Fedora :: Graphics Not Capable Of Hardware Accelerated 3D
Oct 19, 2009
"Your system currently is not capable of hardware accelerated 3D." stupid error. anyway i finally installed fedora 11 and thought i had everything working and then i go to play a game and.. "Your system currently is not capable of hardware accelerated 3D" in ubuntu it had an alert that installed the correct graphics driver and everything was fine but fedora doesn't do that. i've been messing around with it for three days now and i'm giving up. my chipset is nvidia nforce 430(mcp61)
View 9 Replies
ADVERTISEMENT
Feb 3, 2010
I've been having a lot of problem with Linux concerning my intel830 chipset video driver. Fedora seems to have some kind of working Xorg configuration, but I cant prove it since I dont know where Xorg.conf is...
Anyway - When I try to get some kind of Desktop Effects, I get the error prompt "Accelerated 3d Graphics is not available." One reason why I think it might be doing this is because I may be using the VESA driver instead of intel, i830, or i810, etc. But again, I dont know how to check this.
View 6 Replies
View Related
Jul 30, 2011
I am new to fedora and cant find how to install the graphics card on fedora14. I have the ASUS ENGT240 graphics card ; 1GB GDDR5 powered by NVIDIA GeForce GT240; when I tried to enable desktop effects a message appeared - "Accelerated 3D graphics is not available". How to find particular driver and also the installation procedure?
View 14 Replies
View Related
Jun 5, 2011
I am using Fedora 14, last month I installed ATI graphics driver on fedora 14, as I have 256 MB integrated graphics card on motherboard and now I uninstalled that graphics driver because that was'nt working properly. Now whenever I try to open Desktop Effects from System --> Preferences --> Desktop Effects it shows me the error "Accelerated 3D graphics is not available" Desktop effects require hardware 3D support.
Now please help me to solve this issue so that I can again able to run Desktop Effects.
View 4 Replies
View Related
Sep 27, 2010
when i try to use the "Desktop Effect" , I encounter with this message : "Accelerated 3D graphics is not available" I know that there is a problem with my graphic. I had asked this question before,but my problem did not solve yet.
View 4 Replies
View Related
Jun 28, 2009
I am a Ubuntu and LINUX newbie. Install goes easy but I can not get 3D accelerated graphics to work. So I am stuck with poor and slow graphics. I tried and tried with the ATI card and went back to make onboard the primary. Neither seems to allow for visual effects upgrade nor 3d graphics in games.
Here is lspci:
View 2 Replies
View Related
Feb 22, 2011
I use a program that has 3D graphics everything has a 'laggy' appearance and freezes for short seconds. These programs included any of the games from Ubuntu Software Center, along with other applications such as games ran through Wine(seperate problem).
Things to keep in mind:
-I've downloaded the automatic updates through Ubuntu Software Center.
-I'm fairly new to Ubuntu(still learning).
-Provide as many details in, if, you post a possible solution.
-I'm only using Ubuntu 10.10 as my OS, no dual-boots with Windows or any other OS.
[Code]...
View 1 Replies
View Related
Nov 6, 2010
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
View 1 Replies
View Related
Jun 19, 2009
Have a system that previously had F9 and F10 on it, with video hardware:
Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
xorg.conf is using
Driver "intel"
F9 and F10 would pass MPEG to the video card for accelerated decoding and playback and it worked just great in VLC, MPLAYER, etc.
F11 installed (fresh install, not upgrade) and the accelerated path seems to be gone. CPU utilization goes very high when playing back any MPEG video.
Additionally, the following information is observed coming out of MPLAYER:
MPEG-ES file format detected.
VIDEO: MPEG2 1920x1080 (aspect 1) 59.940 fps 15000.0 kbps (1875.0 kbyte/s)
================================================== ========================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
[Code]....
It looks to me like the video driver is being queried whether it supports Mpeg PES colorspace, and the answer seems to be no, so then it falls back to software decoding.
View 4 Replies
View Related
Apr 11, 2011
The whole code is written in C, C++, and Fortran. Is it possible to make it to use more than 4GB memory. Now it is always crashed when it reaches 3GB memory. If it is possible, how to set up the compiling options (or configure flags)? We can use gcc, g++, ...or intel compilers our OS: Fedora 12 x32
[code]....
View 2 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Apr 9, 2010
I know that this laptop (Asus UL30A) does support playing HD material with the help of the GPU on windows. The question is how can I do this under linux? The CPU load as is implies that this is not activated. I assume that it's limited to a handful of codecs. But which player supports this, if its even supported at all?
