yum install libstdc++-docs doesn't work for me:No package libstdc++-docs available.So, I can only install it myself.I've found the C++ man pages here, how can I install it?I guess just put it under /usr/share/man/man3 will do the job, but I'm not sure.
How do I manually install software that I download off the net? i.e. like when I download a tar.gz or .deb file that is not found in the repository- and want to install it. I tried the old Winders(Windows) way- unzipping and double-clicking (Only in private, of course)....but I guess as most of you know...that does not work in LINUX.
I read in the manual where it says something about adding things to the repos- but they apparently have to be .pps or .ppa files or some junk..So how does one install downloaded software manually in Ubuntu?
I have jdk.rpm.bin package. When I run the command ./jdk.rpm.bin it extracts and automatically installs the package. I want to extract rpm package only and to install rpm myself not automatically.
I have downloaded the jdk-6u24-linux-i586.bin and gone through following steps. nuwan@nuwan-laptop:~/Downloads$ sudo chmod +x jdk-6u24-linux-i586.bin nuwan@nuwan-laptop:~/Downloads$ ./jdk-6u24-linux-i586.bin It works fine on me. These commands create a folder jdk1.6.0_24 in Downloads directory.
My Question is this. If I want to install packages manually.What is the best way to do it. Where should I put artifacts which generates after executing above commands. Another question, If I use sudo apt-get install sun-java6-jdk where does these downloaded packages are installed. I mean location. I have been using Ubuntu 9.10
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
how to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
I have a very old laptop its Pentium II with 64 mb ram and 5gb HD . I want to put Debian 5 on it. The problem is that it does not has a Ethernet card so I can not go online with it. It has one USB port though .I want download .deb files from (URL... ) and using my other PC and put them on usb stick and copy to that laptop and dpkg -i .
the problem is that I am a new user so I am confused how to do that as can mishandle depencies .For example if you were to manually install VLC in that laptop how would you that.
When I try to install fedora 11 from the Live CD I get the hwaddress error and cannot continue. As far as I know there is no fix for that other than installing from the full DVD, but I don't have the facility to do that.What I would like to know is if it is possible to install fedora manually for eg. create the partitions with something like fdisk and copy all the files over from the live disc to the hdd and then install grub to start fedora and use it as if it had been installed normally.
Sorry if this is a stupid question. In my head I have this idea that anaconda is some helper program to install fedora and that it should be possible to do it yourself with the right commands.
I am not the most computer savy, so bear with me. I have opensuse installed on my usb hard drive and recently had a windows crash that caused me to lose my opensuse boot menu/grub. Before the crash I had to have the usb drive plugged in in order to boot to windows or opensuse or I would get an error at startup....... I would like to avoid this. Is there anyway to make it so that when I turn on my computer It boots directly to windows, and if I want to go to opensuse then I can plug in my usb drive and manually boot to usb from my boot menu? I would run these two together on my computer but I share this computer and having to have my usb drive plugged in all the time kind of made them mad. So I guess my question is two fold..... Is this possible? And if so can I go into my hard drive through windows and place something in there to allow me to boot to it since my grub is back to the origional windows boot or do I need to use a live cd to access opensuse and do it that way?.
I have a Ubuntu system where the internet has been whitelisted so that I can't use Synaptic. I was wondering if there was a way to install GParted without Synaptic? Do something with the ISO file perhaps? Or would this turn out to be quite complicated?
I know how to install VLC via terminal sudo aptitude install -vlc But i want to know how to install VLC manually by downloading package or something like that i googled but i didn't found anything ..
how to partition. I was getting sick of having to backup my data every time I had to reinstall Ubuntu, so someone recommend that I partition my hard drive so that I could store all my personal files ( documents, music, and vidoes ) onto the seperate partition. However I don't know how to do this. Furthermore when a new version of Ubuntu is release I always pick the install on the entire hard drive so the partition i installed would end up being deleted. How do you install Ubuntu by manually specifying the partitions.
Recently got a VPS and installed Ubuntu Server 9 (32bit) When i go to install basic pages like php my admin with commands like..sudo apt-get install phpmyadmin I get a error like this:
root@PkNGssbkpT:/# sudo apt-get install phpmyadmin Reading package lists... Done Building dependency tree Reading state information... Done You might want to run `apt-get -f install' to correct these: The following packages have unmet dependencies:
I have a lexmark x2690 there is a deb package on lexmarks sight for my printer but being new to linux i am unsure how to manually install the driver I have read through a lot of documentation on installing packages but nothing has worked any help would be appreciated the driver i need to install is not listed under lexmark when you go to printer setup. The driver I need is located at [url] I tried the generic cups driver.
I am running a Dell Dimension 3000 and I intend to install Ubuntu on it. On it, there is a partition, Dell Utility Partition, which I am hesitant to overwrite. The main partition which I want to install Ubuntu on I formatted in ext4. I try to install Ubuntu from the live cd, but it won't allow me to strictly use the ext4 partition. It insists to either use the entire drive or to have me manually choose the partition. How would I go about doing that? I relatively new to Linux in general
I am trying to install ubuntu 9.1 on a 320 gig hard drive. I have manually created a 45 gig partition. When I try to install ubuntu from the cd,,, I can not install it.
How do I have to setup the 45 gigs to install Ubuntu on it? Swap partition? EXT2?
I want to install manually xcb_2.4 on Ubuntu 9.10. The problem is that the package neither contains a configure nor a install file so I cant use './configure' and 'make install'.
I think this goes here. I just installed Diablo II LOD on Wine today on my user account, which is not root, and I switched over to my brother's account I set up for him separate of mine and root and Diablo does not show up for him.How do I install a program not using the terminal or Synaptic and have the program show up for all accounts on my machine?It isn't a terrible problem. I just wanted to know how to do it.
I want to set up ubuntu 10.10 on a computer WITHOUT Internet access.I also need to install a package on it but it has several dependant libraries (eg libX11-dev)If i just have the names of those libraries & the package, where can i find them, so that they can be downloaded onto a pendrive & then installed onto the comp? (What would a library file look like after download?)
Also after i have copied the files onto the other comp (assuming that it was possible), how do i install the library? Would synaptics recognise that i have installed this library if done manually by this method?
I have centos 5.5 (64 bit) on server which is hosted in remote data center. I just noticed that crontab is not installed. Server don't have internet access so yum won't work. Is there any way I can install cron manually by installing RPM? If yes from where I can get cron RPMs ?
I accidentally removed yum, yum-fastestmirror etc. packages on Centos 5.3 after a failed "yum update" to update Centos 5.3 to 5.4. re-install yum packages manually by rpm.
I copied yum-3.2.19-18.el5.centos.noarch.rpm and yum-fastestmirror-1.1.16-13.el5.centos.noarch.rpm to my file system and tried to install by rpm. I got the following messages:
i installed centos 5 in my pc. and i installed vlc 0.9.9.rpm. while installing it is asking some dependency files. then i install rpmforge.rpm. rpmforge clears all dependency files so then i am able to install vlc on my pc very successfully. now i have a another pc with centos 5. i dont have network connection on second pc.
so i want to copy these dependency files (installed by rpmforge while installing vlc) from first computer to sencond computer(without internet) by pen drive. and want to install these dependency files manually.because rpmforge is install dependency files form internet. is it possible to install dependency file manually.
For some reason Firefox loads pages really slow on my 11.3 install. Chrome everything loads fast. I am running the latest of firefox.I have done the usual tweaks to the about:config that I found on the internet. Is there a reason for this and can I fix it?