View 3 Replies View RelatedI'm running OpenSUSE11.3 64bits with KDE 4.4.4 (release 3). Is it safe to upgrade to KDE4.6? Is KDE 4.5 better/more stable than 4.6? Why is both 4.5 and 4.6 developed? Why not go for one version?
View 3 Replies View RelatedI've never really had a problem with ubuntu 9.4 and 9.10.In 9.10 I even used KDE 4 and even that went quite well (for being KDE 4). I have never had a freeze or crash in Ubuntu 9.4 and 9.10, and had been using those for 9 months or so. But ever since I upgraded to 10.4, many things went wrong. I think it's less than a month ago since I upgraded. Remember that I've never had freezes or crashes in 9.4 and 9.10.
Now so far I've had:
-2 times suddenly the mouse lags and I have to reboot
-1 time the screen went black and I had to reboot
-1 time KDE4 was acting strange, constantly giving messages about that it was going to disable composite rendering due to being slow. Yes, the system was slow indeed. Had to reboot.
-less stable KDE4.4 than the KDE4.3 of ubuntu 9.10: the new KDE4 version did more weird things like moving around icons when never asked for and being generally unstable
-many, very many, problems and obvious slowness due to nepomuk and virtuoso-t
-I installed KDE 3.5 after the KDE4 problems above happened. But in KDE 3.5 I've ALSO had mouse lag (after pressing "ok" on a window about installing updates).
-I use this OS mainly for Java development. The upgrade to Ubuntu 10.4 ruined all JDK 1.6 related packages and provided no easy way to install them, so I had to do it manually.
With Ubuntu 9.10, working productively went much better than with 10.4.I mean, ever since Windows 98, I've never seen anything as unstable as KDE4.4 on Ubuntu 10.4! I mean it, with what I've encountered, this comparison is really fair imho.Did anyone else experience that Ubuntu 10.4 is less stable than 9.X, or am I the only one?