View 2 Replies
View Related
Oct 12, 2010
I'm running the latest 10.10 and loving it, former Windows user I noticed just shortly after installing 10.4, that a few select applications would open and I would see "Starting (application name)" and then it would close and nothing else would happen. I suspect this is related to the fact that I recently took my Video Card out of my PC and Ubuntu is not detecting my Intel Chip?
View 9 Replies
View Related
Feb 20, 2010
due to a crash on window's part my computer crashed and I decided to install the latest version of Ubuntu. (9.10) However as it happened, it was actually incompatible with the usb on my computer an Acer AM5641 desktop. So I opted for 8.10 which works like a charm except for the fact that the restricted drivers for my graphics card (an Nvidia 7900 GS that I installed) don't work. After clicking "enable driver" everything appears to go as normal. Except for the fact that when I restart it, it automatically goes into safe mode, and i can't save it at a higher resolution than 800x600.
View 1 Replies
View Related
May 1, 2010
After installing Ubuntu 10.04, kept getting this popup advising me of an Nvidia accelerated graphics driver 96. After installing it my highest resolution is 640x480 and I get the following error:
"It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? Yes/No"
How do I get this thing to a 1024x768 resolution?
View 9 Replies
View Related
Aug 10, 2010
I am facing the issue that the PC not capable to shutdown or reboot; In order to debug that, htop tells me the running processes but all seems normal, I killed few but still cold reset is needed.There is certainly a problem somewhere. the best would be to know which process are weirdly hanging. It could make this testing debian bit better to know which package has these issues.
View 1 Replies
View Related
Apr 30, 2010
Total Linux & Ubuntu noob here Have setup my Dell Dimension 9200 Tower (Pentium 4, 3.2Ghz, 3GB RAM, Nvidea GEForce 9600) with Lucid 32 bit. I'd like to be able to play my 1080p mkv (.264) video library on my Ubuntu system that I use as a media centre.
What is the easiest method to get GPU accelerated video playback for above please ? I have tried the built-in Movie Player, Boxee (which I use for other videos anyway) and VLC - all of which play but with a small amount of stutter - enough to be annoying. As far as I can tell these apps do not use NVidea GPU acceleration. In all cases I have used the defaults provided either by Ubuntu/Boxee/VLC.
Is MPlayer the answer ? BTW I'm a relatively "non-tech-enthusiast" coming from the Microsoft environment. I'm comfortable with DOS command line but have never used Linux command line,
View 9 Replies
View Related
Jun 14, 2011
I've loaded 11.04 with Unity on a Dell GX260 test machine (2.4 GHz P4, 1 GB of RAM, 40 GB HD, GeForce 6200 video card). I've tried installing both accelerated video drivers, but Compiz won't start and the Additional Drivers program informs me that the driver is loaded but "This driver is activated but not currently in use." How do I put it into use? There seems to be no switch for that effect in the system controls, and I haven't found any informative posts.
View 4 Replies
View Related
Feb 1, 2011
I have been having a problem since I switched to Ubuntu a month or two ago; infrequently, my sound will stop working. It looks like when this happens Ubuntu doesn't even recognize that I have hardware capable of playing sound, even if I just was. It replaces the Audio Output options with "Dummy Output" and has no other options.I have tried doing some research on why this is happening, but all the issues I found were the audio output never recognizing any hardware, not just stopping after a while. I tried some of those fixes anyway, but the problem just came up again today. The only way I know how to reset it is to restart.
View 3 Replies
View Related
Apr 8, 2010
I have FC8 on my laptop and then I wanted to test Ubuntu 8 so I installed Ubuntu and it removed the grub loader of Fedora then I repaired fedora with DVD and then it removed Ubuntu Grub. So how can I have two OS in one grub loader.I found grub.conf file in FC but couldnot find it in Ubuntu.
View 3 Replies
View Related
Jul 11, 2011
VLC does what I want, however, it often freezes up my system so that it's difficult to even kill itself. I have to do a hard reset because while playing something it gets stuck. If there's something I can do to stop that, what is it?If not, is there a more stable but equally capable alternative? I don't want to hunt for codecs.
View 13 Replies
View Related
Jun 11, 2010
After a lot of frustration with flash on Linux (specifically Hulu), I decided to do something instead of complaining. Hardware acclerated flash is the one thing keeping Windows on my system.
Please support GPU acceleration on Linux and vote for the following bug. Mac OSX has 1000 votes. Linux has 139. Let's show Adobe that linux is just as important as OSX.
View 6 Replies
View Related
Jul 29, 2011
Just installed Ubuntu 11.04, and everything is perfect, except my video card. Ubuntu 11.04 refuses to run my labtops integrated Intel 855GM video card in OpenGL hardware accelerated mode. Everything is really slow/unresponsive compared to earlier versions, windows are rendering painfully slow etc. From what I can gather, problem is, 11.04/newest Compiz is OpenGL 1.4, and my video card only supports 1.3 (?). Now, I have tried downgrading Compiz following this link: [url]
No luck so far.. OpenGL is still software only. Do I need to edit some ini-file or xorg.conf, or am I missing something here?
View 2 Replies
View Related
Aug 12, 2010
After installing 11.2, using KDE, there was a transparent folder on the desktop containing a set of icons. Like openSUSE and Online Help and a couple of others. If I clicked on it, a menu would come out of the right side of it. I clicked on the X and the folder went away, never to be seen again. I tried to find how to get it back but was unsuccessful.
After installing 11..3, using KDE, there it was again! After monkeying around with it for a while, I clicked on the X and again, it seems gone for good! I still can't find how to get it back!
Also, it seems no one else has this problem so I guess I'm just not capable of operating this computer thing correctly.
View 3 Replies
View Related
Feb 18, 2010
I have a strange problem regarding the connection to a LAN. I have a asus eeepc 1000H with Ubuntu netbook remix 9.10 (dual boot with WinXp). I've discovered two days ago that one of the pins from the ethernet port is pushed inside. This led to the fact that my netbook is not capable to deal with some UTP cables in the sense that it won't connect at the network through this cables. These cables work perfectly for any other computer.This is true for XP - for Ubuntu I found that it is not possible at all to connect through any cable at a LAN. There is an exception to that - my internet connection at home is done through PPPOE and I am able to access the internet through Ubuntu and WinXp.
Asus Romania won't honor the warranty (in their opinion I abused the product and it is my fault - fair enough - it is my fault since I am the single owner of the product - and I am connecting it in various locations to various ethernet cables) and in order to fix it they told me they will need to change the entire motherboard - which I guess it will cost me a price close to the price of the netbook itself - and I don't want to pay that much just for a pushed inside pin. (I wrote these to avoid questions regarding the warranty).I can live with the fact that some of the ethernet/UTP cables won't work with my netbook - but I can't live with the fact that the Ubuntu OS is not capable to connect to the internet through the ethernet port in any other locations besides my home. I require help in order to establish if there is something wrong with the Ubuntu ethernet settings or the Ubuntu OS is not capable to connect to internet through the faulty ethernet port (WinXp can).
View 2 Replies
View Related
Dec 21, 2008
I have a simple script that I am writing to parse an XML file for me, and update some version numbers. Basically what happens in my script is that I'm running a grep command on the file to get the current version number, then I prompt for a new number, and then I want to globally replace that version number in the file. The problem is, the sed command seems to only want literal values (it doesn't appear to be capable of resolving variables). For example, this code doesn't work:
[Code]...
I have tried removing the curly brackets from the variable names, quoting them, etc. and nothing seems to work. Should I do this with awk instead (and if so can you kindly write out the command for me because I never bothered to learn awk).
View 2 Replies
View Related
Oct 30, 2010
getting a VLAN router with a wan interface capable of Ethernet and AMT? something under $80-$100 pref.i need to segment a client on my home network.
View 1 Replies
View Related
Mar 2, 2010
I've got the latest version of Ubuntu on my machine.My Linux partition is ext4, so I need to use a Linux boot loader capable of booting from ext4.Also, I want to be able to use the UUID of my partition instead of specifying "/dev/sda3".Right now I'm using the Grub2 (or whatever the f*** it's called) that comes with Ubuntu. It's the ugliest boot loader you'll ever see, the configuration file is disgusting.So with that in mind, I'd like to change boot loader.Lilo would be OK but I can't seem to get it to boot from ext4.The older version of Grub was fine too but again I don't think it can boot from ext4.
View 2 Replies
View Related
Mar 1, 2011
i have installed ubuntu 10.10the wireless adapter is BCM4312when i write "ifconfig" it gives me eth1 instead of wlan0 or wlbut the wirless is working fine with me still have the problem that when i try to load airodump-ng eth1 it gives me the follwoing message:ioctl(SIOCSIWMODE) failed: Invalid argumentARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Makesure RFMON is enabled: run 'airmon-ng start eth1 <#>'Sysfs injection support was not found either
View 4 Replies
View Related
Jun 19, 2010
Is there any FOSS image editor in the Ubuntu repositories that is capable of saving .SVG files?
I currently have GIMP. I can open an SVG file just fine. But when I go to save it, GIMP thinks the file is a new one. When I click "Replace", an error pops up "The following file does not have a known file extension". I want to know if there is an FOSS image editor that will write SVG files, not just read them.
View 2 Replies
View Related
